| Antmicro Baseboard for Jetson AGX Thor | 1,125 | 1,387 | 10 | 180 × 100 mm | Apache-2.0 | kicad/jetson-agx-thor-baseboard ↗ |
|---|
| Myriad RF / Novena v.1r2 | 984 | 184 | 6 | 100.33 × 68.59 mm | BSD-3-Clause | The-OpenROAD-Project-Attic/KicadParser ↗ |
|---|
| PMOD proto board | 509 | 19 | 2 | 99.06 × 43.18 mm | Apache-2.0 | atoomnetmarc/PMOD-proto-board ↗ |
|---|
| HackRF One | 458 | 400 | 4 | 120 × 75 mm | CERN-OHL-P-2.0 | GitByKaliMeNope/HackRf-Circuit-Board-KiCad ↗ |
|---|
| CPArti: Artix-7 FPGA Development Board | 413 | 403 | 4 | 100 × 100 mm | MIT | Atlantix-EDA/KiParse ↗ |
|---|
| 8bit Adder Layout | 348 | 189 | 2 | 310 × 110 mm | MIT | Lopfi/8bit-adder ↗ |
|---|
| TinyTapeout 4+ Demoboard | 309 | 114 | 4 | 104.5 × 81 mm | Apache-2.0 | kicad/tiny_tapeout ↗ |
|---|
| OpenROAD Project Attic KicadParser Cases BeagleBone BeagleBone_Black.routed Layout | 275 | 272 | 6 | 86.36 × 54.61 mm | BSD-3-Clause | The-OpenROAD-Project-Attic/KicadParser ↗ |
|---|
| Two Site Automated Testbed For Evaluating ADCs Pcb Design Files ADC_Testbed Layout | 243 | 232 | 2 | 327.5 × 175.5 mm | MIT | rishikesh2715/Two-site-Automated-Testbed-for-Evaluating-ADCs ↗ |
|---|
| Kicad_projects Arduino Nano Breadboard Arduino_Nano_Breadboard Layout | 242 | 4 | 2 | 100 × 99.85 mm | MIT | Hitmare/kicad_projects ↗ |
|---|
| Real Time Chessboard | 235 | 225 | 2 | 240 × 240 mm | MIT | misprit7/real-time-chess ↗ |
|---|
| Kicad Projects 02 LED Matrix 12x16 CH32V203 Layout | 220 | 66 | 4 | 26 × 50 mm | MIT | imliubo/kicad-projects ↗ |
|---|
| Gpstracker Pcb Layout | 205 | 109 | 2 | 79.25 × 59.18 mm | MIT | blemasle/gpstracker-pcb ↗ |
|---|
| DuplexPCB Example DA26R_DA30R Layout | 200 | 195 | 4 | 85.95 × 20 mm | BSD-3-Clause | Polarisru/DuplexPCB ↗ |
|---|
| Voltage_Multiplier Layout | 190 | 40 | 2 | 685.91 × 270.36 mm | MIT | ChristosChristoforou/Voltage_Multiplier ↗ |
|---|
| Calcite60 Keyboard | 188 | 146 | 2 | 295 × 105 mm | CERN-OHL-P-2.0 | siderakb/ms60 ↗ |
|---|
| Kicad Usb Pd Power Manager Toy Layout | 179 | 125 | 4 | 26.16 × 76.2 mm | CERN-OHL-P-2.0 | flisboac/kicad-usb-pd-power-manager ↗ |
|---|
| Arisu Pcb Layout | 176 | 107 | 2 | 339.09 × 118.69 mm | MIT | FateNozomi/arisu-pcb ↗ |
|---|
| MS60 | 175 | 127 | 2 | 285 × 97.1 mm | CERN-OHL-P-2.0 | siderakb/ms60 ↗ |
|---|
| WeatherStation Hardware Meteostation Layout | 175 | 145 | 2 | 87.9 × 71.35 mm | MIT | aleksul/WeatherStation ↗ |
|---|
| Sys KEYCOOL84KEYBOARD Pcb Files Keyboard Layout | 173 | 116 | 2 | 337.41 × 120.49 mm | MIT | overlordpro-sys/keycool84keyboard ↗ |
|---|
| Nixie clock tubes driver | 170 | 227 | 2 | 192 × 97 mm | MIT | Kotbenek/Nixie-clock-tubes-driver ↗ |
|---|
| Talisman Layout | 167 | 154 | 2 | 60.99 × 60.99 mm | MIT | mzollin/talisman ↗ |
|---|
| Keyboard Layout | 166 | 109 | 2 | 330.2 × 111.12 mm | BSD-3-Clause | Cheng326CTWu/keyboard ↗ |
