Components
23 components matching “I”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
IP2721
Interface_USB
USB TYPEC PD Controller Interface, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
USB2514B_Bi
Interface_USB
USB 2.0 Hi-Speed Hub Controller
- Pins
- 37
- Pads
- 37
- SMD
- 7.2×7.2
CY7C65215-32LTXI
Interface_USB
USB-Serial Dual Channel Bridge with CapSense Full-Speed 12 Mbps, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422/JTAG, QFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
MCP2200-I-MQ
Interface_USB
USB 2.0 to UART Protocol Converter with GPIO, QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 6.2×6.2
MCP2200-I-SO
Interface_USB
USB 2.0 to UART Protocol Converter with GPIO, SOIC-20
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
MCP2200-I-SS
Interface_USB
USB 2.0 to UART Protocol Converter with GPIO, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
CY7C65211-24LTXI
Interface_USB
USB-Serial single channel bridge with capsense and BCD, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
CY7C65211A-24LTXI
Interface_USB
USB-Serial single channel bridge with capsense and BCD, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422/RS485, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
CY7C65213-28PVXI
Interface_USB
USB-UART LP Bridge Controller, full speed 12Mbps, +1.71V to 5.5V VDD, UART/RS232/RS422, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
CY7C65213-32LTXI
Interface_USB
USB-UART LP Bridge Controller, full speed 12Mbps, +1.71V to 5.5V VDD, UART/RS232/RS422, QFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
CY7C65213A-28PVXI
Interface_USB
USB-UART LP Bridge Controller, full speed 12Mbps, +1.71V to 5.5V VDD, UART/RS232/RS422/RS485, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
CY7C65213A-32LTXI
Interface_USB
USB-UART LP Bridge Controller, full speed 12Mbps, +1.71V to 5.5V VDD, UART/RS232/RS422/RS485, QFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
CY7C65215A-32LTXI
Interface_USB
USB-Serial Dual Channel Bridge with CapSense, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422/RS485/JTAG, QFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
MCP2200T-I-MQ
Interface_USB
USB 2.0 to UART Protocol Converter with GPIO, TnR, QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 6.2×6.2
MCP2200T-I-SO
Interface_USB
USB 2.0 to UART Protocol Converter with GPIO,TnR,SOIC
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
MCP2200T-I-SS
Interface_USB
USB 2.0 to UART Protocol Converter with GPIO, TnR, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
STULPI01A
Interface_USB
High-speed USB On-The-Go ULPI transceiver
- Pins
- 36
- Pads
- 36
- SMD
- 5.6×5.6
STULPI01B
Interface_USB
High-speed USB On-The-Go ULPI transceiver
- Pins
- 36
- Pads
- 36
- SMD
- 5.6×5.6
TUSB320I
Interface_USB
USB Type-C Configuration Channel Logic and Port Control, industrial temperature range, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
TUSB322I
Interface_USB
USB Type-C Configuration Channel Logic and Port Control with VCONN, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
TUSB4041I
Interface_USB
Four-port USB 2.0 Hub, TQFP-64
- Pins
- 65
- Pads
- 65
- SMD
- 13.4×13.4
USB3740B-AI2
Interface_USB
USB 2.0 Switch with ESD Protection, UQFN-10 Pitch 0.4 mm
- Pins
- 10
- Pads
- —
- Mount
- —
USB3740B-AI9
Interface_USB
USB 2.0 Switch with ESD Protection, UQFN-10 Pitch 0.5mm
- Pins
- 10
- Pads
- —
- Mount
- —