Components
23 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
ADM1270ACPZ
Power_Management
High Voltage Input Protection Device
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
ADM1270ARQZ
Power_Management
High Voltage Input Protection Device
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
EPC23102
Power_Management
GaN Half-Bridge Power-Stage with Integrated Gate-Drivers, 80 V, 35 A, EPC_QFN-13-3EP
- Pins
- 13
- Pads
- 13
- SMD
- 6.1×4.6
EPC23103
Power_Management
GaN Half-Bridge Power-Stage with Integrated Gate-Drivers, 80 V, 25 A, EPC_QFN-13-3EP
- Pins
- 13
- Pads
- 13
- SMD
- 6.1×4.6
EPC23104
Power_Management
GaN Half-Bridge Power-Stage with Integrated Gate-Drivers, 80 V, 15 A, EPC_QFN-13-3EP
- Pins
- 13
- Pads
- 13
- SMD
- 6.1×4.6
LM5060
Power_Management
High side protection controller, +5.5V to +65V operation, VSSOP-10 package
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LM50672NPAR
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, SOIC-14W
- Pins
- 10
- Pads
- 14
- SMD
- 11.9×9.5
LM5067MM-1
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
LM5067MM-2
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
LM5067MMX-2
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
LM5067MWX-1
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, SOIC-14W
- Pins
- 10
- Pads
- 14
- SMD
- 11.9×9.5
LM5069MM-1
Power_Management
Hot swap & Inrush current controller with power limiting, latch off on fault, 9V to 80Vin, UVLO & OVLO, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LM5069MM-2
Power_Management
Hot swap & Inrush current controller with power limiting, auto retry on fault, 9V to 80Vin, UVLO & OVLO, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LTC4364HDE
Power_Management
Surge stopper with ideal diode, UV and OV protection -40V to +80V, -40°C to +125°C, DFN-14
- Pins
- 15
- Pads
- 15
- SMD
- 4.1×4.6
LTC4364HMS
Power_Management
Surge stopper with ideal diode, UV and OV protection -40V to +80V, -40°C to +125°C, MSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 6.3×4.5
LTC4364HS
Power_Management
Surge stopper with ideal diode, UV and OV protection -40V to +80V, -40°C to +125°C, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
LTC4364IDE
Power_Management
Surge stopper with ideal diode, UV and OV protection -40V to +80V, -40°C to +85°C, DFN-14
- Pins
- 15
- Pads
- 15
- SMD
- 4.1×4.6
LTC4364IMS
Power_Management
Surge stopper with ideal diode, UV and OV protection -40V to +80V, -40°C to +85°C, MSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 6.3×4.5
LTC4364IS
Power_Management
Surge stopper with ideal diode, UV and OV protection -40V to +80V, -40°C to +85°C, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
MIC2587-1
Power_Management
Positive high voltage hot swap controller +10V to +80V with latched operation
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MIC2587R-1
Power_Management
Positive high voltage hot swap controller +10V to +80V with auto-retry operation
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SN6505ADBV
Power_Management
Low Noise, 1A, Transformer Drivers for Isolated Power Supplies, 160 kHz, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
SN6505BDBV
Power_Management
Low Noise, 1A, Transformer Drivers for Isolated Power Supplies, 420 kHz, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4