|---|
| KicadJE_EffectsUnit2 Layout | 166 | 91 | 2 | 100 × 100 mm | MIT | promesoft/KicadJE_EffectsUnit2 ↗ |
|---|
| KicadJE_EffectsUnit2 RevA Layout | 166 | 91 | 2 | 100 × 100 mm | MIT | promesoft/KicadJE_EffectsUnit2 ↗ |
|---|
| 4004MainBoard Layout | 162 | 87 | 2 | 95.12 × 72.14 mm | CC-BY-4.0 | novi/4004MainBoard ↗ |
|---|
| Demo Kicad | 162 | 278 | 4 | 157.48 × 91.44 mm | CC0-1.0 | kevrodriguezv/temas-kicad ↗ |
|---|
| BF-002B | 156 | 12 | 2 | 99.06 × 81.28 mm | CC0-1.0 | botanicfields/kicad ↗ |
|---|
| CAT | 153 | 168 | 4 | 65 × 56 mm | MIT | devbisme/HierPlace ↗ |
|---|
| My Keyboard | 153 | 103 | 2 | 289.5 × 98 mm | CERN-OHL-P-2.0 | siderakb/kicad-keyboard-tutorial ↗ |
|---|
| Minitirx coach ambient decoder | 153 | 121 | 4 | 160.78 × 12.04 mm | Apache-2.0 | git4dcc/RTB_D13 ↗ |
|---|
| Kicad Sharp Tests KiCadSharp Data Bitaxe Gamma BitaxeGamma Layout | 147 | 101 | 4 | 56.54 × 99.76 mm | MIT | danielmeza/kicad-sharp ↗ |
|---|
| Facade60 | 146 | 95 | 2 | 285 × 99.1 mm | CERN-OHL-P-2.0 | siderakb/facade ↗ |
|---|
| KicadJE_RIAA KicadJE RIAA RevA Layout | 142 | 59 | 2 | 100 × 91.75 mm | MIT | promesoft/KicadJE_RIAA ↗ |
|---|
| KicadJE_RIAA KicadJE RIAA RevB Layout | 142 | 59 | 2 | 100 × 91.75 mm | MIT | promesoft/KicadJE_RIAA ↗ |
|---|
| ESP32-PoE | 141 | 125 | 4 | 28 × 80 mm | MIT | ashutosh-rath02/schemantic ↗ |
|---|
| Projects Asynchronous SPDIF Mixer KiCad MIxer_SPDIF_V1.0 Layout | 141 | 167 | 2 | 99.97 × 84.02 mm | MIT | DADDesign-Projects/Asynchronous-SPDIF-Mixer ↗ |
|---|
| Amalthea Hardware REV0 Amalthea_rev0 Layout | 140 | 301 | 4 | 55.54 × 49.97 mm | BSD-3-Clause | greatscottgadgets/amalthea ↗ |
|---|
| Star PCBMERGE Examples Basic SparkFun_Thing_Plus_ESP32 S3 Layout | 139 | 72 | 4 | 22.86 × 58.42 mm | MIT | theostrichjouster-star/PCBMERGE ↗ |
|---|
| Paranoids Hackme 1 | 136 | 158 | 2 | 125 × 88 mm | MIT | theparanoids/hardware-hackme-1-eda ↗ |
|---|
| Tk95_keyb Keyboard95 DIP2 Layout | 136 | 60 | 2 | 291 × 125 mm | CC0-1.0 | phtomas/Tk95_keyb ↗ |
|---|
| IceCore Lattice FPGA Board | 131 | 208 | 4 | 50 × 50 mm | Apache-2.0 | zinka/IceCore-KiCAD ↗ |
|---|
| KiCAD Keyboard Tutorial Layout | 129 | 95 | 2 | 284.48 × 93.98 mm | MIT | BathroomEpiphanies/KiCAD-Keyboard-Tutorial ↗ |
|---|
| KiCad_parts_for_MSX Projects Msx Keyboard Msx_keyboard Layout | 129 | 45 | 2 | 505.46 × 190.5 mm | MIT | hra1129/KiCad_parts_for_MSX ↗ |
|---|
| Sonatino Kicad Project Layout | 129 | 136 | 4 | 65 × 30 mm | CERN-OHL-P-2.0 | luminationlabs/Sonatino ↗ |
|---|
| Main board | 126 | 64 | 2 | 159 × 146 mm | MIT | bitomaxsp/rca-wv98c ↗ |
|---|
| FTDI JTAG Programmer | 122 | 93 | 4 | 44.01 × 64 mm | CERN-OHL-P-2.0 | anthony-bernaert/ftdi-jtag-programmer ↗ |
|---|
