Components
48 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
CH334R
Interface_USB
USB HUB controller, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
FE1.1s
Interface_USB
USB 2.0 High Speed 4-Port Hub Controller, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 6.9×10.4
CH334U
Interface_USB
USB HUB controller, QSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 7.4×10.4
USB2504
Interface_USB
USB 2.0 4-Port Hub Hi-Speed Hub Controller
- Pins
- 64
- Pads
- 64
- SMD
- 13.4×13.4
MA8601
Interface_USB
USB 2.0 High Speed 4-Port Hub Controller, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 6.9×10.4
CH334F
Interface_USB
USB HUB controller, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
TUSB2036
Interface_USB
2- or 3-Port USB1.1 HUB with optional serial EEPROM
- Pins
- 32
- Pads
- 32
- SMD
- 10.4×10.4
USB2514B_Bi
Interface_USB
USB 2.0 Hi-Speed Hub Controller
- Pins
- 37
- Pads
- 37
- SMD
- 7.2×7.2
TUSB4041I
Interface_USB
Four-port USB 2.0 Hub, TQFP-64
- Pins
- 65
- Pads
- 65
- SMD
- 13.4×13.4
HUSB238A-xxxxx-QN16R
Interface_USB
USB-PD Sink IC Port Controller, VBUS = 3..48V, USB Type-C rev. 2.1, USB-PD rev. 3.1, BC1.2, QC2.0, WQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.2×4.2
TUSB7340
Interface_USB
USB 3.0 xHCI Host Controller
- Pins
- 105
- Pads
- 105
- SMD
- 9.9×9.9
TUSB8043A
Interface_USB
Four port USB 3.2 x1 Gen1 Hub
- Pins
- 65
- Pads
- 65
- SMD
- 10.3×10.3
TUSB8041
Interface_USB
four port USB 3.0 Hub
- Pins
- 65
- Pads
- 65
- SMD
- 10.3×10.3
FT4232H
Interface_USB
Hi Speed Quad Channel USB UART/FIFO, LQFP/QFN-64
- Pins
- 64
- Pads
- —
- Mount
- —
FT2232HQ
Interface_USB
Hi Speed Double Channel USB UART/FIFO, QFN-64
- Pins
- 65
- Pads
- 65
- SMD
- 10.2×10.2
FSUSB30MUX
Interface_USB
Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
FT2232HL
Interface_USB
Hi Speed Double Channel USB UART/FIFO, LQFP-64
- Pins
- 64
- Pads
- 64
- SMD
- 13.4×13.4
FSUSB42MUX
Interface_USB
Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) or UART Switch, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
TS3USBCA410
Interface_USB
USB Type-C, SBU 3:1 multiplexer, 500MHz bandwidth, UQFN-16
- Pins
- 16
- Pads
- 16
- SMD
- 3.0×3.8
TS3USBCA420
Interface_USB
USB Type-C, SBU 4:1 multiplexer, 500MHz bandwidth, UQFN-16
- Pins
- 16
- Pads
- 16
- SMD
- 3.0×3.8
FT2232HPQ
Interface_USB
High-Speed USB 2.0 Bridge, Type-C / PD3.0 controller, dual interface UART/FIFO/JTAG/SPI/I2C/bit-bang, VQFN-68
- Pins
- 69
- Pads
- 69
- SMD
- 9.2×9.2
HUSB238_xxxDD
Interface_USB
USB-PD Sink IC Port Controller, VBUS = 3..25V, USB Type-C rev. 1.4, USB-PD rev. 3.0, BC1.2, WDFN-10 / WSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.2×3.5
CP2112
Interface_USB
HID USB to SMBUS master bridge
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
FT232H
Interface_USB
Hi Speed Single Channel USB UART/FIFO, LQFP/QFN-48
- Pins
- 48
- Pads
- —
- Mount
- —
STULPI01B
Interface_USB
High-speed USB On-The-Go ULPI transceiver
- Pins
- 36
- Pads
- 36
- SMD
- 5.6×5.6
STULPI01A
Interface_USB
High-speed USB On-The-Go ULPI transceiver
- Pins
- 36
- Pads
- 36
- SMD
- 5.6×5.6
USB3740B-AI2
Interface_USB
USB 2.0 Switch with ESD Protection, UQFN-10 Pitch 0.4 mm
- Pins
- 10
- Pads
- —
- Mount
- —
CH236D
Interface_USB
USB fast charging interface PD2.0/3.0, PPS, BC1.2 , QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 4.3×4.3
FT4222HQ
Interface_USB
USB 2.0 to Quad SPI or I2C Bridge, VQFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
CH224K
Interface_USB
100W USB Type-C PD3.0/2.0, BC1.2 Sink Controller, SSOP-10
- Pins
- 11
- Pads
- 11
- SMD
- 7.5×5.4
CH344Q
Interface_USB
USB to Quad Serial Ports Chip, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
USB3740B-AI9
Interface_USB
USB 2.0 Switch with ESD Protection, UQFN-10 Pitch 0.5mm
- Pins
- 10
- Pads
- —
- Mount
- —
FT2232D
Interface_USB
Full Speed Double Channel USB UART/FIFO, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
STUSB4500QTR
Interface_USB
Stand-alone USB PD controller (with sink Auto-run mode), QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
CH9102F
Interface_USB
WCH-IC, Single-Chip USB-to-UART Bridge, USB 2.0 Full-Speed, 4Mbps UART, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
TUSB321
Interface_USB
USB Type-C Configuration Channel Logic and Port Control with VCONN, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
CYPD3177-24LQ
Interface_USB
Stand-alone USB PD controller (with sink Auto-run mode), QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
FUSB303BTMX
Interface_USB
USB Type-C port controller with I2C and GPIO control, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
CP2104
Interface_USB
Single-Chip USB-to-UART Bridge, USB 2.0 Full-Speed, 2Mbps UART, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
USB3300-EZK
Interface_USB
Hi-Speed USB Host, Device or OTG PHY with ULPI Interface
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
CP2108-xxx-xM
Interface_USB
Full Speed Quad Channel USB UART/FIFO, integrated clock and EEPROM, QFN-64
- Pins
- 65
- Pads
- 65
- SMD
- 10.2×10.2
BQ24392
Interface_USB
Dual SPST USB 2.0 High Speed Switch with USB Battery Charging Specification Revision 1.2 Detection, UQFN-10
- Pins
- 10
- Pads
- 10
- SMD
- 2.4×2.9
HD3SS6126
Interface_USB
USB 3.0 + USB 2.0 Differential Switch 2:1/1:2 MUX/DEMUX, WQFN-42
- Pins
- 43
- Pads
- 43
- SMD
- 4.8×10.3
TUSB320
Interface_USB
USB Type-C Configuration Channel Logic and Port Control, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
XR21B1424
Interface_USB
USB 2.0 up to 12Mbps, Quad Channel USB UART/FIFO, RS485 capability, LQFP-64
- Pins
- 64
- Pads
- 64
- SMD
- 13.4×13.4
MCP2221AxP
Interface_USB
USB to I2C/UART Protocol Converter with GPIO, DIP-14
- Pins
- 14
- Pads
- 14
- THT
- 9.7×18.3
CY7C65215-32LTXI
Interface_USB
USB-Serial Dual Channel Bridge with CapSense Full-Speed 12 Mbps, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422/JTAG, QFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
IP2721
Interface_USB
USB TYPEC PD Controller Interface, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5