Components
721 components matching “11”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
A1101xLH
Sensor_Magnetic
Hall effect switch, unipolar (south-polarity), Bop=100G, Brp=45G, 3.8-24V supply, SOT-23W
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.5
A1104xLH
Sensor_Magnetic
Hall effect switch, unipolar (south-polarity), Bop=70-350G, Brp=50-330G, 3.8-24V supply, SOT-23W
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.5
TMAG5111B2xxDBV
Sensor_Magnetic
2-dimensional, dual channel, speed & dir output, Hall effect latch, ZX, 1.4 mT, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TMP116xxDRV
Sensor_Temperature
Digital Temperature Sensor with I2C/SMBus Interface, 16 bits, ±0.3°C, one-shot conversion, alert, nist traceable, EEPROM, WSON
- Pins
- 6
- Pads
- 7
- SMD
- 2.7×2.5
SSM2211CP
Amplifier_Audio
1.5W BTL or 250mW SE 4MHz-bandwidth high performance amplifier, LFCSP-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×3.5
AD8211
Amplifier_Current
65V High Voltage, Current Shunt Monitor, 20V/V gain, bandwidth 500kHz, Vcc=5V, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
NCS211
Amplifier_Current
Current-Shunt Monitor, Voltage Output, Bi-Directional Zero-Drift, 500V/V Gain, SC-70-6
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2
NCV211
Amplifier_Current
Current-Shunt Monitor, Voltage Output, Bi-Directional Zero-Drift, 500V/V Gain, SC-70-6
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2
ZXCT1109
Amplifier_Current
Low Power High-Side Current Monitors, SOT-23
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.4
LTC1100xSW
Amplifier_Instrumentation
Single Precision, Zero-Drift Instrumentation Amplifier, Gain = 10/100, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
LPV811DBV
Amplifier_Operational
Single operational amplifier, 8kHz GBW, 425 nA/channel quiescent, 100 fA input bias, 300 uV offset max, 1 uV/C, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
LTC1151CSW
Amplifier_Operational
Dual ±15V, Zero-Drift, Operational Amplifier, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
OP1177AR
Amplifier_Operational
Precision Low Noise, Low Input Bias Current Operational Amplifier, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
OP1177ARM
Amplifier_Operational
Precision Low Noise, Low Input Bias Current Operational Amplifier, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
TSV911IDT
Amplifier_Operational
Single rail-to-rail input/output 8 MHz operational amplifiers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
TSV911RILT
Amplifier_Operational
Single rail-to-rail input/output 8 MHz operational amplifiers, reversed power pins, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
LTC2311-16
Analog_ADC
16-Bit, 5Msps Differential Input ADC with Wide Input Common Mode Range, LVDS/CMOS interface, MSOP-16
- Pins
- 17
- Pads
- 17
- SMD
- 6.3×4.5
MAX1112
Analog_ADC
8-Channel Single-Ended or 4-Channel Differential 8-Bit ADC, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
MAX1113
Analog_ADC
4-Channel Single-Ended or 2-Channel Differential 8-Bit ADC, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
MAX11612
Analog_ADC
4-channel single-ended or 2-channel, differential, 12-bit ADC, I2C, 4.096V internal reference, 8-MSOP package
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
MAX11614
Analog_ADC
8-channel single-ended or 4-channel, differential, 12-bit ADC, I2C, 4.096V internal reference, 16-QSOP package
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
MAX11616
Analog_ADC
12-channel single-ended or 6-channel, differential, 12-bit ADC, I2C, 4.096V internal reference, 16-QSOP package
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
MAX11617
Analog_ADC
12-channel single-ended or 6-channel, differential, 12-bit ADC, I2C, 2.048V internal reference, 16-QSOP package
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
DAC6311xDCK
Analog_DAC
10-Bit, Single-Channel, Voltage Output, Serial Interface Digital-to-Analog Converters, SC-70
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2