| Reproduce Amplifier Rtr Kicad V5 Layout | 120 | 58 | 2 | 139 × 78 mm | MIT | sibiryakov/reproduce-amplifier-rtr ↗ |
|---|
| VersaWriter Circuit _autosave VerseWriter Layout | 120 | 40 | 2 | 60 × 120 mm | MIT | jp3cyc/versaWriter ↗ |
|---|
| Snouts Sampler UI Sampler_UI Layout | 120 | 91 | 2 | 100 × 94 mm | CC-BY-4.0 | BeagleBoom/Snouts ↗ |
|---|
| Interphase Layout | 115 | 123 | 2 | 142.24 × 132.08 mm | MIT | Durburz/interphase ↗ |
|---|
| Bakers Dozen PCB Layout | 115 | 89 | 2 | 247.65 × 82.55 mm | MIT | MaxScame/Bakers-dozen ↗ |
|---|
| MadEEG PCB MadEEGamp 1 0 Layout | 112 | 85 | 2 | 81.53 × 63.88 mm | MIT | timkoval/madEEG ↗ |
|---|
| CM5 MINIMA | 112 | 220 | 6 | 59.51 × 62.69 mm | CERN-OHL-P-2.0 | kicad/cm5_minima ↗ |
|---|
| ICE Scream | 111 | 107 | 4 | 68.58 × 53.34 mm | Apache-2.0 | vlntnmrx/ICECream ↗ |
|---|
| (title) | 109 | 92 | 2 | 80.9 × 108.18 mm | MIT | spielhuus/sconstool-kicad ↗ |
|---|
| Kicad KB45P Layout | 109 | 76 | 2 | 245.27 × 75.6 mm | BSD-3-Clause | flabbergast/kicad ↗ |
|---|
| Eurorack power Supply 8HE | 107 | 40 | 2 | 100 × 100 mm | MIT | promesoft/KicadJE-EuroPowerSupply ↗ |
|---|
| DanceConIO | 106 | 109 | 2 | 79 × 57.25 mm | MIT | ravinrabbid/DanceCon2040 ↗ |
|---|
| TGT_kicad_data ぱわこ Layout | 106 | 85 | 4 | 100 × 50 mm | MIT | sabanekko3/TGT_kicad_data ↗ |
|---|
| Trac Pcb Layout | 103 | 90 | 2 | 111.76 × 161.8 mm | MIT | tractiming/trac-pcb ↗ |
|---|
| USB Hub Project ProjektUSBHUB Layout | 102 | 73 | 4 | 75.42 × 134.39 mm | MIT | Qeps/USB-hub-project ↗ |
|---|
| Choc Keyboard Layout | 102 | 79 | 2 | 311.95 × 106 mm | MIT | girishji/choc-keyboard ↗ |
|---|
| Fan32 | 101 | 83 | 4 | 63.5 × 74.02 mm | CERN-OHL-P-2.0 | PfannenHans/fan32-hardware ↗ |
|---|
| FP2800A-Tester | 99 | 87 | 2 | 66.04 × 68.58 mm | BSD-2-Clause | Qeteshpony/FP2800A-Tester ↗ |
|---|
| Kicad Ws Boards Deloop Lite MK0 Deloop_lite_mk0 Layout | 99 | 95 | 4 | 178 × 83.26 mm | MIT | hmcty/kicad-ws ↗ |
|---|
| Jupiter II Expansion II_expansion Layout | 99 | 165 | 2 | 164.47 × 71.75 mm | MIT | ricaflops/Jupiter-II-Expansion ↗ |
|---|
| CycloneIV_dev_board Ep4ce10 0 Cp4ce10_0 Layout | 97 | 62 | 2 | 70 × 58 mm | MIT | balmerdx/CycloneIV_dev_board ↗ |
|---|
| TENS Transcendance KiCad Pcb Project Transcendence Layout | 97 | 155 | 2 | 166.19 × 110.4 mm | MIT | bombarie/TENS-Transcendance ↗ |
|---|
| Hexy Layout | 97 | 120 | 2 | 69.28 × 80 mm | MIT | sqfmi/hexy ↗ |
|---|
| 74hc595 Breakout 74HC595 Breakout Layout | 96 | 143 | 2 | 114 × 53 mm | CC-BY-4.0 | sourcebox/74hc595-breakout ↗ |
|---|
| Kbpcb Fixtures GutKB Layout | 96 | 100 | 2 | 286.75 × 59.5 mm | MIT | fcoury/kbpcb ↗ |
|---|
| Research Papilio_pro_plus Papilio_pro_MKIV Layout | 96 | 177 | 4 | 68.58 × 85.09 mm | CC0-1.0 | ELEC-Research/papilio_pro_plus ↗ |
|---|
| 74hc165 Breakout 74HC165 Breakout Layout | 95 | 86 | 2 | 114 × 53 mm | CC-BY-4.0 | sourcebox/74hc165-breakout ↗ |
