Components
19 components matching “ISO”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
ISO3088DW
Interface_UART
20 Mbps, Isolated 5-V Half-Duplex RS-485 transceiver, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
ISO7340C
Isolator
Low Power Quad-Channel 4/0 Digital Isolator, 25Mbps 31ns, Fail-Safe High, SO16
- Pins
- 15
- Pads
- 16
- SMD
- 11.9×10.8
TJA1052i-2
Interface_CAN_LIN
Isolated CAN Transceiver 2.5kV, up to 5Mbps
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
AMC1100DWV
Isolator_Analog
Fully-differential isolated amplifier, fixed gain = 8, peak isolation voltage 4250V, transient immunity 2.5kV/us, UL1577/IEC60747-5-2 approved, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 13.0×6.4
Si8642BB-B-IS
Isolator
Low-Power Quad-Channel Digital Isolator, 150Mbps, 2.5-5.5V, 2.5kV isolation, Fail-Safe Low, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
CAT811STBI-GT3
Power_Supervisor
Power supply supervisor, Manual reset, Threshold 2.93V, SOT-143
- Pins
- 4
- Pads
- 4
- SMD
- 3.2×3.4
LNK454D
Regulator_Switching
LinkSwitch-PL Family, 3W Output Power, SO-8C
- Pins
- 7
- Pads
- 7
- SMD
- 7.4×5.4
NXE2S1215MC
Regulator_Switching
2W 12V to 15V 400mA DC-DC Converter with 3kV isolation
- Pins
- 5
- Pads
- 5
- SMD
- 12.2×13.2
TMR_1-1223SM
Regulator_Switching
±33mA Regulated 1W DC/DC converter with 1.5kV isolation, 9V-18V input, ±15V fixed Output Voltage, SMD
- Pins
- 7
- Pads
- 7
- SMD
- 19.1×19.6
ACS710xLATR-25BB
Sensor_Current
±25A Bidirectional, Hall-Effect Current Sensor, Latched Fault, +3.3V to +5.0V supply, 28mV/A @ +5.0V, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
ACS718xMATR-10B
Sensor_Current
±10A Bidirectional, Hall-Effect Current Sensor, +5.0V supply, 200mV/A, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
ACS720xMATR-35B
Sensor_Current
±35A Bidirectional, Hall-Effect Current Sensor, +5.0V supply, 38.5mV/A, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
ATA00CC36S-L
Converter_DCDC
Artesyn 3W Isolated DC/DC Converter Module, ±15V Output Voltage, 18-75V Input Voltage
- Pins
- 7
- Pads
- 7
- SMD
- 19.8×24.5
ATA00F18S-L
Converter_DCDC
Artesyn 2W Isolated DC/DC Converter Module, 3.3V Output Voltage, 9-36V Input Voltage
- Pins
- 7
- Pads
- 7
- SMD
- 19.8×24.5
ISU0248S15
Converter_DCDC
XP Power 2W Isolated DC/DC Converter Module, 15V Output Voltage, 18-75V Input Voltage
- Pins
- 7
- Pads
- 7
- SMD
- 19.1×19.5
RPM3.3-3.0
Converter_DCDC
3A non-isolated switching regulator power module, 3-17V input voltage, 3.3V output voltage, DOSA
- Pins
- 25
- Pads
- 25
- SMD
- 14.2×14.2
ADM2582E
Interface_UART
Isolated RS485/RS422 Transceiver,Integrated Isolated DC-DC Converter, 16Mbps,SO-20
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
FODM217C
Isolator
DC Optocoupler, Vce 80V, CTR 200-400%, SOP-4
- Pins
- 4
- Pads
- 4
- SMD
- 8.5×3.1
MOCD217M
Isolator
8-pin SOIC Dual-Channel Phototransistor Output Optocoupler, VCEO 30V, VF 1.05-1.3V (IF 1mA), CTR 100%, SOIC8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4