Components
152 components matching “3.0”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
STP16CP05P
Driver_LED
16-bit constant current LED sink driver, 5..100mA output current, 20V driving capability, 3.0..5.5V power supply, QSOP-24
- Pins
- 24
- Pads
- 24
- SMD
- 7.4×9.2
STP16CP05T
Driver_LED
16-bit constant current LED sink driver, 5..100mA output current, 20V driving capability, 3.0..5.5V power supply, SOIC-24
- Pins
- 24
- Pads
- 24
- SMD
- 7.7×8.3
BU4830G
gekkio-Gekkio_Power_Supervisor
Low Voltage Standard CMOS Voltage Detector, 3.0V threshold, active low output (open drain), SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
AP2138N-3.0
gekkio-Gekkio_Regulator_Linear
3.0V 250mA Ultra Low Quiescent Current CMOS LDO, SOT-23-3
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.4
AP2139AK-3.0
gekkio-Gekkio_Regulator_Linear
3.0V 250mA Ultra Low Quiescent Current CMOS LDO, Active High Enable with Quick Discharge, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP1811Ax-030LT
gekkio-Gekkio_Regulator_Linear
3.0V, 150mA, Ultra-Low Quiescent Current LDO Regulator with Output Discharge, SOT-353
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
MCP1811Bx-030LT
gekkio-Gekkio_Regulator_Linear
3.0V, 150mA, Ultra-Low Quiescent Current LDO Regulator, SOT-353
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
MCP1812Ax-030LT
gekkio-Gekkio_Regulator_Linear
3.0V, 300mA, Ultra-Low Quiescent Current LDO Regulator with Output Discharge, SOT-353
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
MCP1812Bx-030LT
gekkio-Gekkio_Regulator_Linear
3.0V, 300mA, Ultra-Low Quiescent Current LDO Regulator, SOT-353
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
TPS7A0230PDBV
gekkio-Gekkio_Regulator_Linear
200-mA Nanopower Iq Low-Dropout Voltage Regulator with Fast Transient Response, Active Discharge, 3.0V, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
ISL3281ExHZ
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 5.5V, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
ISL3283ExHZ
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 5.5V, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
ISL3284ExHZ
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 5.5V, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
ISL3295xxH
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 7V, Low-Power, SOT-23
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
MAX3226
Interface_UART
Single RS232 driver/receiver, 3.0V to 5V supply, 250kb/s, AutoShutdown Plus, SSOP-16 package
- Pins
- 16
- Pads
- 16
- SMD
- 9.1×6.7
MAX3227
Interface_UART
Single RS232 driver/receiver, 3.0V to 5V supply, 1Mb/s, AutoShutdown Plus, SSOP-16 package
- Pins
- 16
- Pads
- 16
- SMD
- 9.1×6.7
FT601Q
Interface_USB
USB 3.0 Super-Speed to 32 bits Sync FIFO, QFN-76
- Pins
- 77
- Pads
- 77
- SMD
- 10.3×10.3
GL3224-ONY
Interface_USB
USB 3.0 Dual LUN Memory Card Reader Controller, external firmware support (SPI Flash Memory), WQFN-48
- Pins
- 49
- Pads
- 49
- SMD
- 8.3×8.3
CA-IS3721CHG
Isolator
Dual-channel digital isolator, 3.0 to 5.5V supply, 40Mbps, 5kV isolation, default output high, SOIC-8 (300 mil)
- Pins
- 8
- Pads
- 8
- SMD
- 13.0×6.4
CA-IS3721CHS
Isolator
Dual-channel digital isolator, 3.0 to 5.5V supply, 40Mbps, 3.75kV isolation, default output high, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
CA-IS3721CLG
Isolator
Dual-channel digital isolator, 3.0 to 5.5V supply, 40Mbps, 5kV isolation, default output low, SOIC-8 (300 mil)
- Pins
- 8
- Pads
- 8
- SMD
- 13.0×6.4
CA-IS3721CLS
Isolator
Dual-channel digital isolator, 3.0 to 5.5V supply, 40Mbps, 3.75kV isolation, default output low, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MSP432E401Y
MCU_Texas
ARM Cortex-M4F MCU, 1024KB flash, 256KB RAM, 6KB EEPROM, 120MHz, 3.0-3.6V, TQFP-128
- Pins
- 128
- Pads
- 128
- SMD
- 17.3×17.3
GD25D10CT
Memory_Flash
1Mbit, 3.0V Standard and Dual Serial Flash, JEITA SOIC-8 (SOP-8)
- Pins
- 8
- Pads
- 8
- SMD
- 7.3×5.4