Components
29 components matching “5”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
LTC4054ES5-4.2
Battery_Management
Constant-current/constant-voltage linear charger for single cell lithium-ion batteries with 2.9V Trickle Charge, 4.5V to 6.5V VDD, -40 to +85 degree Celsius, TSOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TP4057
Battery_Management
Constant-current/constant-voltage linear charger for single cell lithium-ion batteries with 2.9V Trickle Charge, 4.5V to 6.5V VDD, -40 to +85 degree Celsius, TSOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
BQ25895RTW
Battery_Management
I2C Controlled Single Cell (Li-Ion / Li-Polymer) 5A Fast Charger with MaxCharge, USB BC1.2 Detection, 3.9..14V VBUS, 3.840..4.608V charge voltage range, 1.5 MHz (buck mode) and 500 kHz /1.5 MHz (boost mode), WQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
ADP5091
Battery_Management
Ultralow Power Energy Harvester PMUs with MPPT and Charge Management, LFCSP-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ25173DSG
Battery_Management
800-mA Linear Charger for 1- to 4-Cell Supercapacitor, input 3 to 18v, WSON-8
- Pins
- 9
- Pads
- 9
- SMD
- 3.2×2.5
LT3652EDD
Battery_Management
Step-down battery charger for solar power, Lithium Phosphate (LiFePO4), Lead (Pb), Lithium+ (Li+) , 4.95V to 32V VDD, 2A, -40 to +125 degree Celsius, DFN-12
- Pins
- 13
- Pads
- 13
- SMD
- 4.3×3.5
LT3652EMSE
Battery_Management
Step-down battery charger for solar power, Lithium Phosphate (LiFePO4), Lead (Pb), Lithium+ (Li+) , 4.95V to 32V VDD, 2A, -40 to +125 degree Celsius, MSOP-12
- Pins
- 13
- Pads
- 13
- SMD
- 6.3×4.5
LT3652IMSE
Battery_Management
Step-down battery charger for solar power, Lithium Phosphate (LiFePO4), Lead (Pb), Lithium+ (Li+) , 4.95V to 32V VDD, 2A, -40 to +125 degree Celsius, MSOP-12
- Pins
- 13
- Pads
- 13
- SMD
- 6.3×4.5
ADP5063
Battery_Management
Linear LiFePO4 Battery Charger with Power Path and USB Compatibility, LFCSP
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
BQ25601
Battery_Management
I2C Controlled 3A Single-Cell Battery Charger for High Input Voltage and Narrow Voltage DC Power Path Management, WQFN-32
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
MCP73831-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73832-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
ADP5090ACP
Battery_Management
Ultralow Power Boost Regulator with MPPT and Charge Management, LFCSP-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
ADP5092
Battery_Management
Ultralow Power Energy Harvester PMUs with MPPT and Charge Management, LFCSP-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
AS8506C
Battery_Management
Stackable cell monitor, cell balancer, 3-7 Cells, SPI Interface
- Pins
- 41
- Pads
- 41
- SMD
- 7.2×7.2
BQ25040
Battery_Management
1.1A, single cell Li-ion battery charger with 50mA LDO, up to 30V input, WSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.3×3.5
BQ25886RGE
Battery_Management
Standalone 2-Cell (Li-Ion / Li-Polymer), 2A Boost-Mode Battery Charger With PowerPath, USB BC1.2 Detection, USB On-The-Go Boost (OTG), 4.3..6.2V VBUS, 8.2/8.4/8.7/8.8V charge voltage, 9.2V BATOVP, 1.5MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ25887RGE
Battery_Management
I2C Controlled 2-Cell (Li-Ion / Li-Polymer), 2A boost-mode battery charger with cell balancing for USB input, 3.9..6.2V VBUS, 3.4..4.6V charge voltage regulation range (per cell), 1.5 MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ27750
Battery_Management
System Side Li Ion/Polymer Fuel Gauge, VSON-12
- Pins
- 13
- Pads
- 13
- SMD
- 4.9×3.4
BQ78350DBT
Battery_Management
Lithium battery fuel gauge, battery management controller for BQ769x0, TSSOP-30
- Pins
- 30
- Pads
- 30
- SMD
- 7.7×8.3
BQ78350DBT-R1
Battery_Management
Lithium battery fuel gauge, battery management controller for BQ769x0, TSSOP-30
- Pins
- 30
- Pads
- 30
- SMD
- 7.7×8.3
DS2745U
Battery_Management
Current-flow, voltage and temperature measurement to support battery capacity monitoring, 2.5V to 4.5V VDD, -40 to +85 degree Celsius, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 5.9×3.6
LT3652IDD
Battery_Management
Step-down battery charger for solar power, Lithium Phosphate (LiFePO4), Lead (Pb), Lithium+ (Li+) , 4.95V to 32V VDD, 2A, -40 to +125 degree Celsius, DFN-12
- Pins
- 13
- Pads
- 13
- SMD
- 4.3×3.5
LTC2959
Battery_Management
Ultra-Low Power Battery Gas Gauge with Temperature, Voltage Measurement, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.1×3.6
