Components
91 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
CH340C
Interface_USB
USB serial converter, crystal-less, UART, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
CH340E
Interface_USB
USB serial converter, UART, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
CH224K
Interface_USB
100W USB Type-C PD3.0/2.0, BC1.2 Sink Controller, SSOP-10
- Pins
- 11
- Pads
- 11
- SMD
- 7.5×5.4
CH340G
Interface_USB
USB serial converter, UART, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
CH330N
Interface_USB
USB serial converter, UART, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
CH334R
Interface_USB
USB HUB controller, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
CH340N
Interface_USB
USB serial converter, 2Mbps, UART, JEITA SOIC-8 (SOP-8)
- Pins
- 8
- Pads
- 8
- SMD
- 7.3×5.4
CH376T
Interface
File Management USB Flash Card SD Interface, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
CH221K
Interface_USB
USB-PD & Type-C & Fast Charge Power Sink Controller, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
CH334F
Interface_USB
USB HUB controller, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
CH340K
Interface_USB
USB serial converter, UART, SSOP-10
- Pins
- 11
- Pads
- 11
- SMD
- 7.5×5.4
CH340T
Interface_USB
USB serial converter, UART, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
CH340X
Interface_USB
USB serial converter, 5V-tolerant IO, UART, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
CH341A
Interface_USB
USB to UART / printer port / parallel port / 2-wire / 4-wire, SOIC-28 (SOP-28)
- Pins
- 28
- Pads
- 28
- SMD
- 11.9×18.4
CH343G
Interface_USB
High-Speed USB serial converter, up to 6Mbps, 3.3V or 5V supply, UART, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
CH344Q
Interface_USB
USB to Quad Serial Ports Chip, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
CH9102F
Interface_USB
WCH-IC, Single-Chip USB-to-UART Bridge, USB 2.0 Full-Speed, 4Mbps UART, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
CH340C
kiml-00-kiml-interface_usb
USB serial converter, UART, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
CH32V003FxPx
MCU_WCH_RiscV
CH32V003 series are industrial-grade general-purpose microcontrollers designed based on 32-bit RISC-V instruction set and architecture. It adopts QingKe V2A core, RV32EC instruction set, and supports 2 levels of interrupt nesting. The series are mounted with rich peripheral interfaces and function modules. Its internal organizational structure meets the low-cost and low-power embedded application scenarios.
- Pins
- 20
- Pads
- 20
- SMD
- 7.7×7.0
CH32V003JxMx
MCU_WCH_RiscV
CH32V003 series are industrial-grade general-purpose microcontrollers designed based on 32-bit RISC-V instruction set and architecture. It adopts QingKe V2A core, RV32EC instruction set, and supports 2 levels of interrupt nesting. The series are mounted with rich peripheral interfaces and function modules. Its internal organizational structure meets the low-cost and low-power embedded application scenarios. JEITA SOIC-8 (SOP-8)
- Pins
- 8
- Pads
- 8
- SMD
- 7.3×5.4
CH32V005D6U6
MCU_WCH_RiscV
QingKe 32-bit RISC-V core, 48MHz, 32KB Flash, 6KB RAM, 11 GPIO, UQFN-12
- Pins
- 13
- Pads
- 13
- SMD
- 3.3×3.3
CH32V203CxTx
MCU_WCH_RiscV
The CH32V203 is an industrial-grade enhanced low-power general-purpose MCU based on 32-bit RISC-V core.
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
CH32V203F6P6
MCU_WCH_RiscV
The CH32V203 is an industrial-grade enhanced low-power general-purpose MCU based on 32-bit RISC-V core.
- Pins
- 20
- Pads
- 20
- SMD
- 7.7×7.0
CH32V30xCxTx
MCU_WCH_RiscV
The CH32V303/5/7 is an connectivity MCUs based on 32-bit RISC-V core.
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3