Back to browse
A2235-H
GPS Receiver Module, SiRFstarIV, Mini Outline With Antenna
Schematic Symbol
Pin Configuration (30 pins)
| Pin | Name | Type |
|---|---|---|
| 1 | nRST | input |
| 2 | GPIO3 | bidirectional |
| 3 | VCC_3V3 | power_in |
| 4 | WAKEUP | output |
| 5 | Vout | output |
| 6 | GND | power_in |
| 7 | GPIO6/SPI_CLK | input |
| 8 | GPIO7/SPI_CS | input |
| 9 | GND | input |
| 23 | GND_PAD1 | power_in |
| 24 | GND_PAD2 | power_in |
| 25 | GND_PAD3 | power_in |
| 26 | GND_PAD4 | power_in |
| 27 | GND_PAD5 | power_in |
| 28 | GND_PAD6 | power_in |
| 29 | GND_PAD7 | power_in |
| 30 | GND_PAD8 | power_in |
| 22 | RX0/(SPI_DI) | input |
| 21 | TX0/(SPI_DO) | output |
| 20 | ExtInt/GPIO8 | input |
| 19 | ON_OFF | input |
| 18 | GPIO0/I2C_DIO | bidirectional |
| 17 | GPIO1/I2C_CLK | bidirectional |
| 16 | TM_GPIO5 | output |
| 15 | GPIO4 | input |
| 14 | Host_I2C_CLK | input |
| 13 | GPIO2 | bidirectional |
| 12 | ANT_SW | input |
| 11 | VANT | power_in |
| 10 | ANT_EXT | input |
Footprint
This symbol has no default footprint. It's typically a generic part where the footprint depends on the package you choose.