Components
356 components matching “Protected”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
THVD1451D
Interface_UART
RS485 transceiver, 3.3-V to 5-V, 18-kV IEC ESD Protection, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
THVD1500
Interface_UART
Half duplex RS-485, 500 Kbps, 4.5V - 5.5V supply, ±8kV electro-static discharge (ESD) protection, with receiver/driver enable, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADUM4160
Interface_USB
Full/Low Speed, iCoupler USB Digital Isolator, 5kV protection, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
TXB0101DBV
Logic_LevelTranslator
1-Bit Bidirectional Voltage-Level Translator With Auto Direction Sensing and ±15-kV ESD Protection, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
TXB0104RGY
Logic_LevelTranslator
4-Bit Bidirectional Voltage-Level Translator, Auto Direction Sensing and ±15-kV ESD Protection, 1.2 - 3.6V APort, 1.65 - 5.5V BPort, Texas_PVGFN-14
- Pins
- 15
- Pads
- 15
- SMD
- 4.8×4.8
24C02Cx-x-SN
Memory_EEPROM
2-Kbit (256 x 8-bit) I2C Serial EEPROM, chip address inputs (A0, A1, A2), write-protect pin (WP), 4.5..5.5V supply, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADM1270ACPZ
Power_Management
High Voltage Input Protection Device
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
LTC4359-MS8
Power_Management
Ideal diode controller with reverse input protection, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LTC4364IMS
Power_Management
Surge stopper with ideal diode, UV and OV protection -40V to +80V, -40°C to +85°C, MSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 6.3×4.5
LTC4365DDB
Power_Management
UV, OV and Reverse Supply Protection Controller, 50/60Hz noise rejection, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 3.3×3.5
LTC4365TS8
Power_Management
UV, OV and Reverse Supply Protection Controller, 50/60Hz noise rejection, TSOT23-8
- Pins
- 8
- Pads
- 8
- SMD
- 4.1×3.4
TPS26600RHF
Power_Management
60V, 2A Current Limiting, Industrial eFuse, Reverse Current Blocking, Adjustable Overvoltage cut-off, Active Current Limiting, Circuit Breaker with auto-retry, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×6.3
TPS26630RGE
Power_Management
60V, 6A Power Limiting, Surge Protection Industrial eFuse, Adjustable Overvoltage cut-off, Active Current Limiting, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
TPS26632RGE
Power_Management
60V, 6A Power Limiting, Surge Protection Industrial eFuse, 35V fixed Overvoltage clamp, Active Current Limiting, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
CM1213A-01SO
Power_Protection
Single Channel ESD Protection Array
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.4
DT1240A-08LP3810
Power_Protection
Low Capacitance TVS Diode Array, 3.3V Standoff, 8 Channels, UDFN-9
- Pins
- 9
- Pads
- 9
- SMD
- 2.1×4.3
ESD224DQA
Power_Protection
4-Channel Low Capacitance TVS Diode Array, DFN-10 / USON-10
- Pins
- 10
- Pads
- 10
- SMD
- 1.9×3.0
ESDA14V2SC5
Power_Protection
Quad TVS Diode Array, 14.2V Standoff, 4 Channels, 400W, ±30kV, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
ESDA5V3SC5
Power_Protection
Quad TVS Diode Array, 5.3V Standoff, 4 Channels, 400W, ±30kV, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
IP4234CZ6
Power_Protection
ESD Protection, 2 channel, USB 2.0 to IEC 61000-4-2 level 4, 5.5V, SOT457 (SC-74-6)
- Pins
- 6
- Pads
- 6
- SMD
- 4.4×3.4
IP4252CZ16
Power_Protection
8 channel EMI filters with integrated ESD protection, 12 pF, 40 Ohm
- Pins
- 17
- Pads
- 17
- SMD
- 2.6×3.8
NUF4401MN
Power_Protection
4 channel EMI filters with integrated ESD protection, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 3.2×2.5
NUP2202
Power_Protection
Transient voltage suppressor designed to protect high speed data lines from ESD, EFT, and lightning
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2
PESD5V0L5UF
Power_Protection
Low capacitance unidirectional fivefold ESD protection diode array, 5.0V, Common Anode, SOT-886
- Pins
- 6
- Pads
- 6
- SMD
- 1.5×2.0