Components
48 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
TPS2514
Interface_USB
USB Dedicated Charging Port Controller
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
BQ24013
Battery_Management
Single-Chip Li-Ion Charge Management IC, VSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.9×3.9
CN3063
Battery_Management
Constant-current/constant voltage linear charger for single cell Li-ion and Li Polymer batteries ideally suited for solar powered systems, 0.6A, SOIC-8-1EP
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4
TPS2514A
Interface_USB
USB Dedicated Charging Port Controller
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
TPS2513A
Interface_USB
USB Dedicated Charging Port Controller
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
BQ2501x
Battery_Management
500mA Li-Ion Charger w/Integrated 150mA Synchronous Buck Converter, QFN-14
- Pins
- 21
- Pads
- 21
- SMD
- 4.4×5.4
BQ25798
Battery_Management
I2C controlled, 5A Buck-Boost battery charger (1-4 cell, Li-Ion / Li-Polymer), USB BC1.2 / HVDCP detection, 3.6..24V VBUS, 3..18.8V charge voltage regulation, 0.75..1.5 MHz, VQFN-29 (Texas RQM0029A)
- Pins
- 29
- Pads
- 29
- SMD
- 4.9×4.9
TPS2513
Interface_USB
USB Dedicated Charging Port Controller
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
MP5034GJ
Interface_USB
USB charging port controller integrating QC 2.0/3.0 anc BC1.2 Protocol, TSOT-23-8
- Pins
- 8
- Pads
- 8
- SMD
- 4.1×3.4
LTC4011CFE
Battery_Management
High efficiency standalone NiMH battery charger, HTSSOP-20
- Pins
- 21
- Pads
- 21
- SMD
- 7.7×7.0
BQ25886RGE
Battery_Management
Standalone 2-Cell (Li-Ion / Li-Polymer), 2A Boost-Mode Battery Charger With PowerPath, USB BC1.2 Detection, USB On-The-Go Boost (OTG), 4.3..6.2V VBUS, 8.2/8.4/8.7/8.8V charge voltage, 9.2V BATOVP, 1.5MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
MAX1811
Battery_Management
USB Powered Li+ Charger, 4.1V/4.2V battery, 5V input, 0.1/0.5A charging current
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
CH455H
Driver_LED
Digital tube driver and keyboard scan (common cathode only), with interrupt/current setting, SOP-18
- Pins
- 18
- Pads
- 18
- SMD
- 11.9×12.0
SLM6800
Battery_Management
1.5A, 2-Cell 8.4V, standalone switch-mode Li-Ion Charger, 5Vin, 750kHz, QFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
BQ25895RTW
Battery_Management
I2C Controlled Single Cell (Li-Ion / Li-Polymer) 5A Fast Charger with MaxCharge, USB BC1.2 Detection, 3.9..14V VBUS, 3.840..4.608V charge voltage range, 1.5 MHz (buck mode) and 500 kHz /1.5 MHz (boost mode), WQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
MCP1640Bx-xCHY
Regulator_Switching
Synchronous Boost Regulator, Adjustable Output 2.0V-5.5V, PWM Only True Disconnect, SOT-23
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
MAX713CPE
Battery_Management
Fast-charge Nickel Cadmium (NiCd) from a DC source, 0 to +70 Degree Celsius, PDIP-16
- Pins
- 16
- Pads
- 16
- THT
- 9.7×20.8
CH455G
Driver_LED
Digital tube driver and keyboard scan (common cathode only), SOIC-16 (SOP-16)
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
MAX712CPE
Battery_Management
Fast-charge Nickel Metal Hydride (NiMH) from a DC source, 0 to +70 Degree Celsius, PDIP-16
- Pins
- 16
- Pads
- 16
- THT
- 9.7×20.8
MCP1640Dx-xCHY
Regulator_Switching
Synchronous Boost Regulator, Adjustable Output 2.0V-5.5V, PWM Only Input to Output Bypass, SOT-23
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
MCP1640Bx-xMC
Regulator_Switching
Synchronous Boost Regulator, Adjustable Output 2.0V-5.5V, PWM Only True Disconnect, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.2×2.6
BQ24133RGY
Battery_Management
Synchronous switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs and power path selector, Texas R-PVQFN-N24
- Pins
- 25
- Pads
- 25
- SMD
- 4.8×6.8
BQ24392
Interface_USB
