Components

48 matching

Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.

Exact SemanticRanked by meaning — describe the part you need

48 components

no footprint

BTM112

SYM——

RF_Bluetooth

Bluetooth SPP Module, UART, Class 2

Pins: 34
Pads: —
Mount: —

no footprint

MMC2114CFCPU

SYM——

MCU_NXP_MCore

Motorola M*CORE upro 100 pins

Pins: 99
Pads: —
Mount: —

no footprint

BTM222

SYM——

RF_Bluetooth

Bluetooth SPP Module, UART, Class 1

Pins: 38
Pads: —
Mount: —

no footprint

4160

SYM——

4xxx_IEEE

Pins: 16
Pads: —
Mount: —

no footprint

Bus_M.2_Socket_E

SYM——

Connector

M.2 Socket 1-SD Mechanical Key E

Pins: 67
Pads: —
Mount: —

no footprint

CP

SYM——

agg-cp

Pins: 2
Pads: —
Mount: —

no footprint

DSPIC33FJ64GP804

SYM——

DSP_Microchip_DSPIC33

40MIPS, 64k Flash, 16k SRAM, ECAN, Audio DAC

Pins: 44
Pads: —
Mount: —

no footprint

AP6256

SYM——

muratovas-MAS_IC_MCU

WiFi Modul, 1Tx/1Rx 802.11 ac/a/b/g/n Wi-Fi + BT 5.2 Module , SDIO V3.0/2.0, UART/PCM

Pins: 47
Pads: —
Mount: —

no footprint

Mousebites, Mechanical, 3mm

SYM——

jlcpcb-JLCPCB-Manufacturing

Breakaway Mousebites based on Sparkfun's recomended parameters tweaked for PCM_JLCPCB

Pins: —
Pads: —
Mount: —

no footprint

4163

SYM——

4xxx_IEEE

Pins: 16
Pads: —
Mount: —

no footprint

DSPIC33FJ128GP804

SYM——

DSP_Microchip_DSPIC33

40MIPS, 128k Flash, 16k SRAM, ECAN, Audio DAC

Pins: 44
Pads: —
Mount: —

no footprint

Mousebites, Cosmetic, 3mm

SYM——

jlcpcb-JLCPCB-Manufacturing

Breakaway Mousebites based on Sparkfun's recomended parameters tweaked for PCM_JLCPCB

Pins: —
Pads: —
Mount: —

no footprint

4162

SYM——

4xxx_IEEE

Pins: 16
Pads: —
Mount: —

no footprint

Part Number, PCM_JLCPCB, 0.8x0.15mm

SYM——

jlcpcb-JLCPCB-Manufacturing

To indicate the location, simply add the text "JLCJLCJLCJLC" to the silk layer and select the "Specify a location" option when placing your order. Please note that if this option is not chosen, we may not notice that you have added the text. Note: Use only "JLCJLCJLCJLC" without any additional characters. The font size should be larger than 0.8mm in height and 0.15mm in width.

Pins: —
Pads: —
Mount: —

no footprint

Raspberry_Pi_4

SYM——

Connector

Raspberry Pi 4 Model B

Pins: 40
Pads: —
Mount: —

no footprint

40160

SYM——

4xxx_IEEE

Pins: 16
Pads: —
Mount: —

no footprint

4520

SYM——

4xxx_IEEE

Pins: 16
Pads: —
Mount: —

no footprint

Tooling Hole, PCM_JLCPCB, 1.152mm

SYM——

jlcpcb-JLCPCB-Manufacturing

1. Two or three tooling holes should be added on the PCB, they should be placed in opposite corners of the PCB and as far apart from one another as practical. 2. Tooling holes should be 1.152mm(45.4mil) round non-plated holes with 0.148mm solder mask expansion. 3. Tooling holes are only required for PCB assembly orders. 4. Please try to add tooling holes on empty space and keep them away from traces. If there is no enough room, you can add them to the copper area.

Pins: —
Pads: —
Mount: —