57 matching

Battery_Management

Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Tri-State Status Output, in SOT23-5 package

Pins

5

Pads

5

SMD

4.1×3.4

Battery_Management

Simple, Miniature Single-Cell, Fully Integrated Li-Ion / Li-Polymer Charge Management Controllers, 85mA/450mA, 4.2V, SOT23-5

Pins

5

Pads

5

SMD

4.1×3.4

Battery_Management

Li+ Battery Protection IC for Single Cell Pack, SOT-23-5

Pins

5

Pads

5

SMD

4.1×3.4

Battery_Management

Li+ Battery Protection IC for Single Cell Pack, SOT-23-6

Pins

6

Pads

6

SMD

4.1×3.4

Battery_Management

Single cell, 0.8A Li-Ion/Li-Po linear charge management controller, up to 30V input, 4.2V charge voltage, Open-Drain Status Output, Temperature sense input, SOT-23-6

Pins

6

Pads

6

SMD

4.1×3.4

Battery_Management

Single-Chip Li-Ion Charge Management IC, DFN-10

Pins

11

Pads

11

SMD

4.3×4.3

Battery_Management

Synchronous switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs and power path selector, Texas R-PVQFN-N24

Pins

25

Pads

25

SMD

4.8×6.8

Battery_Management

High efficiency switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs, power path selector and standard temperature sensing, Texas R-RGE0024H

Pins

25

Pads

25

SMD

5.3×5.3

Battery_Management

High efficiency switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs, power path selector and JEITA compatible temperature sensing, Texas R-RGE0024H

Pins

25

Pads

25

SMD

5.3×5.3

Battery_Management

1.1A, single cell Li-ion battery charger with 50mA LDO, up to 30V input, WSON-10

Pins

11

Pads

11

SMD

3.3×3.5

Battery_Management

Standalone 2-Cell (Li-Ion / Li-Polymer), 2A Boost-Mode Battery Charger With PowerPath, USB BC1.2 Detection, USB On-The-Go Boost (OTG), 4.3..6.2V VBUS, 8.2/8.4/8.7/8.8V charge voltage, 9.2V BATOVP, 1.5MHz, VQFN-24

Pins

25

Pads

25

SMD

5.3×5.3

Battery_Management

I2C Controlled 2-Cell (Li-Ion / Li-Polymer), 2A boost-mode battery charger with cell balancing for USB input, 3.9..6.2V VBUS, 3.4..4.6V charge voltage regulation range (per cell), 1.5 MHz, VQFN-24

Pins

25

Pads

25

SMD

5.3×5.3

Battery_Management

I2C Controlled Single Cell (Li-Ion / Li-Polymer) 5A Fast Charger with MaxCharge, USB BC1.2 Detection, 3.9..14V VBUS, 3.840..4.608V charge voltage range, 1.5 MHz (buck mode) and 500 kHz /1.5 MHz (boost mode), WQFN-24

Pins

25

Pads

25

SMD

5.3×5.3

Battery_Management

2/3/4 Cell Lithium-Ion or Lithium-Polymer Battery Protection AFE, TSSOP-30

Pins

30

Pads

30

SMD

7.7×8.3

Battery_Management

Voltage and Current Protection for Single-Cell Li-Ion and Li-Polymer Batteries

Pins

6

Pads

6

SMD

2.4×2.0

Battery_Management

Lithium battery fuel gauge, battery management controller for BQ769x0, TSSOP-30

Pins

30

Pads

30

SMD

7.7×8.3

Battery_Management

Lithium battery fuel gauge, battery management controller for BQ769x0, TSSOP-30

Pins

30

Pads

30

SMD

7.7×8.3

Battery_Management

Overcharge, overcurrent and overdischarge protection IC for single cell lithium-ion/polymer battery

Pins

6

Pads

6

SMD

4.1×3.4

Battery_Management

Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme

Pins

15

Pads

15

SMD

4.9×4.5

Battery_Management

Micropower USB Power Manager With Li-Ion Charger, LDO and Buck Regulator, 4.2V float, QFN-20

Pins

21

Pads

21

SMD

4.3×4.3

Battery_Management

Single cell (4.2V) programmable synchronous buck Li-Ion charger, 2A, 5.5V input, QFN-16

Pins

17

Pads

17

SMD

5.3×5.3

Battery_Management

Single cell (4.1V) programmable synchronous buck Li-Ion charger, 2A, 5.5V input, QFN-16

Pins

17

Pads

17

SMD

5.3×5.3

Battery_Management

Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, DFN-10

Pins

11

Pads

11

SMD

4.3×3.7

Battery_Management

Standalone Li-Ion Switch Mode Battery Charger, 8.9-22V input, double cell, DFN-10

Pins

11

Pads

11

SMD

4.3×3.7