Dual SPST USB 2.0 High Speed Switch with USB Battery Charging Specification Revision 1.2 Detection, UQFN-10
- Pins
- 10
- Pads
- 10
- SMD
- 2.4×2.9
CH455K
Driver_LED
Digital tube driver and keyboard scan (common cathode only), with interrupt/current setting, DIP-18
- Pins
- 18
- Pads
- 18
- THT
- 9.7×23.4
BQ24610
Battery_Management
10A, 28V max voltage, Li-Ion Charger w/600kHz NMOS-NMOS Synchronous Buck Converter, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
MCP1640Dx-xMC
Regulator_Switching
Synchronous Boost Regulator, Adjustable Output 2.0V-5.5V, PWM Only Input to Output Bypass, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.2×2.6
LTC4007
Battery_Management
4A high efficiency standalone Li-ion battery charger, SSOP-24
- Pins
- 24
- Pads
- 24
- SMD
- 6.9×9.3
LTC4002EDD-4.2
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
MCP73833-xxx-MF
Battery_Management
Stand-Alone Linear Li-Ion / Li-Polymer Charge Management Controller, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.2×3.5
AM29F400BB-90SC
Memory_Flash
4-Mbit (512k x 8-bit / 256k x 16-bit) CMOS 5.0 Volt-only Boot Sector Flash Memory, SOP-44
- Pins
- 44
- Pads
- 44
- SMD
- 17.5×28.7
BQ25887RGE
Battery_Management
I2C Controlled 2-Cell (Li-Ion / Li-Polymer), 2A boost-mode battery charger with cell balancing for USB input, 3.9..6.2V VBUS, 3.4..4.6V charge voltage regulation range (per cell), 1.5 MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
LTC4060EFE
Battery_Management
Complete fast charging system for 2, 3 or 4 series NiMH or NiCd batteries, 0.4 to 2A, 4.5 to 10V VDD, -40 to +85 degree Celcisus, TSSOP-16
- Pins
- 17
- Pads
- 17
- SMD
- 7.0×5.7
AM29F400Bx-xxSx
Memory_Flash
4-Mbit (512k x 8-bit / 256k x 16-bit) CMOS 5.0 Volt-only Boot Sector Flash Memory, SOP-44
- Pins
- 44
- Pads
- 44
- SMD
- 17.5×28.7
LTC4001-1
Battery_Management
Single cell (4.1V) programmable synchronous buck Li-Ion charger, 2A, 5.5V input, QFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
AT49F001NT-xxJx
gekkio-Gekkio_Memory_Flash
1Mb (128K x 8) 5-volt Only Flash Memory, PLCC-32
- Pins
- 32
- Pads
- 32
- SMD
- 13.1×15.6
BQ25601
Battery_Management
I2C Controlled 3A Single-Cell Battery Charger for High Input Voltage and Narrow Voltage DC Power Path Management, WQFN-32
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
LTC4060EDHC
Battery_Management
Complete fast charging system for 2, 3 or 4 series NiMH or NiCd batteries, 0.4 to 2A, 4.5 to 10V VDD, -40 to +85 degree Celcisus, DFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.0×5.6
AT49F002-xxJx
gekkio-Gekkio_Memory_Flash
2Mb (256K x 8) 5-volt Only Flash Memory, PLCC-32
- Pins
- 32
- Pads
- 32
- SMD
- 13.1×15.6
CN3791
kiml-00-kiml-battery-management
Battery Management ICs and charger with MPPT tracking
- Pins
- 10
- Pads
- 10
- SMD
- 6.7×5.4
AT49F002NT-xxJx
gekkio-Gekkio_Memory_Flash
2Mb (256K x 8) 5-volt Only Flash Memory, PLCC-32
- Pins
- 32
- Pads
- 32
- SMD
- 13.1×15.6
MCP73871-2CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.20V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
AT49F001N-xxJx
gekkio-Gekkio_Memory_Flash
1Mb (128K x 8) 5-volt Only Flash Memory, PLCC-32
- Pins
- 32
- Pads
- 32
- SMD
- 13.1×15.6
LTC4001
Battery_Management
Single cell (4.2V) programmable synchronous buck Li-Ion charger, 2A, 5.5V input, QFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
AT49F002N-xxJx
gekkio-Gekkio_Memory_Flash
2Mb (256K x 8) 5-volt Only Flash Memory, PLCC-32
- Pins
- 32
- Pads
- 32
- SMD
- 13.1×15.6
LTC4002EDD-8.4
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 8.9-22V input, double cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
BQ24005
Battery_Management
2-Cell Li-Ion Charge Management IC, HTSSOP-20
- Pins
- 21
- Pads
- 21
- SMD
- 7.8×7.0
AT49F001T-xxJx
gekkio-Gekkio_Memory_Flash
1Mb (128K x 8) 5-volt Only Flash Memory, PLCC-32
- Pins
- 32
- Pads
- 32
- SMD
- 13.1×15.6