|---|
| KP08Hub | 94 | 98 | 2 | 82.55 × 66.04 mm | MIT | siderakb/keypad ↗ |
|---|
| Quadcopter Hw Layout | 94 | 90 | 4 | 36.5 × 36.5 mm | CERN-OHL-P-2.0 | MaroMetelski/quadcopter-hw ↗ |
|---|
| W KiCadFiles Tests Fixtures Pcb StickHub_new Layout | 94 | 47 | 2 | 16.5 × 40 mm | MIT | Steffen-W/KiCadFiles ↗ |
|---|
| TGT_kicad_data GPIO基板 Layout | 93 | 83 | 2 | 75 × 50 mm | MIT | sabanekko3/TGT_kicad_data ↗ |
|---|
| ArduPLC V1 ARDUINO_PLC Layout | 92 | 116 | 2 | 101.6 × 101.6 mm | CC0-1.0 | Reiken3099/ArduPLC ↗ |
|---|
| DESIGNS STM32 MAIN BOARD Layout | 92 | 147 | 4 | 71 × 67 mm | MIT | AutoCuro/AutoCuro ↗ |
|---|
| DuplexPCB EXAMPLE2 PowerPCB Layout | 90 | 37 | 4 | 85.95 × 20 mm | BSD-3-Clause | Polarisru/DuplexPCB ↗ |
|---|
| Mini 4ch Mixer Rev MiniStereoMixer Layout | 90 | 47 | 2 | 72.96 × 53 mm | CC-BY-4.0 | ArrestedLightning/mini-4ch-mixer ↗ |
|---|
| Kicad_led_business_card Led_business_card Layout | 89 | 47 | 2 | 88.9 × 50.8 mm | MIT | chrismars91/kicad_led_business_card ↗ |
|---|
| WinchesterPCB Winchester Layout | 89 | 117 | 2 | 135.05 × 85.84 mm | MIT | yoonjustin/WinchesterPCB ↗ |
|---|
| Bots Teensy 3.2 Clone.kicad T32_ref Layout | 89 | 73 | 4 | 71.12 × 25.4 mm | MIT | sci-bots/teensy-3.2-clone.kicad ↗ |
|---|
| Trellis Core | 89 | 126 | 4 | 50 × 50 mm | CERN-OHL-P-2.0 | protolux-electronics/trellis_core ↗ |
|---|
| Elec Esp Devboard Hardware Kicad ESP32PRJ Layout | 88 | 76 | 4 | 79.75 × 55.25 mm | MIT | Prateek-elec/esp-devboard-prateek ↗ |
|---|
| Qeteshs AC-Controller | 88 | 66 | 2 | 66 × 67 mm | BSD-2-Clause | Qeteshpony/AC-Controller ↗ |
|---|
| KiCad 204 MD204 Layout | 87 | 68 | 4 | 94.83 × 89.87 mm | MIT | CNHsu/KiCad ↗ |
|---|
| Minimee Electronics Spaceduino Layout | 87 | 94 | 2 | 69 × 69 mm | MIT | UWCubeSat/minimee-electronics ↗ |
|---|
| Driverboard | 87 | 40 | 2 | 45.21 × 45.72 mm | MIT | umcu7tcoillab/Driverboard ↗ |
|---|
| GuitarPedalPCBs TS Rat Combo 1590bb Jack_pedal Layout | 86 | 51 | 2 | 110 × 48 mm | MIT | GuitarML/GuitarPedalPCBs ↗ |
|---|
| Motor driver with stall protection | 85 | 30 | 2 | 56 × 54 mm | CERN-OHL-P-2.0 | anthony-bernaert/stall-detect-motor-driver ↗ |
|---|
| RTB D15 Decoder | 83 | 52 | 4 | 76.01 × 10.99 mm | Apache-2.0 | git4dcc/RTB_D15 ↗ |
|---|
| LED Command Center LED Dimmer Layout | 82 | 61 | 2 | 118.11 × 74.93 mm | BSD-3-Clause | settinger/LED-command-center ↗ |
|---|
| Li-Ion Battery Protector | 81 | 38 | 2 | 147.23 × 58.32 mm | MIT | cnobile2012/Li-IonBatteryProtection ↗ |
|---|
| Nsumo_hardware Nsumo Layout | 81 | 57 | 2 | 50 × 65 mm | MIT | artfulbytes/nsumo_hardware ↗ |
|---|
| KiCad Scripted StudioClock Layout | 80 | 27 | 2 | 100 × 100 mm | CC0-1.0 | jonolt/KiCad-Scripted-StudioClock ↗ |
|---|
| ArduinoLearningKitStarter | 80 | 83 | 2 | 83 × 58.5 mm | MIT | yaqwsx/PcbDraw ↗ |
