Components
100 components matching “cell”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
MCP73832-4-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.40V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73871-1CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.10V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MCP73871-2AA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.20V
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MCP73871-2CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.20V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MCP73871-3CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MCP73871-3CC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, 6h safety timer, 3.1V LBO threshold
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MCP73871-4CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.40V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MCP73871-4CC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.40V, 6h safety timer, 3.1V LBO threshold
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
SLM6800
Battery_Management
1.5A, 2-Cell 8.4V, standalone switch-mode Li-Ion Charger, 5Vin, 750kHz, QFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
CR2032_CR2032-BS-6-1
kiml-00-kiml-battery
Single-cell battery Battery base CR2032 SMD Battery Connectors
- Pins
- 2
- Pads
- 2
- SMD
- 32.9×21.4
BQ21040DBVR
kiml-00-kiml-battery-management
0.8-A, Single-Input, Single Cell Li-Ion and Li-Pol Battery Charger
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
LTC1502xMS8-3.3
Regulator_SwitchedCapacitor
Single Alkaline / NiCd Cell to 3.3V Regulated Charge Pump DC/DC Converter, 0.9..1.8V input, 10mA output, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LTC1502xS8-3.3
Regulator_SwitchedCapacitor
Single Alkaline / NiCd Cell to 3.3V Regulated Charge Pump DC/DC Converter, 0.9..1.8V input, 10mA output, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LT1307BCMS8
Regulator_Switching
Single Cell Micropower 600kHz PWM DC/DC Converter, 10µA Quiescent Current, MSOP-8
- Pins
- 8
- Pads
- 10
- SMD
- 6.2×3.5
LT1307BCS8
Regulator_Switching
Single Cell Micropower 600kHz PWM DC/DC Converter, 10µA Quiescent Current, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LT1307CMS8
Regulator_Switching
Single Cell Micropower 600kHz PWM DC/DC Converter, 50µA Quiescent Current, MSOP-8
- Pins
- 8
- Pads
- 10
- SMD
- 6.2×3.5
LT1307CN8
Regulator_Switching
Single Cell Micropower 600kHz PWM DC/DC Converter, 50µA Quiescent Current, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
LT1307CS8
Regulator_Switching
Single Cell Micropower 600kHz PWM DC/DC Converter, 50µA Quiescent Current, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
TP4056-42-ESOP8
Battery_Management
1A Standalone Linear Li-ion/LiPo single-cell battery charger, 4.2V ±1% charge voltage, VCC = 4.0..8.0V, SOIC-8 (SOP-8)
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4
MCP73831-2-MC
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Tri-State Status Output, in DFN-8 package
- Pins
- 8
- Pads
- 9
- SMD
- 4.2×2.5
BQ24005
Battery_Management
2-Cell Li-Ion Charge Management IC, HTSSOP-20
- Pins
- 21
- Pads
- 21
- SMD
- 7.8×7.0
LTC6804-1
Battery_Management
Multicell Battery Stack Monitor, 12-cell max, multi-chemistry, integrated balancing, stackable, serial interface, SSOP-48
- Pins
- 48
- Pads
- 48
- SMD
- 9.4×13.3
MAX17261xxWL
Battery_Management
5.1μA Multi-Cell Fuel Gauge with ModelGauge m5 EZ, WLP-9
- Pins
- 9
- Pads
- 9
- SMD
- 3.6×3.4
BQ24004
Battery_Management
2-Cell Li-Ion Charge Management IC, HTSSOP-20
- Pins
- 21
- Pads
- 21
- SMD
- 7.8×7.0