Components
481 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
RF01VM2S
Diode
250 V, 100 mA, Super Fast Recovery Diode, SOD-323
- Pins
- 2
- Pads
- 2
- SMD
- 3.2×1.9
RFX2401C
muratovas-MAS_RF
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
ESP32-WROOM-32
RF_Module
RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD
- Pins
- 39
- Pads
- 39
- SMD
- 48.0×41.3
ESP32-S3-WROOM-1
RF_Module
RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD
- Pins
- 41
- Pads
- 41
- SMD
- 48.0×41.2
ESP-12E
RF_Module
802.11 b/g/n Wi-Fi Module
- Pins
- 22
- Pads
- 22
- SMD
- 18.1×25.3
ESP32-C3-WROOM-02
RF_Module
802.11 b/g/n WiFi and Bluetooth 5 module, ESP32C3 SoC, RISCV microprocessor, On-board antenna
- Pins
- 19
- Pads
- 19
- SMD
- 28.5×25.5
nRF52840
MCU_Nordic
Multiprotocol BLE/ANT/2.4 GHz/802.15.4 Cortex-M4F SoC, AQFN-73
- Pins
- 74
- Pads
- 74
- SMD
- 9.0×9.0
ESP-12F
RF_Module
802.11 b/g/n Wi-Fi Module
- Pins
- 22
- Pads
- 22
- SMD
- 18.1×25.3
ESP32-C3
MCU_Espressif
RF Module, ESP32 SoC, RISC-V, WiFi 802.11b/n/g, Bluetooth LE 5, QFN32
- Pins
- 33
- Pads
- 33
- SMD
- 6.2×6.2
LT3042xMSE
Regulator_Linear
200mA, Adjustable, Ultralow Noise, Ultrahigh PSRR RF Linear Regulator, MSOP-10
- Pins
- 11
- Pads
- 11
- SMD
- 6.3×3.5
LFCN-2400
RF_Filter
2400MHz 50 Ohm Passive Low Pass Filter, FV1206
- Pins
- 4
- Pads
- 4
- SMD
- 4.8×3.6
LT5560
RF_Mixer
0.01MHz to 4GHz Low Power Active Mixer, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.0×3.6
ESP32-WROOM-32U
RF_Module
RF Module, ESP32-D0WD SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, external antenna, SMD
- Pins
- 39
- Pads
- 39
- SMD
- 19.5×20.2
MDBT50Q-1MV2
RF_Module
Multiprotocol BLE/ANT/2.4 GHz/802.15.4 Cortex-M4F SoC, nRF52840 module
- Pins
- 61
- Pads
- 61
- SMD
- 11.5×16.5
nRF24L01P
RF
nRF24L01+, Ultra low power 2.4GHz RF Transceiver, QFN20 4x4mm
- Pins
- 20
- Pads
- 21
- SMD
- 5.2×5.2
IRF7404
Transistor_FET
-6.7A Id, -20V Vds, P-Channel HEXFET Power MOSFET, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LMH6733
Amplifier_Operational
1.0 GHz GBW Triple Operational Amplifier, 3..12V single supply or ±1.5V...6V dual supply , SSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
ESP32-S3
espressif-Espressif
ESP32-S3 is a low-power MCU-based system-on-chip (SoC) that supports 2.4 GHz Wi-Fi and Bluetooth® Low Energy (Bluetooth LE). It consists of high-performance dual-core microprocessor (Xtensa® 32-bit LX7), a low power coprocessor, a Wi-Fi baseband, a Bluetooth LE baseband, RF module, and peripherals.
- Pins
- 57
- Pads
- 57
- SMD
- 8.3×8.3
ISO6721RFBD
Isolator
Low Power Dual-Channel 1/1 Digital Isolator, 50Mbps 11ns, Fail-Safe Low, SOIC-8 (150mil)
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
U.FL_BWIPX-1-001E
kiml-00-kiml-connector-coaxial
1 Inner needle IPEX Board Edge 6GHz 50Ω SMD RF
- Pins
- 2
- Pads
- 2
- SMD
- 4.3×5.0
NRF52840-QIAA-R
kiml-00-kiml-mcu-nordic
Multiprotocol BLE/ANT/2.4 GHz/802.15.4 Cortex-M4F SoC, AQFN-73
- Pins
- 74
- Pads
- 74
- SMD
- 9.0×9.0
ESP32-S3-WROOM-1U-N8R8
kiml-00-kiml-rf-module
2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor
- Pins
- 41
- Pads
- 41
- SMD
- 19.5×20.1
ESP32-WROOM-32E
kiml-00-kiml-rf-module
RF Module, ESP32-D0WD SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, external antenna, SMD
- Pins
- 39
- Pads
- 39
- SMD
- 48.0×41.3
ESP32-WROOM-32U-N4
kiml-00-kiml-rf-module
RF Module, ESP32-D0WD SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, external antenna, 4MB Flash, SMD
- Pins
- 39
- Pads
- 39
- SMD
- 19.5×20.2