Components
344 components matching “a”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
APE8865N-16-HF-3
Regulator_Linear
300mA Low Dropout Voltage Regulator, Fixed Output 1.6V, SOT-23
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.4
APE8865NL-28-HF-3
Regulator_Linear
300mA Low Dropout Voltage Regulator, Fixed Output 2.8V, SOT-23
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.4
APE8865U4-15-HF-3
Regulator_Linear
300mA Low Dropout Voltage Regulator, Fixed Output 1.5V, SC-70-4
- Pins
- 4
- Pads
- 4
- SMD
- 2.9×2.2
APE8865U5-15-HF-3
Regulator_Linear
300mA Low Dropout Voltage Regulator, Fixed Output 1.5V, SC-70-5
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
APE8865U5-18-HF-3
Regulator_Linear
300mA Low Dropout Voltage Regulator, Fixed Output 1.8V, SC-70-5
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
AZ1117CH2-ADJ
Regulator_Linear
1A Adjustable LDO Linear Regulator, 15V Max Input, SOT-223
- Pins
- 3
- Pads
- 3
- SMD
- 8.8×7.2
ADP1108AN-3.3
Regulator_Switching
Micropower DC-DC converter, step-up or step-down operation, 2V-30Vin, 3.3V fixed output voltage, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
APE1707M-50-HF
Regulator_Switching
2A, 150KHz PWM Buck DC/DC Converter, fixed 5.0V output voltage, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
AQH3223
Relay_SolidState
Random Phase Opto-Triac, Vdrm 600V, Ift 10mA, IT 1.2A, DIP-7
- Pins
- 7
- Pads
- 7
- THT
- 9.8×10.7
AT86RF233-Z
RF_ZigBee
ZigBee transceiver, 2.4GHz, AES, SPI, 1.8 to 3.6V, QFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
ACS710xLATR-25BB
Sensor_Current
±25A Bidirectional, Hall-Effect Current Sensor, Latched Fault, +3.3V to +5.0V supply, 28mV/A @ +5.0V, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
ACS718xMATR-10B
Sensor_Current
±10A Bidirectional, Hall-Effect Current Sensor, +5.0V supply, 200mV/A, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
ACS720xMATR-35B
Sensor_Current
±35A Bidirectional, Hall-Effect Current Sensor, +5.0V supply, 38.5mV/A, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
AS5048B
Sensor_Magnetic
Magnetic position sensor, 14-bit, PWM output, I2C Interface, TSSOP-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.7×5.5
INA290A3xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Ultra Precise, Gain 100 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
OPA2333xxDRB
Amplifier_Operational
Dual 1.8V, microPower, CMOS Operational Amplifiers, Zero-Drift Series, SON-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.2×3.6
OPA365xxDBV
Amplifier_Operational
50-MHz, Zero-Crossover, Low-Distortion, High CMRR, RRI/O, Single-Supply, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
OPA810xDBV
Amplifier_Operational
140-MHz, Rail-to-Rail Input and Output, FET-Input Operational Amplifier, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
DG418LEUA_Maxim
Analog_Switch
Single SPST 3V Logic Compatible CMOS Analog Switch, normally OFF, 35Ohm Ron, Maxim-variant without Vlogic, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
MAX14778
Analog_Switch
Dual ±25V Above- and Below-the-Rails 4:1 Analog Multiplexer, TQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 6.2×6.2
MAX324CUA
Analog_Switch
Dual SPST CMOS Analog Switches, normally ON, 60Ohm Ron, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
MAX1873REEE
Battery_Management
Charger for 2 lithium-ion (Li+), 5/6 NickelCadium (NiCD) cells or 5/6 NickelMetalHydride (NiMH), 9 to 28V VDD, -40 to +85 degree Celsius, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
MCP73871-3CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
IA1205S
Converter_DCDC
XP Power 1W, 1000 VDC Isolated DC/DC Converter Module, Dual Output Voltage ±5V, ±100mA, 12V Input Voltage, SIP
- Pins
- 5
- Pads
- 5
- THT
- 7.6×20.8