Components
23 components matching “voltage”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
LTC4054ES5-4.2
Battery_Management
Constant-current/constant-voltage linear charger for single cell lithium-ion batteries with 2.9V Trickle Charge, 4.5V to 6.5V VDD, -40 to +85 degree Celsius, TSOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TP4057
Battery_Management
Constant-current/constant-voltage linear charger for single cell lithium-ion batteries with 2.9V Trickle Charge, 4.5V to 6.5V VDD, -40 to +85 degree Celsius, TSOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
BQ297xy
Battery_Management
Voltage and Current Protection for Single-Cell Li-Ion and Li-Polymer Batteries
- Pins
- 6
- Pads
- 6
- SMD
- 2.4×2.0
BQ25895RTW
Battery_Management
I2C Controlled Single Cell (Li-Ion / Li-Polymer) 5A Fast Charger with MaxCharge, USB BC1.2 Detection, 3.9..14V VBUS, 3.840..4.608V charge voltage range, 1.5 MHz (buck mode) and 500 kHz /1.5 MHz (boost mode), WQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ21040DBV
Battery_Management
Single cell, 0.8A Li-Ion/Li-Po linear charge management controller, up to 30V input, 4.2V charge voltage, Open-Drain Status Output, Temperature sense input, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
BQ25601
Battery_Management
I2C Controlled 3A Single-Cell Battery Charger for High Input Voltage and Narrow Voltage DC Power Path Management, WQFN-32
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ76200PW
Battery_Management
High Voltage Battery Pack Front-End Charge/Discharge High-Side NFET Driver, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
BQ25886RGE
Battery_Management
Standalone 2-Cell (Li-Ion / Li-Polymer), 2A Boost-Mode Battery Charger With PowerPath, USB BC1.2 Detection, USB On-The-Go Boost (OTG), 4.3..6.2V VBUS, 8.2/8.4/8.7/8.8V charge voltage, 9.2V BATOVP, 1.5MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ25887RGE
Battery_Management
I2C Controlled 2-Cell (Li-Ion / Li-Polymer), 2A boost-mode battery charger with cell balancing for USB input, 3.9..6.2V VBUS, 3.4..4.6V charge voltage regulation range (per cell), 1.5 MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
DS2745U
Battery_Management
Current-flow, voltage and temperature measurement to support battery capacity monitoring, 2.5V to 4.5V VDD, -40 to +85 degree Celsius, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 5.9×3.6
LTC2959
Battery_Management
Ultra-Low Power Battery Gas Gauge with Temperature, Voltage Measurement, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.1×3.6
LTC4054XES5-4.2
Battery_Management
Constant-current/constant-voltage linear charger for single cell lithium-ion batteries no Trickle Charge, 4.5V to 6.5V VDD, -40 to +85 degree Celsius, TSOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
LTC4055
Battery_Management
USB Power Controller and Li-Ion Charger (4.2V Float Voltage)
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
LTC4055-1
Battery_Management
USB Power Controller and Li-Ion Charger (4.1V Float Voltage)
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
MC34673
Battery_Management
High Input Voltage 1.2A Charger for Single-cell Li-Ion Batteries, UDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.2×2.6
TP4056-42-ESOP8
Battery_Management
1A Standalone Linear Li-ion/LiPo single-cell battery charger, 4.2V ±1% charge voltage, VCC = 4.0..8.0V, SOIC-8 (SOP-8)
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4
LTC2942
Battery_Management
Battery Gas Gauge with Temperature, Voltage Measurement, DFN-6
- Pins
- 6
- Pads
- 7
- SMD
- 4.2×2.5
BQ24610
Battery_Management
10A, 28V max voltage, Li-Ion Charger w/600kHz NMOS-NMOS Synchronous Buck Converter, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ24617
Battery_Management
10A, 24V max voltage, Li-Ion Charger w/600kHz NMOS-NMOS Synchronous Buck Converter, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ24650
Battery_Management
10A, 28V max voltage, Battery Charger w/600kHz NMOS-NMOS Synchronous Buck Converter for Solar, VQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.8×4.8
BQ25798
Battery_Management
I2C controlled, 5A Buck-Boost battery charger (1-4 cell, Li-Ion / Li-Polymer), USB BC1.2 / HVDCP detection, 3.6..24V VBUS, 3..18.8V charge voltage regulation, 0.75..1.5 MHz, VQFN-29 (Texas RQM0029A)
- Pins
- 29
- Pads
- 29
- SMD
- 4.9×4.9
CN3063
Battery_Management
Constant-current/constant voltage linear charger for single cell Li-ion and Li Polymer batteries ideally suited for solar powered systems, 0.6A, SOIC-8-1EP
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4
CN3163
Battery_Management
Constant-current/constant voltage linear charger for single cell Li-ion and Li Polymer batteries ideally suited for solar powered systems, 1A, SOIC-8-1EP
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4