Back to browse
ADM211
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 5 receivers (tx/rx: 4/5), shutdown / enable pins, SOIC-28 / SSOP-28
Schematic Symbol
Pin Configuration (28 pins)
| Pin | Name | Type |
|---|---|---|
| 1 | T3OUT | output |
| 20 | T3IN | input |
| 21 | T4IN | input |
| 28 | T4OUT | output |
| 2 | T1OUT | output |
| 3 | T2OUT | output |
| 4 | R2IN | input |
| 5 | R2OUT | tri_state |
| 6 | T2IN | input |
| 7 | T1IN | input |
| 8 | R1OUT | tri_state |
| 9 | R1IN | input |
| 10 | GND | power_in |
| 11 | VCC | power_in |
| 12 | C1+ | passive |
| 13 | V+ | power_out |
| 14 | C1- | passive |
| 15 | C2+ | passive |
| 16 | C2- | passive |
| 17 | V- | power_out |
| 18 | R5IN | input |
| 19 | R5OUT | tri_state |
| 22 | R4OUT | tri_state |
| 23 | R4IN | input |
| 24 | ~{EN} | input |
| 25 | SD | input |
| 26 | R3OUT | tri_state |
| 27 | R3IN | input |
Footprint
This symbol has no default footprint. It's typically a generic part where the footprint depends on the package you choose.