|---|
| TinyRotaryPCB Kicad Panel TinyRotaryPCB_panel Layout | 80 | 20 | 2 | 52 × 44 mm | MIT | Mick3DIY/TinyRotaryPCB ↗ |
|---|
| Muliband HF Low Pass Filter | 79 | 40 | 2 | 50.8 × 34.93 mm | MIT | zleffke/kicad_filters ↗ |
|---|
| Kicadts Tests Assets CM5IO Layout | 79 | 210 | 4 | 160 × 90 mm | MIT | tscircuit/kicadts ↗ |
|---|
| UProgrammer Hardware Programmer Layout | 78 | 65 | 2 | 76.2 × 50.8 mm | MIT | MackPI/UProgrammer-Hardware ↗ |
|---|
| Split Second | 77 | 32 | 2 | 50 × 100 mm | MIT | hotkeysoft/ledMatrixGame-kicad ↗ |
|---|
| Digital_load Rounded Layout | 77 | 76 | 4 | 50 × 50 mm | Apache-2.0 | flabou/digital_load ↗ |
|---|
| TGT_kicad_data ロボマス制御 Layout | 77 | 93 | 2 | 75 × 50 mm | MIT | sabanekko3/TGT_kicad_data ↗ |
|---|
| ESP32C6_Board Layout | 76 | 71 | 4 | 100 × 50 mm | MIT | phancak/ESP32C6_Board ↗ |
|---|
| Custom Split Keyboard Right Layout | 76 | 55 | 2 | 173.83 × 173.83 mm | MIT | TheBlckbird/custom-split-keyboard ↗ |
|---|
| TGT_kicad_data よしはる Layout | 76 | 166 | 2 | 75 × 50 mm | MIT | sabanekko3/TGT_kicad_data ↗ |
|---|
| Miniboard | 75 | 50 | 4 | 50 × 18 mm | MIT | siderakb/miniboard ↗ |
|---|
| RP2040 Kb Starter PCB Layout | 75 | 79 | 2 | 99.34 × 103.58 mm | MIT | plushugh/rp2040-kb-starter ↗ |
|---|
| (title) | 74 | 56 | 2 | 40.3 × 108.18 mm | MIT | spielhuus/sconstool-kicad ↗ |
|---|
| Miniboard | 74 | 49 | 2 | 51 × 21.5 mm | MIT | siderakb/miniboard ↗ |
|---|
| Fish Isolated Power Supply And LDO Verification Isolated Power Supply and LDO Verification Layout | 73 | 33 | 4 | 84 × 82 mm | MIT | Floyd-Fish/Isolated-Power-Supply-and-LDO-Verification ↗ |
|---|
| NFC-Badge Scanner | 72 | 55 | 2 | 73 × 52 mm | BSD-2-Clause | Qeteshpony/Badge-Scanner ↗ |
|---|
| Supernight 2 | 72 | 60 | 4 | 87.25 × 45.4 mm | MIT | sneecat/supernight ↗ |
|---|
| Kicaddemo Demodiy Layout | 71 | 74 | 2 | 90 × 40 mm | MIT | xtoolbox/kicaddemo ↗ |
|---|
| Robot Layout | 71 | 118 | 2 | 63 × 89.5 mm | MIT | sidstuff/robot ↗ |
|---|
| Battery_monitor Hardware Battery Can Monitor Battery_can_monitor Layout | 71 | 58 | 2 | 82 × 102 mm | BSD-2-Clause | mbouyer/battery_monitor ↗ |
|---|
| Palac Layout | 71 | 52 | 2 | 139.58 × 113.32 mm | MIT | isavcic/palac ↗ |
|---|
| ev-charger-met16 | 70 | 61 | 2 | 165 × 70 mm | MIT | ms270169/kicad ↗ |
|---|
| MatrixClock KiCad Layout | 70 | 26 | 2 | 160 × 32 mm | MIT | middelink/MatrixClock ↗ |
|---|
| Cox KLON Layout | 69 | 47 | 2 | 94.49 × 63.5 mm | MIT | grant-cox/KLON ↗ |
|---|
| left | 69 | 53 | 2 | 115.75 × 104 mm | MIT | christianselig/caldera-keyboard ↗ |
|---|
| Universal Board for Nucleo | 68 | 79 | 2 | 70 × 57.54 mm | CC0-1.0 | noritsuna/UniversalBoard4Nucleo ↗ |
|---|
| LED Decoration | 68 | 4 | 4 | 20 × 40 mm | MIT | gregdavill/xmas-led ↗ |
|---|
