Components
80 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
FUSB302B11MPX
Interface_USB
Programmable USB Type-C Controller w/PD, I2C address 0x25, WQFN-14
- Pins
- 15
- Pads
- 15
- SMD
- 3.7×3.7
FUSB303BTMX
Interface_USB
USB Type-C port controller with I2C and GPIO control, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
FUSB307BMPX
Interface_USB
USB Type-C Port Controller with USB-PD, WQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.2×4.2
GL3224-ONY
Interface_USB
USB 3.0 Dual LUN Memory Card Reader Controller, external firmware support (SPI Flash Memory), WQFN-48
- Pins
- 49
- Pads
- 49
- SMD
- 8.3×8.3
HD3SS6126
Interface_USB
USB 3.0 + USB 2.0 Differential Switch 2:1/1:2 MUX/DEMUX, WQFN-42
- Pins
- 43
- Pads
- 43
- SMD
- 4.8×10.3
HUSB238_xxxDD
Interface_USB
USB-PD Sink IC Port Controller, VBUS = 3..25V, USB Type-C rev. 1.4, USB-PD rev. 3.0, BC1.2, WDFN-10 / WSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.2×3.5
HUSB238A-xxxxx-QN16R
Interface_USB
USB-PD Sink IC Port Controller, VBUS = 3..48V, USB Type-C rev. 2.1, USB-PD rev. 3.1, BC1.2, QC2.0, WQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.2×4.2
MP5034GJ
Interface_USB
USB charging port controller integrating QC 2.0/3.0 anc BC1.2 Protocol, TSOT-23-8
- Pins
- 8
- Pads
- 8
- SMD
- 4.1×3.4
MS2130
Interface_USB
USB 3.0 HD Video Capture Chip, 24 MHz external clock, VQFN-64
- Pins
- 65
- Pads
- 65
- SMD
- 10.2×10.2
TCPP03-M20
Interface_USB
USB-PD 3.1 controller with protection, Dual Role Power (DRP), OCP, OVP, WQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 5.3×5.3
TPS2513
Interface_USB
USB Dedicated Charging Port Controller
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
TPS2513A
Interface_USB
USB Dedicated Charging Port Controller
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
TPS25730D
Interface_USB
USB Type-C and USB PD Controller, Integrated Power Switches, QFN-38
- Pins
- 34
- Pads
- 34
- SMD
- 6.9×4.9
TS3USB30EDGSR
Interface_USB
ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
TS3USB30ERSWR
Interface_USB
ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable, UQFN-10
- Pins
- 10
- Pads
- 10
- SMD
- 2.6×3.0
TS3USBCA410
Interface_USB
USB Type-C, SBU 3:1 multiplexer, 500MHz bandwidth, UQFN-16
- Pins
- 16
- Pads
- 16
- SMD
- 3.0×3.8
TS3USBCA420
Interface_USB
USB Type-C, SBU 4:1 multiplexer, 500MHz bandwidth, UQFN-16
- Pins
- 16
- Pads
- 16
- SMD
- 3.0×3.8
TUSB2036
Interface_USB
2- or 3-Port USB1.1 HUB with optional serial EEPROM
- Pins
- 32
- Pads
- 32
- SMD
- 10.4×10.4
TUSB320
Interface_USB
USB Type-C Configuration Channel Logic and Port Control, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
TUSB320I
Interface_USB
USB Type-C Configuration Channel Logic and Port Control, industrial temperature range, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
TUSB321
Interface_USB
USB Type-C Configuration Channel Logic and Port Control with VCONN, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
TUSB322I
Interface_USB
USB Type-C Configuration Channel Logic and Port Control with VCONN, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
TUSB7340
Interface_USB
USB 3.0 xHCI Host Controller
- Pins
- 105
- Pads
- 105
- SMD
- 9.9×9.9
TUSB8043A
Interface_USB
Four port USB 3.2 x1 Gen1 Hub
- Pins
- 65
- Pads
- 65
- SMD
- 10.3×10.3