Components

11 components matching “Analog

A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.

11 components

Matched by name and keywords. Search by meaning instead

DG418LEUA_Maxim

SYMFP3D

Analog_Switch

Single SPST 3V Logic Compatible CMOS Analog Switch, normally OFF, 35Ohm Ron, Maxim-variant without Vlogic, MSOP-8

Pins
8
Pads
8
SMD
6.4×3.5

MAX14778

SYMFP3D

Analog_Switch

Dual ±25V Above- and Below-the-Rails 4:1 Analog Multiplexer, TQFN-20

Pins
21
Pads
21
SMD
6.2×6.2

MAX324CUA

SYMFP3D

Analog_Switch

Dual SPST CMOS Analog Switches, normally ON, 60Ohm Ron, MSOP-8

Pins
8
Pads
8
SMD
6.4×3.5

LTC1063xN8

SYMFP3D

Filter

5th-Order Active Low Pass Filter, 0.0003 to 50kHz, Butterworth Response, Clock Tunable, 100:1 Clock to Cutoff Frequency, Low DC offset, 8V Max dual supply, DIP-8

Pins
8
Pads
8
THT
9.7×10.7

DS2484Q

SYMFP3D

Interface_Expansion

I2C to 1-Wire bridge, single-channel (master device), adjustable timing and sleep mode, WSON-8 (Maxim TDFN-8 / T823+1)

Pins
9
Pads
9
SMD
4.1×2.5

PAM2305AAB280

SYMFP3D

Regulator_Switching

1A, Step-Down DC/DC-Converter, 2.8V Fixed Output Voltage, 1.5MHz, TSOT-23

Pins
5
Pads
5
SMD
4.1×3.4

CD74HC4067SM

SYMFP3D

74xx

High-Speed CMOS Logic 16-Channel Analog Multiplexer/Demultiplexer, SSOP-24

Pins
24
Pads
24
SMD
9.4×8.7

LTC2508CDKD-32

SYMFP3D

Analog_ADC

32-Bit Oversampling ADC with Configurable Digital Filter, 0°C to 70°C, DFN-24 package

Pins
25
Pads
25
SMD
5.0×7.6

AD5689RxRUZ

SYMFP3D

Analog_DAC

Dual, 16-Bit nanoDAC+ with 2 ppm/°C Reference, SPI Interface, TSSOP-16

Pins
16
Pads
16
SMD
7.7×5.5

AMC1100DWV

SYMFP3D

Isolator_Analog

Fully-differential isolated amplifier, fixed gain = 8, peak isolation voltage 4250V, transient immunity 2.5kV/us, UL1577/IEC60747-5-2 approved, SOIC-8

Pins
8
Pads
8
SMD
13.0×6.4

LMT85DCK

SYMFP3D

Sensor_Temperature

Analog temperature sensor, NTC, 0.3C accuracy, -8.2mV/C, -50C to +150C, 1.8 to 5.5V, SC-70-5

Pins
5
Pads
5
SMD
2.9×2.2