Components
41 components matching “b”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
BQ24392
Interface_USB
Dual SPST USB 2.0 High Speed Switch with USB Battery Charging Specification Revision 1.2 Detection, UQFN-10
- Pins
- 10
- Pads
- 10
- SMD
- 2.4×2.9
USB2514B_Bi
Interface_USB
USB 2.0 Hi-Speed Hub Controller
- Pins
- 37
- Pads
- 37
- SMD
- 7.2×7.2
FSUSB42MUX
Interface_USB
Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) or UART Switch, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
STUSB4500QTR
Interface_USB
Stand-alone USB PD controller (with sink Auto-run mode), QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
TUSB2036
Interface_USB
2- or 3-Port USB1.1 HUB with optional serial EEPROM
- Pins
- 32
- Pads
- 32
- SMD
- 10.4×10.4
USB3300-EZK
Interface_USB
Hi-Speed USB Host, Device or OTG PHY with ULPI Interface
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
FSUSB30MUX
Interface_USB
Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
TUSB8041
Interface_USB
four port USB 3.0 Hub
- Pins
- 65
- Pads
- 65
- SMD
- 10.3×10.3
USB3343
Interface_USB
Hi-Speed USB ULPI Transceiver, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
FT232BM
Interface_USB
Hi Speed Single Channel USB UART/FIFO, LQFP-32
- Pins
- 32
- Pads
- 32
- SMD
- 10.4×10.4
FT245BM
Interface_USB
Full Speed USB to 8-Bit FIFO, LQFP-32
- Pins
- 32
- Pads
- 32
- SMD
- 10.4×10.4
TS3USB30EDGSR
Interface_USB
ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
TS3USB30ERSWR
Interface_USB
ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable, UQFN-10
- Pins
- 10
- Pads
- 10
- SMD
- 2.6×3.0
TUSB8043A
Interface_USB
Four port USB 3.2 x1 Gen1 Hub
- Pins
- 65
- Pads
- 65
- SMD
- 10.3×10.3
USB2504
Interface_USB
USB 2.0 4-Port Hub Hi-Speed Hub Controller
- Pins
- 64
- Pads
- 64
- SMD
- 13.4×13.4
USB3341
Interface_USB
Hi-Speed USB ULPI Transceiver, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
USB3346
Interface_USB
Hi-Speed USB ULPI Transceiver, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
USB3347
Interface_USB
Hi-Speed USB ULPI Transceiver, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
XR21B1424
Interface_USB
USB 2.0 up to 12Mbps, Quad Channel USB UART/FIFO, RS485 capability, LQFP-64
- Pins
- 64
- Pads
- 64
- SMD
- 13.4×13.4
FUSB302BMPX
Interface_USB
Programmable USB Type-C Controller w/PD, I2C address 0x22, WQFN-14
- Pins
- 15
- Pads
- 15
- SMD
- 3.7×3.7
FUSB302B01MPX
Interface_USB
Programmable USB Type-C Controller w/PD, I2C address 0x23, WQFN-14
- Pins
- 15
- Pads
- 15
- SMD
- 3.7×3.7
TUSB320
Interface_USB
USB Type-C Configuration Channel Logic and Port Control, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8
FUSB302B10MPX
Interface_USB
Programmable USB Type-C Controller w/PD, I2C address 0x24, WQFN-14
- Pins
- 15
- Pads
- 15
- SMD
- 3.7×3.7
TUSB321
Interface_USB
USB Type-C Configuration Channel Logic and Port Control with VCONN, X2QFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 2.8×2.8