| power-board-f1tenth | 68 | 38 | 2 | 57.02 × 77.5 mm | MIT | AntoninPvr/F1Tenth_powerboard ↗ |
|---|
| Five By Six Pcb Five_by_six Layout | 67 | 48 | 2 | 156.1 × 98.2 mm | MIT | maciejmatczak/five-by-six ↗ |
|---|
| BF-017 | 67 | 34 | 2 | 73.66 × 48.26 mm | CC0-1.0 | botanicfields/BF-017 ↗ |
|---|
| ESP8266 Addressable Led Strip Controller Fabrication Penelize Esp Layout | 67 | 56 | 2 | 85 × 89 mm | MIT | etronicskh/esp8266-addressable-led-strip-controller ↗ |
|---|
| Custom Split Keyboard Left Layout | 67 | 77 | 2 | 173.83 × 173.83 mm | MIT | TheBlckbird/custom-split-keyboard ↗ |
|---|
| climatedisplay | 66 | 100 | 2 | 100 × 100 mm | BSD-2-Clause | Qeteshpony/climatedisplay ↗ |
|---|
| Bluetooth_Speaker_PCB Hardware Bluetooth_spekare Layout | 66 | 69 | 2 | 198.2 × 66.22 mm | MIT | jabolos10/Bluetooth_Speaker_PCB ↗ |
|---|
| MultiProgrammer Kicad Multi_Programmer Layout | 66 | 113 | 2 | 99.06 × 96.52 mm | MIT | hotkeysoft/multiProgrammer-kicad ↗ |
|---|
| Msl Cable Tester Hardware CARTE2 Layout | 66 | 53 | 2 | 136.25 × 88.25 mm | MIT | Honzaaa45/msl-cable-tester ↗ |
|---|
| Capacitor_leakage_tester Kicad Leakage_tester Layout | 65 | 53 | 2 | 100 × 67.5 mm | MIT | Fyfar/capacitor_leakage_tester ↗ |
|---|
| ZX_Spectrum_diy Kicad5 Z2 Io Z2_io Layout | 65 | 92 | 2 | 104.77 × 100.97 mm | MIT | krzys9876/ZX_Spectrum_diy ↗ |
|---|
| SMART THERMOSTAT | 64 | 58 | 2 | 120 × 70 mm | MIT | leo-recover/domotics ↗ |
|---|
| Load Cell Occupancy Sensor | 64 | 98 | 2 | 80 × 50 mm | MIT | newAM/LoadCellOccupany ↗ |
|---|
| RasPiPico2Effector_Board Effector Layout | 64 | 64 | 2 | 60 × 90 mm | MIT | tori128/RasPiPico2Effector_Board ↗ |
|---|
| USB C FUSB302 PI Layout | 64 | 65 | 4 | 66.75 × 22 mm | MIT | bentwire/USB-C-FUSB302-PI ↗ |
|---|
| 0 TUe CBL Circular Electronics Src ESP32 Modular Board Layout | 64 | 58 | 4 | 45.3 × 40.08 mm | CERN-OHL-P-2.0 | bgb-0/TUe-CBL-Circular-Electronics ↗ |
|---|
| MCCB | 64 | 69 | 2 | 130.25 × 102.5 mm | Apache-2.0 | rick0x00/MCCB ↗ |
|---|
| OpenROAD Project Attic KicadParser Cases BM1 Bm1.routed Layout | 64 | 99 | 2 | 101.6 × 53.34 mm | BSD-3-Clause | The-OpenROAD-Project-Attic/KicadParser ↗ |
|---|
| Vacuum Tweezers ECAD Vacuum_Tweezers Layout | 64 | 87 | 4 | 41.15 × 53.04 mm | MIT | Legohead259/Vacuum-Tweezers-ECAD ↗ |
|---|
| TGT_kicad_data ミニドライバ Layout | 64 | 6 | 2 | 35 × 64 mm | MIT | sabanekko3/TGT_kicad_data ↗ |
|---|
| df-pill | 63 | 71 | 2 | 30 × 68.5 mm | Unlicense | epchain/df-pill ↗ |
|---|
| MultiCalEye | 63 | 50 | 4 | 38.5 × 39.63 mm | MIT | slimcdk/multical-eye ↗ |
|---|
| ESP32 4 Channel Relays | 63 | 90 | 2 | 83.49 × 83.69 mm | CERN-OHL-P-2.0 | leomanangka/esp32-4-channel-relays ↗ |
|---|
| OpenROAD Project Attic KicadParser Cases BM4 Bm4.routed Layout | 63 | 134 | 2 | 89 × 58 mm | BSD-3-Clause | The-OpenROAD-Project-Attic/KicadParser ↗ |
|---|
