Components
48 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
ADM205
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 5 drivers and 5 receivers (tx/rx: 5/5), shutdown / enable pins, DIP-24 (600 mil)
- Pins
- 24
- Pads
- 24
- THT
- 17.3×31.0
Z8530
Interface_UART
SCC Serial Communication Controller, DIP-40
- Pins
- 40
- Pads
- —
- Mount
- —
ADM1485xRZ
Interface_UART
5V, Low Power, EIA RS-485 Transceiver, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX3051
Interface_UART
High-Speed CAN Transceiver, 1Mbps, 3.3V supply
- Pins
- 8
- Pads
- —
- Mount
- —
ST485E
Interface_UART
Half duplex RS-485/RS-422, 5 Mbps, ±15kV ESD, 5V supply, 256 bus load, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADM207
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 5 drivers and 3 receivers (tx/rx: 5/3), DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
MAX485E
Interface_UART
Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADM232A
Interface_UART
Dual RS232 driver/receiver, 5V supply, 200kb/s
- Pins
- 16
- Pads
- —
- Mount
- —
LTC2858xDD-1
Interface_UART
RS-485, RS-422 Full duplex 20Mbps transceiver, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.5
AZ75232GS
Interface_UART
RS232 interface IC, 3 drivers, 5 receivers, 3.3V/5V Vcc supply, bipolar Vdd/Vss supply, 120kb/s, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
MC68A50
Interface_UART
Asynchronous Communications Interface Adapter 1.5MHz, DIP-40
- Pins
- 24
- Pads
- 24
- THT
- 17.3×31.0
STR485
Interface_UART
RS-485, RS-422, half duplex transceiver, selectable speed 250 kbps or up to 20 Mbps, DFN-10 (VSON-10)
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.6
LTC2852xDD
Interface_UART
RS-485, RS-422 Full duplex 20Mbps transceiver, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.5
AZ75232G
Interface_UART
RS232 interface IC, 3 drivers, 5 receivers, 3.3V/5V Vcc supply, bipolar Vdd/Vss supply, 120kb/s, TSSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 7.7×7.0
AZ75232M
Interface_UART
RS232 interface IC, 3 drivers, 5 receivers, 3.3V/5V Vcc supply, bipolar Vdd/Vss supply, 120kb/s, SOIC-20
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
THVD1500
Interface_UART
Half duplex RS-485, 500 Kbps, 4.5V - 5.5V supply, ±8kV electro-static discharge (ESD) protection, with receiver/driver enable, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADM101E
Interface_UART
Single RS232 driver/receiver, 5V supply, 460kb/s
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
MAX3226
Interface_UART
Single RS232 driver/receiver, 3.0V to 5V supply, 250kb/s, AutoShutdown Plus, SSOP-16 package
- Pins
- 16
- Pads
- 16
- SMD
- 9.1×6.7
LTC2856xDD-1
Interface_UART
RS-485, RS-422 Half duplex 20Mbps transceiver, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.0×3.6
LTC2858xDD-2
Interface_UART
RS-485, RS-422 Full duplex 250kbps transceiver, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.5
LTC2856xDD-2
Interface_UART
RS-485, RS-422 Half duplex 250kbps transceiver, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.0×3.6
MC6850
Interface_UART
Asynchronous Communications Interface Adapter 1MHz, DIP-40
- Pins
- 24
- Pads
- 24
- THT
- 17.3×31.0
ADM211
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 5 receivers (tx/rx: 4/5), shutdown / enable pins, SOIC-28 / SSOP-28
- Pins
- 28
- Pads
- —
- Mount
- —
LTC2852xS
Interface_UART
RS-485, RS-422 Full duplex 20Mbps transceiver, SOIC-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2
MAX3227
Interface_UART
Single RS232 driver/receiver, 3.0V to 5V supply, 1Mb/s, AutoShutdown Plus, SSOP-16 package
- Pins
- 16
- Pads
- 16
- SMD
- 9.1×6.7
MAX14783ExS
Interface_UART
High-Speed 3.3V/5V RS-485/RS-422 Transceiver with ±35kV HBM ESD Protection, SOIC8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
THVD1451D
Interface_UART
RS485 transceiver, 3.3-V to 5-V, 18-kV IEC ESD Protection, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LTC2850xDD
Interface_UART
RS-485, RS-422 Half duplex 20Mbps transceiver, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.0×3.6
ADM206
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 3 receivers (tx/rx: 4/3), shutdown / enable pins, DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
THVD1400D
Interface_UART
Half duplex RS-485/RS-422, 500 Kbps, 3V - 5.5V supply, ±12kV electro-static discharge (ESD) protection, with receiver/driver enable, 32 receiver drive capacity, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
THVD1420D
Interface_UART
Half duplex RS-485/RS-422, 12 Mbps, 3V - 5.5V supply, ±12kV electro-static discharge (ESD) protection, with receiver/driver enable, 32 receiver drive capacity, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADM213
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 5 receivers (tx/rx: 4/5; 2 receivers active in shutdown), shutdown / enable pins, SOIC-28 / SSOP-28
- Pins
- 28
- Pads
- —
- Mount
- —
LTC2858xMS-1
Interface_UART
RS-485, RS-422 Full duplex 20Mbps transceiver, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LTC2858xMS-2
Interface_UART
RS-485, RS-422 Full duplex 250kbps transceiver, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LTC2852xMS
Interface_UART
RS-485, RS-422 Full duplex 20Mbps transceiver, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
MAX1487E
Interface_UART
Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, no low-power shutdown, with receiver/driver enable, 128 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX14830
Interface_UART
Quad UART with I2C/SPI interface, 128 Word FIFOs, IrDA SIR built-in support, TQFN-48
- Pins
- 49
- Pads
- 49
- SMD
- 8.3×8.3
LTC2857xDD-1
Interface_UART
RS-485, RS-422 Full duplex 250kbps transceiver, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.0×3.6
THVD1450D
Interface_UART
3.3-V to 5-V RS-485 transceiver with ±18-kV IEC ESD protection, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LT1785xS8
Interface_UART
RS-485, RS-422 Half duplex 250kbps transceiver, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LTC2851xDD
Interface_UART
RS-485, RS-422 Full duplex 20Mbps transceiver, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.0×3.6
ADM222
Interface_UART
Dual RS232 driver/receiver, 5V supply, 200kb/s
- Pins
- 18
- Pads
- —
- Mount
- —
MAX3485
Interface_UART
True RS-485/RS-422, 10Mbps, Slew-Rate Limited, with low-power shutdown, with receiver/driver enable, 32 receiver drive capacitity, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADM1491EBR
Interface_UART
RS-485, RS-422 full duplex 16Mbps transceiver, SOIC-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2
8250
Interface_UART
PC8250A, Universal Asynchronous Receiver/Transmitter, PDIP-40
- Pins
- 39
- Pads
- 40
- THT
- 17.3×51.3
MAX13432EETD
Interface_UART
RS485 transceiver, full duplex, dual supply, receiver/driver enable, 500kbps, DFN-14 package
- Pins
- 15
- Pads
- 15
- SMD
- 4.0×3.6
LTC2857xDD-2
Interface_UART
RS-485, RS-422 Full duplex 250kbps transceiver, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.0×3.6
LT1785AxS8
Interface_UART
RS-485, RS-422 Half duplex 250kbps transceiver, fail-safe receiver, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4