Components
335 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
ICE40HX4K-BG121
FPGA_Lattice
iCE40 HX FPGA, 3520 LUTs, 1.2V, BGA-121
- Pins
- 121
- Pads
- 121
- SMD
- 11.0×11.0
MCP25625x-x-SS
Interface_CAN_LIN
Stand-Alone CAN Controller with SPI Interface and integated Transceiver, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
TJA1052i-2
Interface_CAN_LIN
Isolated CAN Transceiver 2.5kV, up to 5Mbps
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
DS2484Q
Interface_Expansion
I2C to 1-Wire bridge, single-channel (master device), adjustable timing and sleep mode, WSON-8 (Maxim TDFN-8 / T823+1)
- Pins
- 9
- Pads
- 9
- SMD
- 4.1×2.5
MCP23017x-x-SS
Interface_Expansion
16-bit I/O expander, I2C, interrupts, w pull-ups, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
ADM2582E
Interface_UART
Isolated RS485/RS422 Transceiver,Integrated Isolated DC-DC Converter, 16Mbps,SO-20
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
ISO3088DW
Interface_UART
20 Mbps, Isolated 5-V Half-Duplex RS-485 transceiver, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
LT1785xS8
Interface_UART
RS-485, RS-422 Half duplex 250kbps transceiver, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SC16IS752IPW
Interface_UART
Dual UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, TSSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 7.7×10.2
SC16IS762IPW
Interface_UART
Dual UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, TSSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 7.7×10.2
CY7C65215-32LTXI
Interface_USB
USB-Serial Dual Channel Bridge with CapSense Full-Speed 12 Mbps, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422/JTAG, QFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
FT232BM
Interface_USB
Hi Speed Single Channel USB UART/FIFO, LQFP-32
- Pins
- 32
- Pads
- 32
- SMD
- 10.4×10.4
MCP2221AxSL
Interface_USB
USB to I2C/UART Protocol Converter with GPIO, SOIC-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2
AMC1100DWV
Isolator_Analog
Fully-differential isolated amplifier, fixed gain = 8, peak isolation voltage 4250V, transient immunity 2.5kV/us, UL1577/IEC60747-5-2 approved, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 13.0×6.4
FODM217C
Isolator
DC Optocoupler, Vce 80V, CTR 200-400%, SOP-4
- Pins
- 4
- Pads
- 4
- SMD
- 8.5×3.1
ISO7340C
Isolator
Low Power Quad-Channel 4/0 Digital Isolator, 25Mbps 31ns, Fail-Safe High, SO16
- Pins
- 15
- Pads
- 16
- SMD
- 11.9×10.8
MOCD217M
Isolator
8-pin SOIC Dual-Channel Phototransistor Output Optocoupler, VCEO 30V, VF 1.05-1.3V (IF 1mA), CTR 100%, SOIC8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
Si8642BB-B-IS
Isolator
Low-Power Quad-Channel Digital Isolator, 150Mbps, 2.5-5.5V, 2.5kV isolation, Fail-Safe Low, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
WS2822S
LED
RGB LED with integrated controller
- Pins
- 6
- Pads
- 6
- SMD
- 6.9×5.5
TXB0104YZT
Logic_LevelTranslator
4-Bit Bidirectional Voltage-Level Translator, Auto Direction Sensing and ±15-kV ESD Protection, 1.2 - 3.6V APort, 1.65 - 5.5V BPort, DSBGA-12
- Pins
- 12
- Pads
- 12
- SMD
- 3.4×3.9
AT89C4051-24S
MCU_Microchip_8051
24MHz, 4kB Flash, 128B SRAM, SOIC-20
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
ATmega162-16M
MCU_Microchip_ATmega
16MHz, 16kB Flash, 1kB SRAM, 512B EEPROM, JTAG, QFN-44
- Pins
- 45
- Pads
- 45
- SMD
- 8.3×8.3
ATmega48PA-A
MCU_Microchip_ATmega
20MHz, 4kB Flash, 512B SRAM, 256B EEPROM, TQFP-32
- Pins
- 32
- Pads
- 32
- SMD
- 10.3×10.3
ATmega640-16C
MCU_Microchip_ATmega
16MHz, 64kB Flash, 8kB SRAM, 4kB EEPROM, JTAG, TFBGA-100
- Pins
- 100
- Pads
- 100
- SMD
- 11.0×11.0