Components
48 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
LTC4007
Battery_Management
4A high efficiency standalone Li-ion battery charger, SSOP-24
- Pins
- 24
- Pads
- 24
- SMD
- 6.9×9.3
LTC3553
Battery_Management
Micropower USB Power Manager With Li-Ion Charger, LDO and Buck Regulator, 4.2V float, QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 4.3×4.3
BQ24012
Battery_Management
Single-Chip Li-Ion Charge Management IC, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×4.3
CN3063
Battery_Management
Constant-current/constant voltage linear charger for single cell Li-ion and Li Polymer batteries ideally suited for solar powered systems, 0.6A, SOIC-8-1EP
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4
BQ24013
Battery_Management
Single-Chip Li-Ion Charge Management IC, VSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.9×3.9
CN3163
Battery_Management
Constant-current/constant voltage linear charger for single cell Li-ion and Li Polymer batteries ideally suited for solar powered systems, 1A, SOIC-8-1EP
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4
BQ297xy
Battery_Management
Voltage and Current Protection for Single-Cell Li-Ion and Li-Polymer Batteries
- Pins
- 6
- Pads
- 6
- SMD
- 2.4×2.0
AP9101CK
Battery_Management
Li+ Battery Protection IC for Single Cell Pack, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
AP9101CK6
Battery_Management
Li+ Battery Protection IC for Single Cell Pack, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
SLM6800
Battery_Management
1.5A, 2-Cell 8.4V, standalone switch-mode Li-Ion Charger, 5Vin, 750kHz, QFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
BQ24133RGY
Battery_Management
Synchronous switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs and power path selector, Texas R-PVQFN-N24
- Pins
- 25
- Pads
- 25
- SMD
- 4.8×6.8
SW_NKK_GW12LJPCF
Switch
Switch, single pole double throw, illuminated paddle, red and green LEDs
- Pins
- 6
- Pads
- 6
- THT
- 8.0×5.5
LTC4001-1
Battery_Management
Single cell (4.1V) programmable synchronous buck Li-Ion charger, 2A, 5.5V input, QFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
BQ24166RGE
Battery_Management
High efficiency switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs, power path selector and standard temperature sensing, Texas R-RGE0024H
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
CN3170
Battery_Management
JEITA-Compliant 1-Cell Lithium Battery Charger IC for Solar-Powered Systems, 0.95A, SOIC-8-1EP
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4
LTC4001
Battery_Management
Single cell (4.2V) programmable synchronous buck Li-Ion charger, 2A, 5.5V input, QFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
BQ25886RGE
Battery_Management
Standalone 2-Cell (Li-Ion / Li-Polymer), 2A Boost-Mode Battery Charger With PowerPath, USB BC1.2 Detection, USB On-The-Go Boost (OTG), 4.3..6.2V VBUS, 8.2/8.4/8.7/8.8V charge voltage, 9.2V BATOVP, 1.5MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
LTC4002ES8-8.4
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 8.9-22V input, double cell, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LTC4002EDD-8.4
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 8.9-22V input, double cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
LTC4002ES8-4.2
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
BQ24167RGE
Battery_Management
High efficiency switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs, power path selector and JEITA compatible temperature sensing, Texas R-RGE0024H
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
LTC4002EDD-4.2
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
TP4056-42-ESOP8
Battery_Management
1A Standalone Linear Li-ion/LiPo single-cell battery charger, 4.2V ±1% charge voltage, VCC = 4.0..8.0V, SOIC-8 (SOP-8)
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4
BQ25040
Battery_Management
1.1A, single cell Li-ion battery charger with 50mA LDO, up to 30V input, WSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.3×3.5
BQ2501x
Battery_Management
500mA Li-Ion Charger w/Integrated 150mA Synchronous Buck Converter, QFN-14
- Pins
- 21
- Pads
- 21
- SMD
- 4.4×5.4
MCP73833-xxx-MF
Battery_Management
Stand-Alone Linear Li-Ion / Li-Polymer Charge Management Controller, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.2×3.5
SW_Nidec_CAS-120A1
Switch
Switch, single pole double throw
- Pins
- 3
- Pads
- 3
- SMD
- 4.4×5.9
BQ21040DBVR
kiml-00-kiml-battery-management
0.8-A, Single-Input, Single Cell Li-Ion and Li-Pol Battery Charger
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
MCP73871-1CC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.10V, 6h safety timer, 3.1V LBO threshold
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MCP73871-2CC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.20V, 6h safety timer, 3.1V LBO threshold
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
LTC4055-1
Battery_Management
USB Power Controller and Li-Ion Charger (4.1V Float Voltage)
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
MCP73831-2-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73831-3-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
BQ29330DBT
Battery_Management
2/3/4 Cell Lithium-Ion or Lithium-Polymer Battery Protection AFE, TSSOP-30
- Pins
- 30
- Pads
- 30
- SMD
- 7.7×8.3
MCP73832-2-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73871-3CC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, 6h safety timer, 3.1V LBO threshold
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MCP73832-3-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73831-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
BQ25570
Battery_Management
Nano Power Boost Charger and Buck Converter for Energy Harvester Powered Applications, QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 4.8×4.8
BQ21040DBV
Battery_Management
Single cell, 0.8A Li-Ion/Li-Po linear charge management controller, up to 30V input, 4.2V charge voltage, Open-Drain Status Output, Temperature sense input, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
MCP73832-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73831-2-MC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Tri-State Status Output, in DFN-8 package
- Pins
- 8
- Pads
- 9
- SMD
- 4.2×2.5
MCP73831-4-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.40V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73833-xxx-UN
Battery_Management
Stand-Alone Linear Li-Ion / Li-Polymer Charge Management Controller, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LTC4055
Battery_Management
USB Power Controller and Li-Ion Charger (4.2V Float Voltage)
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
MCP73871-4CC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.40V, 6h safety timer, 3.1V LBO threshold
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MCP73832-4-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.40V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4