Components
208 components matching “Mode”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
TJA1051T-3
Interface_CAN_LIN
High-Speed CAN Transceiver, separate VIO, silent mode, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
BUK7880-55A
Transistor_FET
7A Id, 55V Vds, N-Channel Enhancement Mode MOSFET, SOT-223
- Pins
- 3
- Pads
- 3
- SMD
- 8.8×7.2
BQ25895RTW
Battery_Management
I2C Controlled Single Cell (Li-Ion / Li-Polymer) 5A Fast Charger with MaxCharge, USB BC1.2 Detection, 3.9..14V VBUS, 3.840..4.608V charge voltage range, 1.5 MHz (buck mode) and 500 kHz /1.5 MHz (boost mode), WQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
TJA1051T
Interface_CAN_LIN
High-Speed CAN Transceiver, silent mode, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
BSP89
Transistor_FET
0.35A Id, 240V Vds, N-Channel Enhancement Mode MOSFET, SOT-223
- Pins
- 3
- Pads
- 3
- SMD
- 8.8×7.2
STUSB4500QTR
Interface_USB
Stand-alone USB PD controller (with sink Auto-run mode), QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
INA196
Amplifier_Current
Current Shunt Monitor −16V to +80V Common-Mode Range, 20V/V, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
LM4810
Amplifier_Audio
Boomer Dual 105mW Headphone Amplifier with Active-High Shutdown Mode, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 5.9×3.6
CA-IF1042LVS
Interface_CAN_LIN
High-Speed CAN Transceiver up to 5 Mbps, separate VIO, standby mode, ±30V bus common mode voltage, 5V supply, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
TJA1042T
Interface_CAN_LIN
High-Speed CAN Transceiver, standby mode, split pin, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
TJA1042T-3
Interface_CAN_LIN
High-Speed CAN Transceiver, separate VIO, standby mode, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ISL3178E
Interface_UART
20Mbps, 3.3V RS-485 transceiver, ±15-kV IEC ESD protection, -7V..+12V common mode voltage, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
UC3843_SOIC8
Regulator_Controller
Current-Mode PWM Controllers, 100% Duty Cycle, 8.4V/7.6V UVLO, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LTC3406ES5
Regulator_Switching
600mA Synchronous Step-Down Regulator, 1.5MHz, Adjustable Output Voltage, Burst Mode, ThinSOT-23
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TPS62175DQC
Regulator_Switching
500mA Step-Down Converter with Sleep Mode, adjustable Output Voltage, 4.75-28V input voltage, WSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.3×3.5
TPS62177DQC
Regulator_Switching
500mA Step-Down Converter with Sleep Mode, fixed 3.3V Output Voltage, 4.75-28V input voltage, WSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.3×3.5
DMT6008LFG
Transistor_FET
60A Id, 60V Vds, N-Channel Enhancement Mode MOSFET, 7.5mOhm Ron, 50.4nC Qg(typ), PowerDI-3333-8
- Pins
- 5
- Pads
- 5
- SMD
- 4.2×3.8
LM4811
Amplifier_Audio
Boomer Dual 105mW Headphone Amplifier with Digital Volume Control and Shutdown Mode, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
INA194
Amplifier_Current
Current Shunt Monitor −16V to +80V Common-Mode Range, 50V/V, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
INA195
Amplifier_Current
Current Shunt Monitor −16V to +80V Common-Mode Range, 100V/V, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
INA200D
Amplifier_Current
Current Shunt Monitor, integrated comparator and reference, -16V to +80V Common-Mode Range, 20V/V, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LTC2358-16
Analog_ADC
LTC2358 Buffered Octal, 16 bit, 200ksps/Ch Differential ±10.24V Simultaneous Sampling ADC, 30Vpp common mode range, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
MCP2557FD-xSN
Interface_CAN_LIN
CAN FD Transceiver with Silent Mode, up to 8 Mbps, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MCP2558FD-xMF
Interface_CAN_LIN
CAN FD Transceiver with Silent Mode, up to 8 Mbps, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×3.5