Components
12 components matching “BAT”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
BAT160S
Diode
Dual schottky barrier diode, in series, SOT-223
- Pins
- 4
- Pads
- 4
- SMD
- 8.8×7.2
BAT43W-V
Diode
30V 0.2A Small Signal Schottky diode, SOD-123
- Pins
- 2
- Pads
- 2
- SMD
- 4.7×2.3
LC709203FQH-02TWG
Battery_Management
Single LiPo battery fuel gauge, I2C, type 02, WDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 5.2×3.5
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
LTC4002EDD-4.2
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
MAX1873REEE
Battery_Management
Charger for 2 lithium-ion (Li+), 5/6 NickelCadium (NiCD) cells or 5/6 NickelMetalHydride (NiMH), 9 to 28V VDD, -40 to +85 degree Celsius, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
MCP73831-3-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73832-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73871-3CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
PCF85363ATT
Timer_RTC
Tiny Real-Time Clock/calendar with 64 byte RAM, alarm function, battery switch-over, time stamp input, I2C bus, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 5.9×3.6
BQ27441DRZR-G1B
Battery_Management
System Side Li Ion/Polymer Fuel Gauge, 4.30-4.35V, PDSON-12
- Pins
- 13
- Pads
- 13
- SMD
- 4.9×3.4
MIC845N
Comparator
Micro-Power Comparator / Battery Monitor, Active-High Open-Drain Output, SC-70-5
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2