Components
461 components matching “i2c”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
PCA9531PW
Driver_LED
8-bit PWM I2C eight LED driver, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
EMC2301-x-ACZL
Driver_Motor
Single RPM-Based PWM Fan Controller, up to 26 kHz, 3.3V power supply, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
EMC2302-x-AIZL
Driver_Motor
Dual RPM-Based PWM Fan Controller, up to 26 kHz, 3.3V power supply, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
EMC2303-x-KP
Driver_Motor
Multiple RPM-Based PWM Fan Controller for 3 Fans, up to 26 kHz, 3.3V power supply, VQFN-12
- Pins
- 13
- Pads
- 13
- SMD
- 5.2×5.2
TCA6408APW
gekkio-Gekkio_Interface_Expansion
Low-Voltage 8-Bit I2C and SMBus I/O Expander With Interrupt Output, Reset, and Configuration Registers, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
PCA9517ADP
gekkio-Gekkio_Interface
Level translating I2C-bus repeater, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 5.9×3.6
PIC18F45K50-IP
gekkio-Gekkio_MCU_Microchip_PIC18
32K Flash, 2K RAM, 256B EEPROM, Microchip PIC18F series enhanced flash microcontroller with USB, DIP-40
- Pins
- 40
- Pads
- 40
- THT
- 17.3×51.3
PIC18LF45K50-IP
gekkio-Gekkio_MCU_Microchip_PIC18
32K Flash, 2K RAM, 256B EEPROM, Microchip PIC18F series enhanced flash microcontroller with USB, DIP-40
- Pins
- 40
- Pads
- 40
- THT
- 17.3×51.3
DS2484Q
Interface_Expansion
I2C to 1-Wire bridge, single-channel (master device), adjustable timing and sleep mode, WSON-8 (Maxim TDFN-8 / T823+1)
- Pins
- 9
- Pads
- 9
- SMD
- 4.1×2.5
DS2484R
Interface_Expansion
I2C to 1-Wire bridge, single-channel (master device), adjustable timing and sleep mode, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
LTC4314xGN
Interface_Expansion
Pin-Selectable, 4-Channel, 2-Wire Multiplexer with Bus Buffers, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 6.9×9.3
LTC4314xUDC
Interface_Expansion
Pin-Selectable, 4-Channel, 2-Wire Multiplexer with Bus Buffers, QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 4.3×5.3
LTC4316xDD
Interface_Expansion
Single I2C/SMBus Address-Translator, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.5
LTC4317
Interface_Expansion
Dual I2C/SMBus Address-Translator, DFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.0×5.6
MCP23017x-x-ML
Interface_Expansion
16-bit I/O expander, I2C, interrupts, w pull-ups, GPA7/GPB7 output only (https://microchip.my.site.com/s/article/GPA7---GPB7-Cannot-Be-Used-as-Inputs-In-MCP23017), QFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 7.2×7.2
MCP23017x-x-SO
Interface_Expansion
16-bit I/O expander, I2C, interrupts, w pull-ups, GPA7/GPB7 output only (https://microchip.my.site.com/s/article/GPA7---GPB7-Cannot-Be-Used-as-Inputs-In-MCP23017), SOIC-28
- Pins
- 28
- Pads
- 28
- SMD
- 11.9×18.4
MCP23017x-x-SP
Interface_Expansion
16-bit I/O expander, I2C, interrupts, w pull-ups, SPDIP-28
- Pins
- 28
- Pads
- 28
- THT
- 9.7×36.1
MCP23017x-x-SS
Interface_Expansion
16-bit I/O expander, I2C, interrupts, w pull-ups, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
MCP23018x-x-SO
Interface_Expansion
16-bit I/O expander, I2C interface, open-drain outpus (with configurable pull-up resistors), 2 interrupt outputs, SOIC-28
- Pins
- 28
- Pads
- 28
- SMD
- 11.9×18.4
MCP23018x-x-SP
Interface_Expansion
16-bit I/O expander, I2C interface, open-drain outpus (with configurable pull-up resistors), 2 interrupt outputs, DIP-28
- Pins
- 28
- Pads
- 28
- THT
- 9.7×36.1
MCP23018x-x-SS
Interface_Expansion
16-bit I/O expander, I2C interface, open-drain outpus (with configurable pull-up resistors), 2 interrupt outputs, SSOP-24
- Pins
- 24
- Pads
- 24
- SMD
- 9.4×8.7
PCA9536DP
Interface_Expansion
4-bit I2C-bus and SMBus IO port, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 5.9×3.6
PCA9537
Interface_Expansion
4-bit I2C-bus and SMBus IO port with interrupt and reset, TSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
PCA9538D
Interface_Expansion
8-bit I/O expander, I2C / SMBus interface, interrupt and reset pins, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4