Components
27 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
MAX3078E
Interface_UART
+3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LTC4316xDD
Interface_Expansion
Single I2C/SMBus Address-Translator, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.5
LTC4317
Interface_Expansion
Dual I2C/SMBus Address-Translator, DFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.0×5.6
LTC1688
Interface
100Mbps RS485 Hot Swapable Quad Drivers
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
LTC1689
Interface
100Mbps RS485 Hot Swapable Quad Drivers
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
PCA9615DP
Interface
Dual bidirectional hot-swap multipoint bus buffer, SO-8
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
MAX3072E
Interface_UART
+3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX3075E
Interface_UART
+3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADM1270ACPZ
Power_Management
High Voltage Input Protection Device
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
ADM1270ARQZ
Power_Management
High Voltage Input Protection Device
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
LM5060
Power_Management
High side protection controller, +5.5V to +65V operation, VSSOP-10 package
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LM50672NPAR
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, SOIC-14W
- Pins
- 10
- Pads
- 14
- SMD
- 11.9×9.5
LM5067MM-1
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
LM5067MM-2
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
LM5067MMX-2
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
LM5067MWX-1
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, SOIC-14W
- Pins
- 10
- Pads
- 14
- SMD
- 11.9×9.5
LM5069MM-1
Power_Management
Hot swap & Inrush current controller with power limiting, latch off on fault, 9V to 80Vin, UVLO & OVLO, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LM5069MM-2
Power_Management
Hot swap & Inrush current controller with power limiting, auto retry on fault, 9V to 80Vin, UVLO & OVLO, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LT1641-1
Power_Management
High voltage hot swap controller, +9V to +80V, with latching feature, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LT1641-2
Power_Management
High voltage hot swap controller, +9V to +80V operation, with auto-retry feature
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LTC4242xUHF
Power_Management
Dual Slot Hot Swap Controller for PCI Express, WQFN-38
- Pins
- 39
- Pads
- 39
- SMD
- 6.2×8.2
MIC2587-1
Power_Management
Positive high voltage hot swap controller +10V to +80V with latched operation
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MIC2587R-1
Power_Management
Positive high voltage hot swap controller +10V to +80V with auto-retry operation
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
HV100K5-G
Regulator_Current
Hot-Swap Current Limiter Controller, SOT223
- Pins
- 3
- Pads
- 3
- SMD
- 8.8×7.2