2,420 matching

Analog_Switch

ESD-Protected, Low Capacitance, 2-Channel, 2:1 Switch, With Powered-off Protection, UQFN-10

Pins

10

Pads

10

SMD

2.6×3.0

Analog_Switch

Dual SPDT 0.3Ω Bidirectional Analog Switch, VSON-10

Pins

11

Pads

11

SMD

4.3×4.3

Analog_Switch

Single SPDT Analog Switch, 1.65-V to 5.5-V Single-Supply Operation, 1Ohm Ron, SOT-23-6

Pins

6

Pads

6

SMD

4.1×3.4

Analog_Switch

Single SPST Analog Switch, 5-V/3.3-V, normally OFF, 0.9Ohm Ron, SOT-23-5

Pins

5

Pads

5

SMD

4.1×3.4

Analog_Switch

Single SPST Analog Switch, 5-V/3.3-V, normally OFF, 0.9Ohm Ron, SC-70

Pins

5

Pads

5

SMD

2.9×2.2

Audio

32-bit 8-Channel Audio DAC, 135 / 129 dB DNR (mono / 8-Channel), S/PDIF / PCM (I2S and left/right-justified formats) / DoP / DSD audio input, GPIO / I2C control interface, TQFP-64

Pins

65

Pads

65

SMD

13.5×13.5

Audio

Two-Channel, Asynchronous Sample Rate Converter with Integrated Digital Audio Interface Receiver and Transmitter, TQFP-48

Pins

48

Pads

48

SMD

10.3×10.3

Audio

Stero Audio CODEC, 8- to 96-kHz, With Integrated Headphone Amplifier, QFN-28

Pins

29

Pads

29

SMD

6.2×6.2

Battery_Management

Synchronous switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs and power path selector, Texas R-PVQFN-N24

Pins

25

Pads

25

SMD

4.8×6.8

Battery_Management

High efficiency switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs, power path selector and standard temperature sensing, Texas R-RGE0024H

Pins

25

Pads

25

SMD

5.3×5.3

Battery_Management

High efficiency switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs, power path selector and JEITA compatible temperature sensing, Texas R-RGE0024H

Pins

25

Pads

25

SMD

5.3×5.3

Battery_Management

Standalone 2-Cell (Li-Ion / Li-Polymer), 2A Boost-Mode Battery Charger With PowerPath, USB BC1.2 Detection, USB On-The-Go Boost (OTG), 4.3..6.2V VBUS, 8.2/8.4/8.7/8.8V charge voltage, 9.2V BATOVP, 1.5MHz, VQFN-24

Pins

25

Pads

25

SMD

5.3×5.3

Battery_Management

I2C Controlled 2-Cell (Li-Ion / Li-Polymer), 2A boost-mode battery charger with cell balancing for USB input, 3.9..6.2V VBUS, 3.4..4.6V charge voltage regulation range (per cell), 1.5 MHz, VQFN-24

Pins

25

Pads

25

SMD

5.3×5.3

Battery_Management

I2C Controlled Single Cell (Li-Ion / Li-Polymer) 5A Fast Charger with MaxCharge, USB BC1.2 Detection, 3.9..14V VBUS, 3.840..4.608V charge voltage range, 1.5 MHz (buck mode) and 500 kHz /1.5 MHz (boost mode), WQFN-24

Pins

25

Pads

25

SMD

5.3×5.3

Battery_Management

System Side Li Ion/Polymer Fuel Gauge, 4.30-4.35V, PDSON-12

Pins

13

Pads

13

SMD

4.9×3.4

Battery_Management

System Side Li Ion/Polymer Fuel Gauge, 4.2V, PDSON-12

Pins

13

Pads

13

SMD

4.9×3.4

Battery_Management

System Side Li Ion/Polymer Fuel Gauge, 4.30-4.35V, PDSON-12

Pins

13

Pads

13

SMD

4.9×3.4

Battery_Management

Lithium battery fuel gauge, battery management controller for BQ769x0, TSSOP-30

Pins

30

Pads

30

SMD

7.7×8.3

Battery_Management

Charger for 2 lithium-ion (Li+), 5/6 NickelCadium (NiCD) cells or 5/6 NickelMetalHydride (NiMH), 9 to 28V VDD, -40 to +85 degree Celsius, QSOP-16

Pins

16

Pads

16

SMD

7.4×5.4

Comparator

Single 1.8V Low-Power Push-Pull Output Comparator, SOT-23-5

Pins

5

Pads

5

SMD

4.1×3.4

Comparator

Single 1.8V Low-Power Open-Drain Output Comparator, SOT-23-5

Pins

5

Pads

5

SMD

4.1×3.4

Comparator

3 μA Comparator with Integrated Reference Voltage, SOT-23-6

Pins

6

Pads

6

SMD

4.1×3.4

Connector

1 Port RJ45 Magjack Connector Through Hole 10/100/1000 Base-T, AutoMDIX

Pins

17

Pads

17

THT

34.0×19.8

Converter_ACDC

12V, 167mA, 2W, Isolated, AC-DC, IRM02

Pins

4

Pads

4

THT

34.2×22.7