Components
12 components matching “S1”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
ISU0248S15
Converter_DCDC
XP Power 2W Isolated DC/DC Converter Module, 15V Output Voltage, 18-75V Input Voltage
- Pins
- 7
- Pads
- 7
- SMD
- 19.1×19.5
NCS1S1203SC
Converter_DCDC
Isolated 1W 4:1 input DC/DC converter module, 4.5-18V input voltage, 3.3V output voltage, SIP
- Pins
- 5
- Pads
- 5
- THT
- 23.1×9.3
BAS16TW
Diode
Fast switching diode array 3 independent
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2
US1K
Diode
800V, 1A, General Purpose Rectifier Diode, SMA(DO-214AC)
- Pins
- 2
- Pads
- 2
- SMD
- 7.0×3.5
R7FS12878xA01CFL
MCU_Renesas_Synergy_S1
ARM Cortex-M0+ MCU, 32MHz, 256KB Flash, 24KB RAM, 1.65-3.6V, 37 GPIO, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
AT24CS16-STUM
Memory_EEPROM
I2C Serial EEPROM, 16Kb (2048x8) with Unique Serial Number, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
AMS1117-1.5
Regulator_Linear
1A Low Dropout regulator, positive, 1.5V fixed output, SOT-223
- Pins
- 3
- Pads
- 3
- SMD
- 8.8×7.2
AMS1117-5.0
Regulator_Linear
1A Low Dropout regulator, positive, 5.0V fixed output, SOT-223
- Pins
- 3
- Pads
- 3
- SMD
- 8.8×7.2
NXE2S1215MC
Regulator_Switching
2W 12V to 15V 400mA DC-DC Converter with 3kV isolation
- Pins
- 5
- Pads
- 5
- SMD
- 12.2×13.2
DS1307N+
Timer_RTC
64 x 8, Serial, I2C Real-time clock, 4.5V to 5.5V VCC, -40°C to +85°C, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
BS170F
Transistor_FET
0.15A Id, 60V Vds, N-Channel MOSFET, SOT-23
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.4
STGIPS10C60-H
Transistor_Power_Module
10 A, 600 V, 20KHz, 33Wx6, 3-phase, Control Logic, Positive Input , Freewheeling Diode, Undervoltage Lockout, Interlocking, Shut down (SD), Comparator, SDIP-25L
- Pins
- 25
- Pads
- 25
- THT
- 44.9×28.1