Components
232 components matching “battery”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
BQ25040
Battery_Management
1.1A, single cell Li-ion battery charger with 50mA LDO, up to 30V input, WSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.3×3.5
BQ25886RGE
Battery_Management
Standalone 2-Cell (Li-Ion / Li-Polymer), 2A Boost-Mode Battery Charger With PowerPath, USB BC1.2 Detection, USB On-The-Go Boost (OTG), 4.3..6.2V VBUS, 8.2/8.4/8.7/8.8V charge voltage, 9.2V BATOVP, 1.5MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ25887RGE
Battery_Management
I2C Controlled 2-Cell (Li-Ion / Li-Polymer), 2A boost-mode battery charger with cell balancing for USB input, 3.9..6.2V VBUS, 3.4..4.6V charge voltage regulation range (per cell), 1.5 MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ27441DRZR-G1B
Battery_Management
System Side Li Ion/Polymer Fuel Gauge, 4.30-4.35V, PDSON-12
- Pins
- 13
- Pads
- 13
- SMD
- 4.9×3.4
BQ27441DRZT-G1B
Battery_Management
System Side Li Ion/Polymer Fuel Gauge, 4.30-4.35V, PDSON-12
- Pins
- 13
- Pads
- 13
- SMD
- 4.9×3.4
BQ27750
Battery_Management
System Side Li Ion/Polymer Fuel Gauge, VSON-12
- Pins
- 13
- Pads
- 13
- SMD
- 4.9×3.4
BQ29330DBT
Battery_Management
2/3/4 Cell Lithium-Ion or Lithium-Polymer Battery Protection AFE, TSSOP-30
- Pins
- 30
- Pads
- 30
- SMD
- 7.7×8.3
BQ76930DBT
Battery_Management
Lithium battery monitor, 6-10 cells, integrated balancing, I2C interface, TSSOP-30
- Pins
- 30
- Pads
- 30
- SMD
- 7.7×8.3
BQ76940DBT
Battery_Management
Lithium battery monitor, 9-15 cells, integrated balancing, I2C interface, TSSOP-44
- Pins
- 44
- Pads
- 44
- SMD
- 7.4×11.9
BQ78350DBT
Battery_Management
Lithium battery fuel gauge, battery management controller for BQ769x0, TSSOP-30
- Pins
- 30
- Pads
- 30
- SMD
- 7.7×8.3
BQ78350DBT-R1
Battery_Management
Lithium battery fuel gauge, battery management controller for BQ769x0, TSSOP-30
- Pins
- 30
- Pads
- 30
- SMD
- 7.7×8.3
DS2745U
Battery_Management
Current-flow, voltage and temperature measurement to support battery capacity monitoring, 2.5V to 4.5V VDD, -40 to +85 degree Celsius, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 5.9×3.6
LC709203FQH-02TWG
Battery_Management
Single LiPo battery fuel gauge, I2C, type 02, WDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 5.2×3.5
LC709203FQH-03TWG
Battery_Management
Single LiPo battery fuel gauge, I2C, type 03, WDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 5.2×3.5
LC709203FQH-04TWG
Battery_Management
Single LiPo battery fuel gauge, I2C, type 04, WDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 5.2×3.5
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
LT3652IDD
Battery_Management
Step-down battery charger for solar power, Lithium Phosphate (LiFePO4), Lead (Pb), Lithium+ (Li+) , 4.95V to 32V VDD, 2A, -40 to +125 degree Celsius, DFN-12
- Pins
- 13
- Pads
- 13
- SMD
- 4.3×3.5
LTC2959
Battery_Management
Ultra-Low Power Battery Gas Gauge with Temperature, Voltage Measurement, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.1×3.6
LTC4001
Battery_Management
Single cell (4.2V) programmable synchronous buck Li-Ion charger, 2A, 5.5V input, QFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
LTC4001-1
Battery_Management
Single cell (4.1V) programmable synchronous buck Li-Ion charger, 2A, 5.5V input, QFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
LTC4002EDD-4.2
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
LTC4002EDD-8.4
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 8.9-22V input, double cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
LTC4002ES8-4.2
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LTC4002ES8-8.4
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 8.9-22V input, double cell, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4