Components
2,686 components matching “E”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
REF5025AD
Reference_Voltage
2.5V 0.1% 10mA Low Noise Precision Voltage Reference, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
APE8865N-33-HF-3
Regulator_Linear
300mA Low Dropout Voltage Regulator, Fixed Output 3.3V, SOT-23
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.4
ATECC608B-SSHDA
Security
Cryptographic Co-Processor with Secure Hardware-based 16 Key Storage, ECDSA and ECDH support, I2C, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX31855EASA
Sensor_Temperature
Cold Junction E-type Thermocouple Interface, SPI, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MCP9700Ax-ETT
Sensor_Temperature
Low power, analog thermistor temperature sensor, ±2C accuracy, -40C to +125C, in SOT-23-3
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.4
BUK9M11-40EX
Transistor_FET
53A Id, 40V Vds, N-Channel TrenchMOS MOSFET, 9mOhm Ron, 13.4nC Qqd, -55 to 175 °C, LFPAK33
- Pins
- 5
- Pads
- 5
- SMD
- 4.4×3.8
DG412xUE
Analog_Switch
Quad SPST Monolithic CMOS Analog Switches, normally OFF, 17Ohm Ron, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
WM8731SEDS
Audio
Portable Internet Audio CODEC with Headphone Driver and Programmable Sample Rates, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
LT3652EDD
Battery_Management
Step-down battery charger for solar power, Lithium Phosphate (LiFePO4), Lead (Pb), Lithium+ (Li+) , 4.95V to 32V VDD, 2A, -40 to +125 degree Celsius, DFN-12
- Pins
- 13
- Pads
- 13
- SMD
- 4.3×3.5
LT3652EMSE
Battery_Management
Step-down battery charger for solar power, Lithium Phosphate (LiFePO4), Lead (Pb), Lithium+ (Li+) , 4.95V to 32V VDD, 2A, -40 to +125 degree Celsius, MSOP-12
- Pins
- 13
- Pads
- 13
- SMD
- 6.3×4.5
LT3652IMSE
Battery_Management
Step-down battery charger for solar power, Lithium Phosphate (LiFePO4), Lead (Pb), Lithium+ (Li+) , 4.95V to 32V VDD, 2A, -40 to +125 degree Celsius, MSOP-12
- Pins
- 13
- Pads
- 13
- SMD
- 6.3×4.5
B130-E3
Diode
30V 1A Schottky Barrier Rectifier Diode, SMA(DO-214AC)
- Pins
- 2
- Pads
- 2
- SMD
- 7.0×3.5
ESD131-B1-W0201
Diode
Bidirectional ESD protection diode, ±5.5Vrwm, 0.23pF, SG-WLL-2-3
- Pins
- 2
- Pads
- 2
- SMD
- 1.1×0.8
PMEG10010ELR
Diode
100V, 1A low leakage current MEGA Schottky barrier rectifier, SOD-123W
- Pins
- 2
- Pads
- 2
- SMD
- 4.5×2.2
PMEG2010ER
Diode
20V, 1A low Vf MEGA Schottky barrier rectifier, SOD-123W
- Pins
- 2
- Pads
- 2
- SMD
- 4.5×2.2
PMEG2020EH
Diode
20V, 2A very low Vf MEGA Schottky barrier rectifier, SOD-123F
- Pins
- 2
- Pads
- 2
- SMD
- 4.4×2.3
PMEG3020EH
Diode
30V, 2A ultra low Vf MEGA Schottky barrier rectifier, SOD-123F
- Pins
- 2
- Pads
- 2
- SMD
- 4.4×2.3
PMEG6010CEJ
Diode
60V, 1A very low Vf MEGA Schottky barrier rectifier, SOD-323F
- Pins
- 2
- Pads
- 2
- SMD
- 3.2×1.9
FAN3111E
Driver_FET
High Speed Low Side MOSFET Gate Driver with logic voltage reference input, 4.5-18 V, 1.0 A, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
LED1642GWTTR
Driver_LED
16-channel LED driver with error detection, current gain control and 12/16 bit PWM brightness control, TSSOP-24
- Pins
- 24
- Pads
- 24
- SMD
- 7.7×8.3
VNH5019A-E
Driver_Motor
Full Bridge Motor Driver, 41V, 30A, -40 to 150C, MultiPowerSO-30
- Pins
- 33
- Pads
- 33
- SMD
- 20.1×17.7
ISL3178E
Interface_UART
20Mbps, 3.3V RS-485 transceiver, ±15-kV IEC ESD protection, -7V..+12V common mode voltage, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ISL3280ExHZ
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 5.5V, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MAX481E
Interface_UART
Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, with low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4