Components
4,522 components matching “7”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
NC7SB3157L6X
Analog_Switch
Single SPDT Low-Voltage Analog Switch or 2:1 Multiplexer/De-Multiplexer Bus Switch, 10Ohm Ron, MicroPak-6
- Pins
- 6
- Pads
- 6
- SMD
- 1.8×1.9
TMUX1574DYY
Analog_Switch
Low Capacitance, 4-Channel, 2 to 1 Switch, Powered-off Protection with 1.8V logic, TSOT-23-16
- Pins
- 16
- Pads
- 16
- SMD
- 4.6×4.7
TMUX1574RSV
Analog_Switch
Low Capacitance and low resistance 2Ω, 4-Channel, 2:1 Switch, Powered-off Protection with 1.8V logic, 1.5 - 5.5V, UQFN-16
- Pins
- 16
- Pads
- 16
- SMD
- 3.0×3.8
TS3A5017RSV
Analog_Switch
Dual SP4T Analog Switch Mux Demux, UQFN-16
- Pins
- 16
- Pads
- 16
- SMD
- 3.0×3.8
TS5A23157RSE
Analog_Switch
Dual 10 ohms SPDT Analog Switch, UQFN-10
- Pins
- 10
- Pads
- 10
- SMD
- 2.4×2.9
ADAU1761
Audio
SigmaDSP Stereo, Low Power, 96 kHz, 24-bit Audio Codec with Integrated PLL, VQFN-32 (LFCSP-32)
- Pins
- 33
- Pads
- 33
- SMD
- 6.2×6.2
ADAU1978xBCP
Audio
Quad Analog-to-Digital Converter, 2Vrms differential inputs, LFCSP-40
- Pins
- 41
- Pads
- 41
- SMD
- 7.3×7.3
MAX98357B
Audio
Mono DAC with amplifier, I2S, left-justified, TDM, 32-bit, 96khz, 3.2W, TQFP-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.2×4.2
THAT5171
Audio
High-Performance Digital Preamplifier Controller IC, QFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 8.3×8.3
THAT5173
Audio
Audio Preamplifier Digital Controller IC, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 6.3×6.3
APW7261
Battery_Management
USB-OTG switch-mode lithium battery charger, WLCSP-20
- Pins
- 20
- Pads
- 20
- SMD
- 3.8×4.0
BQ24079RGT
Battery_Management
USB-Friendly Li-Ion Battery Charger and Power-Path Management, VQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
BQ24617
Battery_Management
10A, 24V max voltage, Li-Ion Charger w/600kHz NMOS-NMOS Synchronous Buck Converter, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ25798
Battery_Management
I2C controlled, 5A Buck-Boost battery charger (1-4 cell, Li-Ion / Li-Polymer), USB BC1.2 / HVDCP detection, 3.6..24V VBUS, 3..18.8V charge voltage regulation, 0.75..1.5 MHz, VQFN-29 (Texas RQM0029A)
- Pins
- 29
- Pads
- 29
- SMD
- 4.9×4.9
CN3170
Battery_Management
JEITA-Compliant 1-Cell Lithium Battery Charger IC for Solar-Powered Systems, 0.95A, SOIC-8-1EP
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4
MAX17261xxTD
Battery_Management
5.1μA Multi-Cell Fuel Gauge with ModelGauge m5 EZ, TDFN-14
- Pins
- 15
- Pads
- 15
- SMD
- 4.3×3.5
MCP73831-3-MC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, Tri-State Status Output, in DFN-8 package
- Pins
- 8
- Pads
- 9
- SMD
- 4.2×2.5
MCP73831-4-MC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.40V, Tri-State Status Output, in DFN-8 package
- Pins
- 8
- Pads
- 9
- SMD
- 4.2×2.5
MCP73831-5-MC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Tri-State Status Output, in DFN-8 package
- Pins
- 8
- Pads
- 9
- SMD
- 4.2×2.5
MCP73832-2-MC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Open-Drain Status Output, in DFN-8 package
- Pins
- 8
- Pads
- 9
- SMD
- 4.2×2.5
MCP73832-3-MC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, Open-Drain Status Output, in DFN-8 package
- Pins
- 8
- Pads
- 9
- SMD
- 4.2×2.5
MCP73832-4-MC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.40V, Open-Drain Status Output, in DFN-8 package
- Pins
- 8
- Pads
- 9
- SMD
- 4.2×2.5
MCP73832-5-MC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Open-Drain Status Output, in DFN-8 package
- Pins
- 8
- Pads
- 9
- SMD
- 4.2×2.5
LMH7324
Comparator
Quad 700 ps High Speed Comparator with RSPECL Outputs, WQFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 5.9×5.9