| Bluetooth Wall Player Hardware Pcb Bt_audio_rec Layout | 63 | 103 | 2 | 54 × 81.97 mm | MIT | canardos/bluetooth-wall-player ↗ |
|---|
| Raccoon Board Layout | 62 | 84 | 2 | 60 × 90 mm | MIT | mickabrig7/raccoon ↗ |
|---|
| NuDAC Kicad Layout | 62 | 63 | 4 | 63.5 × 22.86 mm | MIT | danchouzhou/NuDAC ↗ |
|---|
| E Ink_Dashbord PCB Eink_dashboard Layout | 61 | 72 | 2 | 64.52 × 55.37 mm | MIT | mlisak/E-Ink_Dashbord ↗ |
|---|
| Minimee Electronics Containment Simple Layout | 61 | 42 | 2 | 22.86 × 0 mm | MIT | UWCubeSat/minimee-electronics ↗ |
|---|
| Z280 S100 Layout | 61 | 277 | 4 | 254 × 134.62 mm | CERN-OHL-P-2.0 | cm68/Z280-S100 ↗ |
|---|
| PiDriver | 60 | 54 | 4 | 65 × 56 mm | BSD-3-Clause | AlpineOT/PiDriver ↗ |
|---|
| CocktailMachine PCB Files Cocktail PCB Layout | 60 | 67 | 2 | 102.62 × 109.98 mm | MIT | robustRobot23/CocktailMachine ↗ |
|---|
| RTB D98 NEM651 Decoder | 60 | 50 | 4 | 12.66 × 8.75 mm | Apache-2.0 | git4dcc/RTB_D98 ↗ |
|---|
| Kicad_wspr Wspr Tx M0 V1 Rev Wspr_tx_m0_v1 Layout | 60 | 74 | 2 | 50.8 × 30.48 mm | MIT | zleffke/kicad_wspr ↗ |
|---|
| BF-010 | 60 | 69 | 2 | 99.06 × 93.98 mm | CC0-1.0 | botanicfields/kicad ↗ |
|---|
| ZX_Spectrum_diy Kicad4 KEYB2 Layout | 59 | 23 | 2 | 177.16 × 103.76 mm | MIT | krzys9876/ZX_Spectrum_diy ↗ |
|---|
| ESP32 IR Receiver | 59 | 35 | 4 | 33.14 × 21.45 mm | MIT | valletw/esp-ir-receiver ↗ |
|---|
| Flipdot Controller Pcb Flipdot Controller Layout | 58 | 91 | 2 | 100 × 100 mm | BSD-2-Clause | Qeteshpony/Flipdot-Controller ↗ |
|---|
| RTB P24 Adapter Module | 58 | 50 | 2 | 79.38 × 21.59 mm | Apache-2.0 | git4dcc/RTB_P24 ↗ |
|---|
| Kicad_sequencer W6PQL Sequencer Rev W6pql_sequencer Layout | 57 | 42 | 2 | 44.45 × 31.75 mm | MIT | zleffke/kicad_sequencer ↗ |
|---|
| Audio Transceiver Hardware Kicad Tpg Transceptor Layout | 57 | 53 | 2 | 90 × 90 mm | MIT | sjperson/audio-transceiver ↗ |
|---|
| 3D Clock KiCad 3D clock Layout | 56 | 48 | 2 | 114 × 100 mm | MIT | SolidElectronics/3D-clock ↗ |
|---|
| Yet Another AVR Fusebit Rescuer | 56 | 120 | 2 | 233.68 × 81.28 mm | Apache-2.0 | atoomnetmarc/yaafr ↗ |
|---|
| STM32h743 Devboard Betaflight Hardware Ki CAD Files FC BREAKOUT Layout | 56 | 39 | 4 | 58.2 × 68.2 mm | MIT | DpooL2000/STM32h743-devboard-betaflight ↗ |
|---|
| Sensorless BLDC Electronic Speed Controller | 55 | 38 | 2 | 99.06 × 99.06 mm | MIT | phpkadir/KiCad-Sensorless-BLDC-ESC ↗ |
|---|
| QSFP Breakout | 54 | 46 | 4 | 70 × 47.5 mm | BSD-2-Clause | mwrnd/QSFP_Breakout ↗ |
|---|
| Mini Ultrasonic Kicad Layout | 54 | 47 | 2 | 26.1 × 14.95 mm | MIT | jackestar/mini-ultrasonic ↗ |
|---|
| Sumorobot Pcb Sumoboard Layout | 54 | 49 | 2 | 99.06 × 99.06 mm | MIT | robokoding/sumorobot-pcb ↗ |
|---|
| Shard Layout | 54 | 77 | 4 | 48.8 × 46.31 mm | MIT | Ender878/Shard ↗ |
|---|
