Components
347 components matching “i”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
NC7SVU04P5X
74xGxx
High-Speed Logic Inverter, SOT-353
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
CD74HC4067SM
74xx
High-Speed CMOS Logic 16-Channel Analog Multiplexer/Demultiplexer, SSOP-24
- Pins
- 24
- Pads
- 24
- SMD
- 9.4×8.7
SSM2017P
Amplifier_Audio
Self-Contained Audio Preamplifier, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
NCS20072DM
Amplifier_Operational
Dual, 2.8V/µs, Rail-to-Rail Output, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
OPA365xxDBV
Amplifier_Operational
50-MHz, Zero-Crossover, Low-Distortion, High CMRR, RRI/O, Single-Supply, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
OPA810xDBV
Amplifier_Operational
140-MHz, Rail-to-Rail Input and Output, FET-Input Operational Amplifier, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TLC27M2xPW
Amplifier_Operational
LinCMOS Precision Dual Operational Amplifiers, VIO_max = 10mV (at 25°C), VDD = 3..16V (C suffix) / VDD = 4..16V (I / M suffix), 525kHz unity-gain bandwidth (VDD = 5V, TA = 25°C), TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.7×3.5
LTC2508CDKD-32
Analog_ADC
32-Bit Oversampling ADC with Configurable Digital Filter, 0°C to 70°C, DFN-24 package
- Pins
- 25
- Pads
- 25
- SMD
- 5.0×7.6
AD5689RxRUZ
Analog_DAC
Dual, 16-Bit nanoDAC+ with 2 ppm/°C Reference, SPI Interface, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
MAX14778
Analog_Switch
Dual ±25V Above- and Below-the-Rails 4:1 Analog Multiplexer, TQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 6.2×6.2
MAX324CUA
Analog_Switch
Dual SPST CMOS Analog Switches, normally ON, 60Ohm Ron, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
CS4245
Audio
104 dB, 24-Bit, 192 kHz Stereo Audio CODEC, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
LC709203FQH-02TWG
Battery_Management
Single LiPo battery fuel gauge, I2C, type 02, WDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 5.2×3.5
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
LTC4002EDD-4.2
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
MAX1873REEE
Battery_Management
Charger for 2 lithium-ion (Li+), 5/6 NickelCadium (NiCD) cells or 5/6 NickelMetalHydride (NiMH), 9 to 28V VDD, -40 to +85 degree Celsius, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
MCP73831-3-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73832-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73871-3CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
ATA00F18S-L
Converter_DCDC
Artesyn 2W Isolated DC/DC Converter Module, 3.3V Output Voltage, 9-36V Input Voltage
- Pins
- 7
- Pads
- 7
- SMD
- 19.8×24.5
NCS1S1203SC
Converter_DCDC
Isolated 1W 4:1 input DC/DC converter module, 4.5-18V input voltage, 3.3V output voltage, SIP
- Pins
- 5
- Pads
- 5
- THT
- 23.1×9.3
SLG46826G
CPLD_Renesas
GreenPAK Programmable Mixed-Signal Matrix with In-System Programmability, TSSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 7.7×7.0
1SS355VM
Diode
90V 0.1A high speed switching Diode, SOD-323F
- Pins
- 2
- Pads
- 2
- SMD
- 3.2×1.9
BAS16TW
Diode
Fast switching diode array 3 independent
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2