Components
139 components matching “VSSOP”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
PGA113
Analog
Zero-Drift Programmable Gain Amplifier With Mux, x1/x2/x5/x10/x20/x50/x100/x200 gains, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
TMUX154EDGS
Analog_Switch
ESD-Protected, Low Capacitance, 2-Channel, 2:1 Switch, With Powered-off Protection, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
TS5A23157DGS
Analog_Switch
Dual 10 ohms SPDT Analog Switch, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
DRV2605LDGS
Driver
Haptic driver for LRAs and ERMs with effect library, 2-5.2V, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
TCA9800
Interface
Level-Translating I2C Bus Buffer/Repeater 0.54mA Current Source, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
TS3USB30EDGSR
Interface_USB
ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
TI_SN74LVC2G66DCUR
kiml-00-kiml-74xGxx
VSSOP-8-0.5mm Analog Switches / Multiplexers
- Pins
- 8
- Pads
- 8
- SMD
- 4.6×2.5
TCA9517ADGK
Logic_LevelTranslator
Level-Translating I2C Bus Buffer/Repeater, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LM5067MM-1
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
LM5067MM-2
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
LM5067MMX-2
Power_Management
Negative Hot Swap / Inrush Current Controller with Power Limiting, TSSOP-10 (Texas DGS0010A / VSSOP)
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
LM5069MM-1
Power_Management
Hot swap & Inrush current controller with power limiting, latch off on fault, 9V to 80Vin, UVLO & OVLO, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LM5069MM-2
Power_Management
Hot swap & Inrush current controller with power limiting, auto retry on fault, 9V to 80Vin, UVLO & OVLO, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
REF6025xDGK
Reference_Voltage
2.5V 0.05% 4mA Extremely Low Noise High Precision Voltage Reference, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
REF6030xDGK
Reference_Voltage
3.0V 0.05% 4mA Extremely Low Noise High Precision Voltage Reference, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
REF6033xDGK
Reference_Voltage
3.3V 0.05% 4mA Extremely Low Noise High Precision Voltage Reference, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
REF6041xDGK
Reference_Voltage
4.1V 0.05% 4mA Extremely Low Noise High Precision Voltage Reference, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
REF6045xDGK
Reference_Voltage
4.5V 0.05% 4mA Extremely Low Noise High Precision Voltage Reference, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
REF6050xDGK
Reference_Voltage
5.0V 0.05% 4mA Extremely Low Noise High Precision Voltage Reference, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LM3478QMM
Regulator_Controller
2.97~40V Wide Input Range Boost/SEPIC/Flyback DC-DC Controller, AEC-Q100 Qualified, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LP2951-3.0_VSSOP
Regulator_Linear
Micropower Voltage Regulators with Shutdown, 100mA, Fixed Output 3.0V, LDO, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LP2951-3.3_VSSOP
Regulator_Linear
Micropower Voltage Regulators with Shutdown, 100mA, Fixed Output 3.3V, LDO, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LP2951-5.0_VSSOP
Regulator_Linear
Micropower Voltage Regulators with Shutdown, 100mA, Fixed Output 5.0V, LDO, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LP3982IMM-1.8
Regulator_Linear
1.8V, 300mA, Micropower, Ultra-Low-Dropout, Low-Noise CMOS Regulator, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5