Back to browse
Bus_M.2_Socket_M
M.2 Socket 3 Mechanical Key M
Schematic Symbol
Pin Configuration (67 pins)
| Pin | Name | Type |
|---|---|---|
| 1 | GND | power_in |
| 2 | 3.3V | power_in |
| 3 | GND | passive |
| 4 | 3.3V | passive |
| 5 | PERn3 | input |
| 6 | NC | no_connect |
| 7 | PERp3 | input |
| 8 | NC | no_connect |
| 9 | GND | passive |
| 10 | DAS/~{DSS}/~{LED1} | bidirectional |
| 11 | PETn3 | output |
| 12 | 3.3V | passive |
| 13 | PETp3 | output |
| 14 | 3.3V | passive |
| 15 | GND | passive |
| 16 | 3.3V | passive |
| 17 | PERn2 | input |
| 18 | 3.3V | passive |
| 19 | PERp2 | input |
| 20 | NC | no_connect |
| 21 | GND | passive |
| 22 | NC | no_connect |
| 23 | PETn2 | output |
| 24 | NC | no_connect |
| 25 | PETp2 | output |
| 26 | NC | no_connect |
| 27 | GND | passive |
| 28 | NC | no_connect |
| 29 | PERn1 | input |
| 30 | NC | no_connect |
| 31 | PERp1 | input |
| 32 | NC | no_connect |
| 33 | GND | passive |
| 34 | NC | no_connect |
| 35 | PETn1 | output |
| 36 | NC | no_connect |
| 37 | PETp1 | output |
| 38 | DEVSLP | output |
| 39 | GND | passive |
| 40 | NC | no_connect |
| 41 | PERn0/SATA-B+ | input |
| 42 | NC | no_connect |
| 43 | PERp0/SATA-B- | input |
| 44 | NC | no_connect |
| 45 | GND | passive |
| 46 | NC | no_connect |
| 47 | PETn0/SATA-A- | output |
| 48 | NC | no_connect |
| 49 | PETp0/SATA-A+ | output |
| 50 | ~{PERST} | output |
| 51 | GND | passive |
| 52 | ~{CLKREQ} | bidirectional |
| 53 | REFCLKn | output |
| 54 | ~{PEWAKE} | bidirectional |
| 55 | REFCLKp | output |
| 56 | NC | no_connect |
| 57 | GND | passive |
| 58 | NC | no_connect |
| 67 | NC | no_connect |
| 68 | SUSCLK | output |
| 69 | PEDET | passive |
| 70 | 3.3V | passive |
| 71 | GND | passive |
| 72 | 3.3V | passive |
| 73 | GND | passive |
| 74 | 3.3V | passive |
| 75 | GND | passive |
Footprint
This symbol has no default footprint. It's typically a generic part where the footprint depends on the package you choose.