Components
505 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
ADG733BRQ
Analog_Switch
Triple SPDT CMOS Analog Switch, 2.5Ohm Ron, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
ADG733BRU
Analog_Switch
Triple SPDT CMOS Analog Switch, 2.5Ohm Ron, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
ADG734
Analog_Switch
Quad SPDT CMOS Analog Switch, 2.5Ohm Ron, TSSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 7.7×7.0
TMUX1108PW
Analog_Switch
5V / ±2.5V, Low-Leakage-Current, 8:1 Precision Multiplexer, 2.5 Ohm Ron, 90Mhz, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
TMUX1108RSV
Analog_Switch
5V / ±2.5V, Low-Leakage-Current, 8:1 Precision Multiplexer, 2.5 Ohm Ron, 90Mhz, QFN-16
- Pins
- 16
- Pads
- 16
- SMD
- 3.0×3.8
TMUX131RMG
Analog_Switch
Low Capacitance, R_{on} 5.5Ω, 2-Channel, 3:1 Switch, 2.5-4.3V, WQFN-12
- Pins
- 12
- Pads
- 12
- SMD
- 3.1×3.1
DS2745U
Battery_Management
Current-flow, voltage and temperature measurement to support battery capacity monitoring, 2.5V to 4.5V VDD, -40 to +85 degree Celsius, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 5.9×3.6
MAX9031AU
Comparator
Single, Rail to Rail, 2.5V - 5.5V Supply, 571mW, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MAX9031AX
Comparator
Single, Rail to Rail, 2.5V - 5.5V Supply, 247mW, SC70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
LTM8049
Converter_DCDC
Dual SEPIC or Inverting μModule DC/DC Converter, 2.6 to 20V input, 2.5V to 24V or -2.5V to -24V output, 1A @ 5V output current per converter, BGA-77 package.
- Pins
- 77
- Pads
- 77
- SMD
- 11.0×17.0
MYRGPxx0060x21RC
Converter_DCDC
PicoBK Inductor Built-in Step-Down “mini DC/DC” Converters. 3MHz, input 2V to 6V, fixed output voltage 0.8V to 4V, 600mA output current. 2.5 x 2.0mm.
- Pins
- 9
- Pads
- 9
- SMD
- 3.0×3.6
MYRGPxx0060x21RF
Converter_DCDC
PicoBK Inductor Built-in Step-Down “mini DC/DC” Converters. 3MHz, input 1.8V to 6V, adjustable output voltage 0.9V to 4V, 600mA output current. 2.5 x 2.0mm.
- Pins
- 9
- Pads
- 9
- SMD
- 3.0×3.6
TPS54240DRC
Converter_DCDC
3.5-V to 42-V 2.5A Step-Down DC DC Converter, VSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.9×3.9
TSR0.5-2425SM
Converter_DCDC
0.5A step-down regulator, fixed 2.5V output voltage, 4.75-32V input voltage, LM78xx replacement, SMD-10
- Pins
- 10
- Pads
- 10
- SMD
- 15.3×16.8
2ED21824S06J
Driver_FET
650V Half Bridge Gate Driver with Integrated Bootstrap Diode, 2.5A drive current, SOIC-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2
ACPL-336J
Driver_FET
2.5A Gate Drive Optocoupler with Integrated LED Driver, Active Miller Clamp, DESAT Detection, and Fault & UVLO Status Feedback, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
IRS2113M
Driver_FET
High- and Low-Side Driver, 600V, 2.5/2.5A, MLPQ-14
- Pins
- 15
- Pads
- 15
- SMD
- 5.1×5.1
AP3019AKTR
Driver_LED
1.2MHz White LED Boost Drivers with Built-in Schottky, 2.5..16Vin, <30Vout, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
AP3019AKTTR
Driver_LED
1.2MHz White LED Boost Drivers with Built-in Schottky, 2.5..16Vin, <30Vout, ThinSOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
KTD2061xxUAC
Driver_LED
36-channel (12xRGB) LED driver with I²C Control, VCC = VIN = 2.5..5.5V, 23kHz MUX frequency, UQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 4.2×4.2
MPQ2483DQ
Driver_LED
55V, 2.5A Programmable Frequency LED Driver, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.5
SN74CB3T16210DGG
gekkio-Gekkio_Logic_LevelTranslator
20-bit FET bus switch, 2.5-V/3.3-V low-voltage bus switch with 5-V tolerant level shifter, TSSOP-48
- Pins
- 48
- Pads
- 48
- SMD
- 9.4×13.0
SN74CB3T16210DGV
gekkio-Gekkio_Logic_LevelTranslator
20-bit FET bus switch, 2.5-V/3.3-V low-voltage bus switch with 5-V tolerant level shifter, TVSOP-48
- Pins
- 48
- Pads
- 48
- SMD
- 7.7×10.2
SN74CB3T16211DGG
gekkio-Gekkio_Logic_LevelTranslator
24-bit FET bus switch, 2.5-V/3.3-V low-voltage bus switch with 5-V tolerant level shifter, TSSOP-56
- Pins
- 56
- Pads
- 56
- SMD
- 9.4×14.5