Get Trace

Components

5 components matching “mm”

A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.

I need
SymbolFootprint3D model

Any part. Pick what you need to narrow it down.

5 components

Matched by name and keywords. Search by meaning instead

no footprint

Mounting Hole, 3mm, Via Stiched

SYM——

jlcpcb-JLCPCB-Manufacturing

Pins
1
Pads
—
Mount
—
no footprint

Mousebites, Cosmetic, 3mm

SYM——

jlcpcb-JLCPCB-Manufacturing

Breakaway Mousebites based on Sparkfun's recomended parameters tweaked for PCM_JLCPCB

Pins
—
Pads
—
Mount
—
no footprint

Mousebites, Mechanical, 3mm

SYM——

jlcpcb-JLCPCB-Manufacturing

Breakaway Mousebites based on Sparkfun's recomended parameters tweaked for PCM_JLCPCB

Pins
—
Pads
—
Mount
—
no footprint

Part Number, PCM_JLCPCB, 0.8x0.15mm

SYM——

jlcpcb-JLCPCB-Manufacturing

To indicate the location, simply add the text "JLCJLCJLCJLC" to the silk layer and select the "Specify a location" option when placing your order. Please note that if this option is not chosen, we may not notice that you have added the text. Note: Use only "JLCJLCJLCJLC" without any additional characters. The font size should be larger than 0.8mm in height and 0.15mm in width.

Pins
—
Pads
—
Mount
—
no footprint

Tooling Hole, PCM_JLCPCB, 1.152mm

SYM——

jlcpcb-JLCPCB-Manufacturing

1. Two or three tooling holes should be added on the PCB, they should be placed in opposite corners of the PCB and as far apart from one another as practical. 2. Tooling holes should be 1.152mm(45.4mil) round non-plated holes with 0.148mm solder mask expansion. 3. Tooling holes are only required for PCB assembly orders. 4. Please try to add tooling holes on empty space and keep them away from traces. If there is no enough room, you can add them to the copper area.

Pins
—
Pads
—
Mount
—