Components
28 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
STP08CP05XT
Driver_LED
8-bit constant current LED sink driver, 5..100mA output current, 20V driving capability, 3.0..5.5V power supply, HTSSOP-16
- Pins
- 17
- Pads
- 17
- SMD
- 7.8×5.5
STP16CP05XT
Driver_LED
16-bit constant current LED sink driver, 5..100mA output current, 20V driving capability, 3.0..5.5V power supply, HTSSOP-24
- Pins
- 25
- Pads
- 25
- SMD
- 7.8×8.3
SST39LF010-70-4x-NH
gekkio-Gekkio_Memory_Flash
1 Mbit (128k x 8) 3.0-3.6V Multi-Purpose Flash, 70 ns, PLCC-32
- Pins
- 32
- Pads
- 32
- SMD
- 13.1×15.6
SST39LF020-70-4x-NH
gekkio-Gekkio_Memory_Flash
2 Mbit (256k x 8) 3.0-3.6V Multi-Purpose Flash, 70 ns, PLCC-32
- Pins
- 32
- Pads
- 32
- SMD
- 13.1×15.6
SST39LF040-70-4x-NH
gekkio-Gekkio_Memory_Flash
4 Mbit (512k x 8) 3.0-3.6V Multi-Purpose Flash, 70 ns, PLCC-32
- Pins
- 32
- Pads
- 32
- SMD
- 13.1×15.6
NCV8535MN300R2G
gekkio-Gekkio_Regulator_Linear
3.0V, 500mA, Voltage Regulator, Ultra High Accuracy, Low Iq, Low Dropout, Enable, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.5
ISL3282ExRHZ
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 5.5V, TDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×2.5
ISL3298xxRT
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 7V, Low-Power, TDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×2.5
HD3SS6126
Interface_USB
USB 3.0 + USB 2.0 Differential Switch 2:1/1:2 MUX/DEMUX, WQFN-42
- Pins
- 43
- Pads
- 43
- SMD
- 4.8×10.3
HUSB238_xxxDD
Interface_USB
USB-PD Sink IC Port Controller, VBUS = 3..25V, USB Type-C rev. 1.4, USB-PD rev. 3.0, BC1.2, WDFN-10 / WSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.2×3.5
MS2130
Interface_USB
USB 3.0 HD Video Capture Chip, 24 MHz external clock, VQFN-64
- Pins
- 65
- Pads
- 65
- SMD
- 10.2×10.2
TUSB7340
Interface_USB
USB 3.0 xHCI Host Controller
- Pins
- 105
- Pads
- 105
- SMD
- 9.9×9.9
UPD720202K8-7x1-BAA
Interface_USB
PCIe to USB 3.0 Host Controller, 2 ports, QFN-48
- Pins
- 49
- Pads
- 49
- SMD
- 8.2×8.2
APFA3010
LED
LED RGB, Common Anode, SMD, 3.0x1.5mm, Horizontal
- Pins
- 4
- Pads
- 4
- SMD
- 4.5×2.6
ESP32-PICO-D4
MCU_Espressif
RF Module, ESP32 SoC, 4MB In-Package flash, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.0-3.6V, external antenna, QFN-48
- Pins
- 49
- Pads
- 49
- SMD
- 8.2×8.2
ESP32-PICO-V3
MCU_Espressif
RF Module, ESP32 SoC, 4MB In-Package flash, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.0-3.6V, external antenna, QFN-48
- Pins
- 49
- Pads
- 49
- SMD
- 8.2×8.2
ESP32-PICO-V3-02
MCU_Espressif
RF Module, ESP32 SoC, 8MB In-Package flash, 2MB In-Package PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.0-3.6V, external antenna, QFN-48
- Pins
- 49
- Pads
- 49
- SMD
- 8.2×8.2
GD25QxxxEY
Memory_Flash
3.0V, Standard/Dual/Quad Serial Flash, WSON-8
- Pins
- 9
- Pads
- 9
- SMD
- 8.7×6.5
CY14V256LA-BA
Memory_NVRAM
256-Kbit (32K x 8-bit) nvSRAM, core VCC = 3.0V to 3.6V, I/O VCCQ = 1.65V to 1.95V, 35ns, TFBGA-48
- Pins
- 48
- Pads
- 48
- SMD
- 8.0×12.0
TPD1E05U06DPY
Power_Protection
1-Channel ESD Protection for Super-Speed USB 3.0 Interface, X1SON-2
- Pins
- 2
- Pads
- 2
- SMD
- 1.3×0.9
AP7370-30FDC
Regulator_Linear
350mA Low-Dropout Linear Regulator, 3.0V fixed output, DFN-6
- Pins
- 7
- Pads
- 7
- SMD
- 3.2×2.5
LDK130PU30R_DFN6
Regulator_Linear
300mA low dropout linear regulator, low quiescent current very, low noise, shutdown pin, fixed 3.0V positive output, DFN-6
- Pins
- 6
- Pads
- 6
- SMD
- 1.6×1.4
LP2951-3.0_WSON
Regulator_Linear
Micropower Voltage Regulators with Shutdown, 100mA, Fixed Output 3.0V, LDO, WSON-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×3.5
LP2987-3.0_WSON8
Regulator_Linear
200mA Linear LDO Regulator, MicroPower, Fixed Output 3.0V, WSON-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.5×4.5