Components
5 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
Mousebites, Mechanical, 3mm
jlcpcb-JLCPCB-Manufacturing
Breakaway Mousebites based on Sparkfun's recomended parameters tweaked for PCM_JLCPCB
- Pins
- —
- Pads
- —
- Mount
- —
Mousebites, Cosmetic, 3mm
jlcpcb-JLCPCB-Manufacturing
Breakaway Mousebites based on Sparkfun's recomended parameters tweaked for PCM_JLCPCB
- Pins
- —
- Pads
- —
- Mount
- —
Mounting Hole, 3mm, Via Stiched
jlcpcb-JLCPCB-Manufacturing
- Pins
- 1
- Pads
- —
- Mount
- —
Part Number, PCM_JLCPCB, 0.8x0.15mm
jlcpcb-JLCPCB-Manufacturing
To indicate the location, simply add the text "JLCJLCJLCJLC" to the silk layer and select the "Specify a location" option when placing your order. Please note that if this option is not chosen, we may not notice that you have added the text. Note: Use only "JLCJLCJLCJLC" without any additional characters. The font size should be larger than 0.8mm in height and 0.15mm in width.
- Pins
- —
- Pads
- —
- Mount
- —
Tooling Hole, PCM_JLCPCB, 1.152mm
jlcpcb-JLCPCB-Manufacturing
1. Two or three tooling holes should be added on the PCB, they should be placed in opposite corners of the PCB and as far apart from one another as practical. 2. Tooling holes should be 1.152mm(45.4mil) round non-plated holes with 0.148mm solder mask expansion. 3. Tooling holes are only required for PCB assembly orders. 4. Please try to add tooling holes on empty space and keep them away from traces. If there is no enough room, you can add them to the copper area.
- Pins
- —
- Pads
- —
- Mount
- —