Back to browse
LSM6DB0
iNEMO Advanced Inertial Module: 3D Accelerometer, 3D Gyroscope and Signal Processor
Schematic Symbol
Pin Configuration (20 pins)
| Pin | Name | Type |
|---|---|---|
| 19 | CS | power_in |
| 5 | RESET | input |
| 2 | DIO0 | bidirectional |
| 3 | DIO1 | bidirectional |
| 4 | DIO2 | bidirectional |
| 6 | DIO3 | bidirectional |
| 7 | DIO4 | bidirectional |
| 8 | DIO5 | bidirectional |
| 10 | DIO6 | bidirectional |
| 11 | DIO7 | bidirectional |
| 9 | DIO8 | bidirectional |
| 16 | DIO9 | bidirectional |
| 15 | DIO10 | bidirectional |
| 17 | RES | power_in |
| 18 | RES | power_in |
| 20 | CAP | bidirectional |
| 14 | VDD | power_in |
| 1 | VDD1.8 | power_in |
| 13 | LD01.2 | passive |
| 12 | GND | power_in |
Footprint
This symbol has no default footprint. It's typically a generic part where the footprint depends on the package you choose.