Components
328 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
TLC27M2xPW
Amplifier_Operational
LinCMOS Precision Dual Operational Amplifiers, VIO_max = 10mV (at 25°C), VDD = 3..16V (C suffix) / VDD = 4..16V (I / M suffix), 525kHz unity-gain bandwidth (VDD = 5V, TA = 25°C), TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.7×3.5
TLV9061xDPW
Amplifier_Operational
10-MHz, RRIO, CMOS Operational Amplifiers for Cost-Sensitive Systems, X2SON
- Pins
- 5
- Pads
- 5
- SMD
- 1.8×1.3
AD5689RxRUZ
Analog_DAC
Dual, 16-Bit nanoDAC+ with 2 ppm/°C Reference, SPI Interface, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
ADG633YCP
Analog_Switch
Triple SPDT CMOS Analog Switch, 52Ohm Ron, LFCSP-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.2×5.2
DG418LEUA_Maxim
Analog_Switch
Single SPST 3V Logic Compatible CMOS Analog Switch, normally OFF, 35Ohm Ron, Maxim-variant without Vlogic, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
MAX14778
Analog_Switch
Dual ±25V Above- and Below-the-Rails 4:1 Analog Multiplexer, TQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 6.2×6.2
MAX324CUA
Analog_Switch
Dual SPST CMOS Analog Switches, normally ON, 60Ohm Ron, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
LTC4002EDD-4.2
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
MAX1873REEE
Battery_Management
Charger for 2 lithium-ion (Li+), 5/6 NickelCadium (NiCD) cells or 5/6 NickelMetalHydride (NiMH), 9 to 28V VDD, -40 to +85 degree Celsius, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
ATA00CC36S-L
Converter_DCDC
Artesyn 3W Isolated DC/DC Converter Module, ±15V Output Voltage, 18-75V Input Voltage
- Pins
- 7
- Pads
- 7
- SMD
- 19.8×24.5
ATA00F18S-L
Converter_DCDC
Artesyn 2W Isolated DC/DC Converter Module, 3.3V Output Voltage, 9-36V Input Voltage
- Pins
- 7
- Pads
- 7
- SMD
- 19.8×24.5
ISU0248S15
Converter_DCDC
XP Power 2W Isolated DC/DC Converter Module, 15V Output Voltage, 18-75V Input Voltage
- Pins
- 7
- Pads
- 7
- SMD
- 19.1×19.5
LMZM23600
Converter_DCDC
0.5A Adjustable Step-Down DC/DC Power Module in 3.8x3mm, MicroSIP-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.4×3.5
LMZM23600V3
Converter_DCDC
0.5A 3.3V Step-Down DC/DC Power Module in 3.8x3mm, MicroSIP-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.4×3.5
LMZM23601V3
Converter_DCDC
1A 3.3V Step-Down DC/DC Power Module in 3.8x3mm, MicroSIP-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.4×3.5
RPM3.3-3.0
Converter_DCDC
3A non-isolated switching regulator power module, 3-17V input voltage, 3.3V output voltage, DOSA
- Pins
- 25
- Pads
- 25
- SMD
- 14.2×14.2
SLG46826G
CPLD_Renesas
GreenPAK Programmable Mixed-Signal Matrix with In-System Programmability, TSSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 7.7×7.0
BZV55B68
Diode
68V, 500mW, 2%, Zener diode, MiniMELF
- Pins
- 2
- Pads
- 2
- SMD
- 5.3×2.2
BZV55C24
Diode
24V, 500mW, 5%, Zener diode, MiniMELF
- Pins
- 2
- Pads
- 2
- SMD
- 5.3×2.2
BZX384xxxx
Diode
300mW Zener Diode, SOD-323
- Pins
- 2
- Pads
- 2
- SMD
- 3.2×1.9
SMAJ85A
Diode
400W unidirectional Transient Voltage Suppressor, 85.0Vr, SMA(DO-214AC)
- Pins
- 2
- Pads
- 2
- SMD
- 7.0×3.5
MCP25625x-x-SS
Interface_CAN_LIN
Stand-Alone CAN Controller with SPI Interface and integated Transceiver, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
TJA1052i-2
Interface_CAN_LIN
Isolated CAN Transceiver 2.5kV, up to 5Mbps
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8