Components
50 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
ADG658YCP
Analog_Switch
8-channel iCMOS analog multiplexer, 45 Ohm Ron, 210 MHz, LFCSP-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
ADG715
Analog_Switch
CMOS, Low Voltage, Serially Controlled, Octal SPST Switch, I2C interface, TSSOP-24
- Pins
- 24
- Pads
- 24
- SMD
- 7.7×8.3
ADG758CPZ
Analog_Switch
8-channel CMOS analog multiplexer, 3 Ohm Ron, 55 MHz, LFCSP-20
- Pins
- 21
- Pads
- 21
- SMD
- 5.3×5.3
FSA3157L6X
Analog_Switch
Single SPDT Low-Voltage Analog Switch or 2:1 Multiplexer/De-Multiplexer Bus Switch, 10Ohm Ron, MicroPak-6
- Pins
- 6
- Pads
- 6
- SMD
- 1.8×1.9
FSA3157P6X
Analog_Switch
Single SPDT Low-Voltage Analog Switch or 2:1 Multiplexer/De-Multiplexer Bus Switch, 10Ohm Ron, SC-70-6
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2
HEF4051BT
Analog_Switch
8-channel analog multiplexer / demultiplexer, 3.0..15.0V supply voltage, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
HEF4051BTT
Analog_Switch
8-channel analog multiplexer / demultiplexer, 3.0..15.0V supply voltage, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
HEF4052BT
Analog_Switch
Dual 4-channel analog multiplexer / demultiplexer, 3.0..15.0V supply voltage, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
HEF4052BTT
Analog_Switch
Dual 4-channel analog multiplexer / demultiplexer, 3.0..15.0V supply voltage, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
HEF4066BT
Analog_Switch
Quad single-pole single-throw analog switch, 3.0...15.0V supply, VI = 0...VDD, f(-3dB) = 90MHz, RON(peak) = 350 / 80 / 60 ohms (for VI from 0V to VDD, with VDD 5 / 10 / 15V respectively), SOIC-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2
MAX14759
Analog_Switch
Above- and Below-the-Rails Low On-Resistance Analog Switches, max 2 Ohms On-Resistance, TDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×3.5
MAX325CSA
Analog_Switch
Dual SPST CMOS Analog Switches, normally 1xOFF and 1xON, 60Ohm Ron, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX325CUA
Analog_Switch
Dual SPST CMOS Analog Switches, normally 1xOFF and 1xON, 60Ohm Ron, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
NC7SB3157L6X
Analog_Switch
Single SPDT Low-Voltage Analog Switch or 2:1 Multiplexer/De-Multiplexer Bus Switch, 10Ohm Ron, MicroPak-6
- Pins
- 6
- Pads
- 6
- SMD
- 1.8×1.9
NC7SB3157P6X
Analog_Switch
Single SPDT Low-Voltage Analog Switch or 2:1 Multiplexer/De-Multiplexer Bus Switch, 10Ohm Ron, SC-70-6
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2
NX3L4051HR
Analog_Switch
Single 8-channel analog switch, break before switch, low-ohmic 0.5 Ohm, 1.4V-4.3V , HXQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
NX3L4051PW
Analog_Switch
Single 8-channel analog switch, break before switch, low-ohmic 0.5 Ohm, 1.4V-4.3V , TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
TMUX1208PW
Analog_Switch
5V, 8:1 General Purpose Analog Multiplexer, 5 Ohm Ron, 65 Mhz, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
TMUX1208RSV
Analog_Switch
5V, 8:1 General Purpose Analog Multiplexer, 5 Ohm Ron, 65 Mhz, QFN-16
- Pins
- 16
- Pads
- 16
- SMD
- 3.0×3.8
TMUX154EDGS
Analog_Switch
ESD-Protected, Low Capacitance, 2-Channel, 2:1 Switch, With Powered-off Protection, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
TMUX154ERSW
Analog_Switch
ESD-Protected, Low Capacitance, 2-Channel, 2:1 Switch, With Powered-off Protection, UQFN-10
- Pins
- 10
- Pads
- 10
- SMD
- 2.6×3.0
TMUX1574DYY
Analog_Switch
Low Capacitance, 4-Channel, 2 to 1 Switch, Powered-off Protection with 1.8V logic, TSOT-23-16
- Pins
- 16
- Pads
- 16
- SMD
- 4.6×4.7
TMUX1574PW
Analog_Switch
Low Capacitance and low resistance 2Ω, 4-Channel, 2:1 Switch, Powered-off Protection with 1.8V logic, 1.5 - 5.5V, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
TMUX1574RSV
Analog_Switch
Low Capacitance and low resistance 2Ω, 4-Channel, 2:1 Switch, Powered-off Protection with 1.8V logic, 1.5 - 5.5V, UQFN-16
- Pins
- 16
- Pads
- 16
- SMD
- 3.0×3.8