Components
491 components matching “T”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
NCS20072DM
Amplifier_Operational
Dual, 2.8V/µs, Rail-to-Rail Output, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
AD5689RxRUZ
Analog_DAC
Dual, 16-Bit nanoDAC+ with 2 ppm/°C Reference, SPI Interface, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
MCP4921-ESN
Analog_DAC
Single 12-bit Digital to Analog Converter, SPI Interface, SOIC-8
- Pins
- 8
- Pads
- —
- Mount
- —
ADG633YCP
Analog_Switch
Triple SPDT CMOS Analog Switch, 52Ohm Ron, LFCSP-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.2×5.2
DG418LEUA_Maxim
Analog_Switch
Single SPST 3V Logic Compatible CMOS Analog Switch, normally OFF, 35Ohm Ron, Maxim-variant without Vlogic, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
MAX14778
Analog_Switch
Dual ±25V Above- and Below-the-Rails 4:1 Analog Multiplexer, TQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 6.2×6.2
MAX324CUA
Analog_Switch
Dual SPST CMOS Analog Switches, normally ON, 60Ohm Ron, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
CS4245
Audio
104 dB, 24-Bit, 192 kHz Stereo Audio CODEC, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
MAX1873REEE
Battery_Management
Charger for 2 lithium-ion (Li+), 5/6 NickelCadium (NiCD) cells or 5/6 NickelMetalHydride (NiMH), 9 to 28V VDD, -40 to +85 degree Celsius, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
MCP73871-3CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MIC845N
Comparator
Micro-Power Comparator / Battery Monitor, Active-High Open-Drain Output, SC-70-5
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
8P8C_Shielded
Connector
RJ connector, 8P8C (8 positions 8 connected), RJ31/RJ32/RJ33/RJ34/RJ35/RJ41/RJ45/RJ49/RJ61, Shielded
- Pins
- 9
- Pads
- —
- Mount
- —
NC5FAV
Connector_Audio
A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
- Pins
- 6
- Pads
- 6
- THT
- 26.3×27.8
NCJ6FI-V
Connector_Audio
Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack without switching contact, vertical PCB mount, retention spring
- Pins
- 7
- Pads
- 7
- THT
- 28.0×32.5
SpeakON_NL8
Connector_Audio
speakON Connector, Male or Female, NL8
- Pins
- 8
- Pads
- —
- Mount
- —
Conn_01x39_Pin
Connector
Generic connector, single row, 01x39, script generated
- Pins
- 39
- Pads
- —
- Mount
- —
Conn_01x50_Pin
Connector
"Generic connector, single row, 01x50, script generated"
- Pins
- 50
- Pads
- —
- Mount
- —
Conn_01x12
Connector_Generic
Generic connector, single row, 01x12, script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 12
- Pads
- —
- Mount
- —
Conn_02x16_Odd_Even
Connector_Generic
Generic connector, double row, 02x16, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 32
- Pads
- —
- Mount
- —
Conn_02x38_Odd_Even
Connector_Generic
Generic connector, double row, 02x38, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 76
- Pads
- —
- Mount
- —
Conn_2Rows-19Pins
Connector_Generic
Generic connector, double row, 19 pins, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 19
- Pads
- —
- Mount
- —
Conn_2Rows-27Pins
Connector_Generic
Generic connector, double row, 27 pins, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 27
- Pads
- —
- Mount
- —
Conn_2Rows-29Pins
Connector_Generic
Generic connector, double row, 29 pins, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 29
- Pads
- —
- Mount
- —