| RC Helicopter Mainboard | 54 | 74 | 2 | 50 × 50 mm | CERN-OHL-P-2.0 | ikajdan/rc-helicopter-mainboard ↗ |
|---|
| STM32F4 Reference PCB STM32F4_REV2 Layout | 54 | 78 | 4 | 56 × 51 mm | MIT | pms67/STM32F4-Reference-PCB ↗ |
|---|
| Ir Led Board KiCad PCB Layout | 53 | 30 | 2 | 70.8 × 70.8 mm | MIT | brianwalczak/ir-led-board ↗ |
|---|
| (title) | 53 | 44 | 2 | 40.3 × 108.18 mm | MIT | spielhuus/sconstool-kicad ↗ |
|---|
| DSO138 Sub System Circuit Main Layout | 53 | 125 | 2 | 163.5 × 96.39 mm | MIT | minfia/dso138-sub-system ↗ |
|---|
| Protocentral_st1vafe3bx_hardware Hardware Brk_st1vafe3bx Layout | 53 | 37 | 2 | 43 × 30.5 mm | CERN-OHL-P-2.0 | Protocentral/protocentral_st1vafe3bx_hardware ↗ |
|---|
| It 3.3V 3A Step Down Converter Powered By USB C KiCad USB power port Layout | 53 | 38 | 2 | 45.9 × 21.89 mm | MIT | maudeve-it/3.3V-3A-step-down-converter-powered-by-USB-C ↗ |
|---|
| DummyLoad50V2A KICAD5 DummyLoad Layout | 53 | 32 | 2 | 50 × 75 mm | CC0-1.0 | yu2924/DummyLoad50V2A ↗ |
|---|
| 4CH-Opto-Iso | 52 | 32 | 2 | 36 × 45 mm | MIT | the78mole/kicaddev-docker ↗ |
|---|
| Waghmare MachXO2 KiCad Board MACHXO2_test Layout | 52 | 138 | 4 | 65 × 48 mm | MIT | jay-waghmare/MachXO2-KiCad-Board ↗ |
|---|
| SD2IEC | 52 | 57 | 2 | 64 × 50 mm | MIT | hotkeysoft/sd2iec-kicad ↗ |
|---|
| Kicad_projects Dimmer Trailing Edge NODEMCU01 Layout | 52 | 47 | 2 | 79.1 × 95.35 mm | CC0-1.0 | jibonaronno/kicad_projects ↗ |
|---|
| THUMBSPLIT58 Hardware Kicad Thumb Split Left Layout | 52 | 41 | 2 | 146.62 × 110.22 mm | MIT | mohammedari/thumbsplit58-hardware ↗ |
|---|
| THUMBSPLIT58 Hardware Kicad Thumb Split Right Layout | 52 | 41 | 2 | 146.62 × 110.22 mm | MIT | mohammedari/thumbsplit58-hardware ↗ |
|---|
| Rxadc_14 Layout | 51 | 51 | 4 | 32.77 × 39.12 mm | MIT | emeb/rxadc_14 ↗ |
|---|
| ESP-12-E MOD TRAFFIC MONITOR | 51 | 61 | 2 | 85 × 40 mm | CC-BY-4.0 | sigma-prj/esp-12-e-led-bar-pcb ↗ |
|---|
| Gamepad_hardware Gamepad Layout | 51 | 34 | 4 | 100 × 50 mm | Apache-2.0 | isobchuk/gamepad_hardware ↗ |
|---|
| W Kicad_file_parse Examples Test Data EXAMPLE1 Layout | 51 | 26 | 2 | 72.07 × 16.19 mm | MIT | Steffen-W/kicad_file_parse ↗ |
|---|
| Pcb Relay Board 2 Layout | 50 | 43 | 2 | 78.74 × 87.63 mm | CC0-1.0 | balazsgrill/pcb-relay-board-2 ↗ |
|---|
| Isolated Half Bridge Driver Hardware Motor driver Layout | 50 | 30 | 2 | 44.96 × 63.46 mm | MIT | DpooL2000/Isolated-Half-Bridge-Driver ↗ |
|---|
| RTB P24 Adapter Module | 50 | 46 | 2 | 79.38 × 21.59 mm | Apache-2.0 | git4dcc/RTB_P27 ↗ |
|---|
| Akashi 09 Layout | 50 | 82 | 2 | 68.58 × 53.34 mm | CC0-1.0 | suikan4github/Akashi-09 ↗ |
|---|
| Pcrap Cocoro Layout | 50 | 56 | 4 | 100 × 100 mm | BSD-3-Clause | zoftko/pcrap ↗ |
|---|
| Spin Semi FV-1 Breakout Board | 50 | 34 | 4 | 33.02 × 50.8 mm | MIT | JordanAceto/kicad_7_cli_doc_gen ↗ |
|---|