Components
2,896 components matching “i”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
ITS716G
Driver_FET
Smart High-Side Power Switch for Industrial Applications, Four Channels, Rds 140mΩ, SOIC-20W
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
ITS724G
Driver_FET
Smart High-Side Power Switch for Industrial Applications, Four Channels, Rds 90mΩ, SOIC-20W
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
LTC4440IMS8
Driver_FET
High-side, N-Channel, Mosfet driver, 80V input, -40°C to +125°C, MSOP-8
- Pins
- 9
- Pads
- 9
- SMD
- 6.3×3.5
LTC4440IS6
Driver_FET
High-side, N-Channel, Mosfet driver, 80V input, -40°C to +85°C, SOT23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
DIO5661ST6
Driver_LED
37V Step-up LED driver with PWM, 2.7-5.5Vin, 1.3A Iout max, SOT23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
DIO5661TST6
Driver_LED
37V Step-up LED driver with PWM, 2.7-5.5Vin, 1.3A Iout max, TSOT23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
IS31FL3216
Driver_LED
16 channel LED controller with audio modulation mode, QFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 5.2×5.2
IS31FL3216A
Driver_LED
16 channel LED controller with audio modulation mode, QFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 5.2×5.2
IS31FL3218-QF
Driver_LED
18 LED matrix driver with 8-bit PWM, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
IS31FL3733-TQ
Driver_LED
12x16 LED matrix driver with 8-bit PWM and breathing, TQFP-48
- Pins
- 49
- Pads
- 49
- SMD
- 10.3×10.3
MBI5252GP
Driver_LED
16-Channel, 14-bit PWM constant current LED sink driver with built-in 8K-bit SRAM, 6-bit current gain, LED open detection, SSOP-24
- Pins
- 24
- Pads
- 24
- SMD
- 6.9×9.3
EMC2302-x-AIZL
Driver_Motor
Dual RPM-Based PWM Fan Controller, up to 26 kHz, 3.3V power supply, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
DSPIC33EP256MU810-xPT
DSP_Microchip_DSPIC33
High-Performance, 16-bit Digital Signal Controller, 40MIPS, 256k Flash, 30k SRAM, TQFP-100
- Pins
- 100
- Pads
- 100
- SMD
- 17.3×17.3
DSPIC33FJ64MC802-xSP
DSP_Microchip_DSPIC33
40 MIPS, 64k Flash, 16k SRAM, DIP-28
- Pins
- 28
- Pads
- 28
- THT
- 9.7×36.1
ESP32-PICO-V3
espressif-Espressif
The ESP32-PICO-V3 is a System-in-Package (SiP) device that is based on ESP32 with ECO V3 wafer, providingcomplete Wi-Fi and Bluetooth®functionalities. It integrates a 4 MB SPI flash.
- Pins
- 42
- Pads
- 49
- SMD
- 8.3×8.3
ICE40HX4K-BG121
FPGA_Lattice
iCE40 HX FPGA, 3520 LUTs, 1.2V, BGA-121
- Pins
- 121
- Pads
- 121
- SMD
- 11.0×11.0
MIC920xC5
gekkio-Gekkio_Amplifier_Operational
80 MHz Low-Power Op Amp, SC-70-5
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
OPA210IDBV
gekkio-Gekkio_Amplifier_Operational
Single 18MHz, Rail-to-Rail Output, 2.2-nV/√Hz Precision, Low-Power, 36-V Operational Amplifier, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
OPA2210ID
gekkio-Gekkio_Amplifier_Operational
Dual 18MHz, Rail-to-Rail Output, 2.2-nV/√Hz Precision, Low-Power, 36-V Operational Amplifier, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
TLV2316ID
gekkio-Gekkio_Amplifier_Operational
Dual 10-MHz, Rail-to-Rail Input/Output, Low-Voltage, 1.8-V CMOS Operational Amplifier, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
TLV316IDBV
gekkio-Gekkio_Amplifier_Operational
Single 10-MHz, Rail-to-Rail Input/Output, Low-Voltage, 1.8-V CMOS Operational Amplifier, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TLV316IDCK
gekkio-Gekkio_Amplifier_Operational
Single 10-MHz, Rail-to-Rail Input/Output, Low-Voltage, 1.8-V CMOS Operational Amplifier, SC-70-5
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
TLV4316ID
gekkio-Gekkio_Amplifier_Operational
Quad 10-MHz, Rail-to-Rail Input/Output, Low-Voltage, 1.8-V CMOS Operational Amplifier, SOIC-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2
TLV4316IPW
gekkio-Gekkio_Amplifier_Operational
Quad 10-MHz, Rail-to-Rail Input/Output, Low-Voltage, 1.8-V CMOS Operational Amplifier, TSSOP-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.7×5.5