Components
48 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
ADM205
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 5 drivers and 5 receivers (tx/rx: 5/5), shutdown / enable pins, DIP-24 (600 mil)
- Pins
- 24
- Pads
- 24
- THT
- 17.3×31.0
ISL3280ExHZ
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 5.5V, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
ADM222
Interface_UART
Dual RS232 driver/receiver, 5V supply, 200kb/s
- Pins
- 18
- Pads
- —
- Mount
- —
ADM213
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 5 receivers (tx/rx: 4/5; 2 receivers active in shutdown), shutdown / enable pins, SOIC-28 / SSOP-28
- Pins
- 28
- Pads
- —
- Mount
- —
THVD1500
Interface_UART
Half duplex RS-485, 500 Kbps, 4.5V - 5.5V supply, ±8kV electro-static discharge (ESD) protection, with receiver/driver enable, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADM232A
Interface_UART
Dual RS232 driver/receiver, 5V supply, 200kb/s
- Pins
- 16
- Pads
- —
- Mount
- —
MAX1487E
Interface_UART
Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, no low-power shutdown, with receiver/driver enable, 128 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADM209
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 3 drivers and 5 receivers (tx/rx: 3/5), enable pin, external 9 V to 13.2 V supply, DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
LTC2857xDD-2
Interface_UART
RS-485, RS-422 Full duplex 250kbps transceiver, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.0×3.6
ADM207
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 5 drivers and 3 receivers (tx/rx: 5/3), DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
ADM208
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 4 receivers (tx/rx: 4/4), DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
MAX485E
Interface_UART
Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LTC2856xDD-2
Interface_UART
RS-485, RS-422 Half duplex 250kbps transceiver, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.0×3.6
THVD1420D
Interface_UART
Half duplex RS-485/RS-422, 12 Mbps, 3V - 5.5V supply, ±12kV electro-static discharge (ESD) protection, with receiver/driver enable, 32 receiver drive capacity, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX481E
Interface_UART
Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, with low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX491E
Interface_UART
Full duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate limited, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, 0 to +70 degree Celsius, DIP-14 and SOIC-14
- Pins
- 14
- Pads
- —
- Mount
- —
MAX3218
Interface_UART
Dual RS-232 Transceiver, 1.8V to 4.25V, AutoShutdown, DIP-20/SSOP-20
- Pins
- 20
- Pads
- —
- Mount
- —
THVD1400D
Interface_UART
Half duplex RS-485/RS-422, 500 Kbps, 3V - 5.5V supply, ±12kV electro-static discharge (ESD) protection, with receiver/driver enable, 32 receiver drive capacity, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADM211
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 5 receivers (tx/rx: 4/5), shutdown / enable pins, SOIC-28 / SSOP-28
- Pins
- 28
- Pads
- —
- Mount
- —
AZ75232GS
Interface_UART
RS232 interface IC, 3 drivers, 5 receivers, 3.3V/5V Vcc supply, bipolar Vdd/Vss supply, 120kb/s, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
MAX3226
Interface_UART
Single RS232 driver/receiver, 3.0V to 5V supply, 250kb/s, AutoShutdown Plus, SSOP-16 package
- Pins
- 16
- Pads
- 16
- SMD
- 9.1×6.7
ST485E
Interface_UART
Half duplex RS-485/RS-422, 5 Mbps, ±15kV ESD, 5V supply, 256 bus load, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX490E
Interface_UART
Full duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate limited, no low-power shutdown, no with receiver/driver enable, 32 receiver drive capability, -40 to +85 degree Celsius, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ST202ExD
Interface_UART
+/-15 kV ESD-protected 5V powered RS-232 dual transceiver (tx/rx: 2/2), 230kbps, 0.1uF capacitors operation, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
LT1785AxN8
Interface_UART
RS-485, RS-422 Half duplex 250kbps transceiver, fail-safe receiver, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
LT1785AxS8
Interface_UART
RS-485, RS-422 Half duplex 250kbps transceiver, fail-safe receiver, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ST232ExD
Interface_UART
+/-15 kV ESD-protected 5V powered RS-232 dual transceiver (tx/rx: 2/2), 230kbps, 1uF capacitors operation, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
SP3485CP
Interface_UART
3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, DIP8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
MAX202
Interface_UART
Dual RS232 driver/receiver, 5V supply, 120kb/s, 0C-70C
- Pins
- 16
- Pads
- —
- Mount
- —
LTC2861
Interface_UART
20Mbps RS485 transceiver with tntegrated switchable termination
- Pins
- 12
- Pads
- 28
- SMD
- 9.4×10.7
AZ75232M
Interface_UART
RS232 interface IC, 3 drivers, 5 receivers, 3.3V/5V Vcc supply, bipolar Vdd/Vss supply, 120kb/s, SOIC-20
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
MAX3232
Interface_UART
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1μF External Capacitors
- Pins
- 16
- Pads
- —
- Mount
- —
MC68A50
Interface_UART
Asynchronous Communications Interface Adapter 1.5MHz, DIP-40
- Pins
- 24
- Pads
- 24
- THT
- 17.3×31.0
AZ75232G
Interface_UART
RS232 interface IC, 3 drivers, 5 receivers, 3.3V/5V Vcc supply, bipolar Vdd/Vss supply, 120kb/s, TSSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 7.7×7.0
ICL3232
Interface_UART
3.0V to 5.5V, Low-Power, up to 250kbps, True RS-232 Transceivers Using Four 0.1μF External Capacitors
- Pins
- 16
- Pads
- —
- Mount
- —
MAX3227
Interface_UART
Single RS232 driver/receiver, 3.0V to 5V supply, 1Mb/s, AutoShutdown Plus, SSOP-16 package
- Pins
- 16
- Pads
- 16
- SMD
- 9.1×6.7
SN65LBC176P
Interface_UART
Differential bus transceiver, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
MAX232
Interface_UART
Dual RS232 driver/receiver, 5V supply, 120kb/s, 0C-70C
- Pins
- 16
- Pads
- —
- Mount
- —
ISL3283ExHZ
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 5.5V, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
ISL3284ExHZ
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 5.5V, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
LT1785xN8
Interface_UART
RS-485, RS-422 Half duplex 250kbps transceiver, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
SN75LBC176P
Interface_UART
Differential bus transceiver, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
ISO3082DW
Interface_UART
200 kbps, Isolated 5-V Half-Duplex RS-485 transceiver, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
MAX3486
Interface_UART
True RS-485/RS-422, 2.5Mbps, Slew-Rate Limited, with low-power shutdown, with receiver/driver enable, 32 receiver drive capacitity, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SP3481CP
Interface_UART
3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, DIP8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
LTC2856xMS8-2
Interface_UART
RS-485, RS-422 Half duplex 250kbps transceiver, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
SNJ55LBC176JG
Interface_UART
Differential bus transceiver, ceramic DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
THVD1450DR
Interface_UART
3.3-V to 5-V RS-485 transceiver with ±18-kV IEC ESD protection, VSON-8
- Pins
- 8
- Pads
- 9
- SMD
- 4.3×3.5