Back to browse
Bus_M.2_Socket_B
M.2 Socket 2 Mechanical Key B
Schematic Symbol
Pin Configuration (67 pins)
| Pin | Name | Type |
|---|---|---|
| 1 | CONFIG_3 | input |
| 2 | 3.3V | power_in |
| 3 | GND | power_in |
| 4 | 3.3V | passive |
| 5 | GND | passive |
| 6 | ~{FULL_CARD_POWER_OFF} | output |
| 7 | USB_D+ | bidirectional |
| 8 | ~{W_DISABLE1} | output |
| 9 | USB_D- | bidirectional |
| 10 | GPIO_9/DAS/~{DSS}/~{LED1} | bidirectional |
| 11 | GND | passive |
| 20 | GPIO_5 | bidirectional |
| 21 | CONFIG_0 | input |
| 22 | GPIO_6 | bidirectional |
| 23 | GPIO_11 | bidirectional |
| 24 | GPIO_7 | bidirectional |
| 25 | DPR | output |
| 26 | GPIO_10 | bidirectional |
| 27 | GND | passive |
| 28 | GPIO_8 | bidirectional |
| 29 | PERn1/USB3.0-Rx-/SSIC-RxN | input |
| 30 | UIM-RESET | input |
| 31 | PERp1/USB3.0-Rx+/SSIC-RxP | input |
| 32 | UIM-CLK | input |
| 33 | GND | passive |
| 34 | UIM-DATA | bidirectional |
| 35 | PETn1/USB3.0-Tx-/SSIC-TxN | output |
| 36 | UIM-PWR | input |
| 37 | PETp1/USB3.0-Tx+/SSIC-TxP | output |
| 38 | DEVSLP | output |
| 39 | GND | passive |
| 40 | GPIO_0 | bidirectional |
| 41 | PERn0/SATA-B+ | input |
| 42 | GPIO_1 | bidirectional |
| 43 | PERp0/SATA-B- | input |
| 44 | GPIO_2 | bidirectional |
| 45 | GND | passive |
| 46 | GPIO_3 | bidirectional |
| 47 | PETn0/SATA-A- | output |
| 48 | GPIO_4 | bidirectional |
| 49 | PETp0/SATA-A+ | output |
| 50 | ~{PERST} | output |
| 51 | GND | passive |
| 52 | ~{CLKREQ} | bidirectional |
| 53 | REFCLKn | output |
| 54 | ~{PEWAKE} | bidirectional |
| 55 | REFCLKp | output |
| 56 | NC | no_connect |
| 57 | GND | passive |
| 58 | NC | no_connect |
| 59 | ANTCTL0 | input |
| 60 | COEX3 | bidirectional |
| 61 | ANTCTL1 | input |
| 62 | COEX2 | bidirectional |
| 63 | ANTCTL2 | input |
| 64 | COEX1 | bidirectional |
| 65 | ANTCTL3 | input |
| 66 | SIM_DETECT | output |
| 67 | ~{RESET} | output |
| 68 | SUSCLK | output |
| 69 | CONFIG_1 | input |
| 70 | 3.3V | passive |
| 71 | GND | passive |
| 72 | 3.3V | passive |
| 73 | GND | passive |
| 74 | 3.3V | passive |
| 75 | CONFIG_2 | input |
Footprint
This symbol has no default footprint. It's typically a generic part where the footprint depends on the package you choose.