Components
1,232 components matching “interface”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
MCP3550-50-EMS
Analog_ADC
Single Delta-Sigma 22bit Analog to Digital Converter, SPI Interface, 50Hz Rejection, MSOP-8
- Pins
- 8
- Pads
- —
- Mount
- —
MCP4812
Analog_DAC
2-Channel 10-Bit D/A Converters with SPI Interface and Internal Reference (2.048V)
- Pins
- 8
- Pads
- —
- Mount
- —
MCP4922-EP
Analog_DAC
Dual 12-bit Digital to Analog Converter, SPI Interface, PDIP-14
- Pins
- 14
- Pads
- —
- Mount
- —
MCP4922-ESL
Analog_DAC
Dual 12-bit Digital to Analog Converter, SPI Interface, SOIC-14
- Pins
- 14
- Pads
- —
- Mount
- —
DVI-I_Dual_Link
Connector
DVI-I dual link connector
- Pins
- 30
- Pads
- —
- Mount
- —
Thermistor_PTC_4Wire
Device
Temperature dependent resistor, positive temperature coefficient, 4-wire interface
- Pins
- 4
- Pads
- —
- Mount
- —
TCAN332G
Interface_CAN_LIN
High-Speed CAN Transceiver with CAN FD, 5Mbps, 3.3V supply, SOT-23-8/SOIC-8
- Pins
- 8
- Pads
- —
- Mount
- —
TCAN334
Interface_CAN_LIN
High-Speed CAN Transceiver, 1Mbps, 3.3V supply, low power standby mode, shutdown mode, SOT-23-8/SOIC-8
- Pins
- 8
- Pads
- —
- Mount
- —
TCAN337
Interface_CAN_LIN
High-Speed CAN Transceiver, 1Mbps, 3.3V supply, silent mode, fault output, SOT-23-8/SOIC-8
- Pins
- 8
- Pads
- —
- Mount
- —
PCF8591
Interface_Expansion
4ch ADC, 1 DAC, I2C Bus Interface, DIP/SOIC-16
- Pins
- 16
- Pads
- —
- Mount
- —
TCA9534
Interface_Expansion
8-bit I/O Expander, I2C / SMBus interface, interrupt output, fixed address bits 0b0100xxx, TSSOP-16 / SOIC-16
- Pins
- 16
- Pads
- —
- Mount
- —
FX614
Interface_Telecom
Bell 202 Compatible Modem, DIP-16/SO-16
- Pins
- 16
- Pads
- —
- Mount
- —
Z8530
Interface_UART
SCC Serial Communication Controller, DIP-40
- Pins
- 40
- Pads
- —
- Mount
- —
MB85RS256B
Memory_NVRAM
FRAM memory with SPI interface, SOIC-8 SON-8
- Pins
- 8
- Pads
- —
- Mount
- —
MB85RS2MT
Memory_NVRAM
FeRAM memory with SPI interface, 2Mbit (256K x 8), 1.8V to 3.6V supply, DIP-8 / SOIC-8 (SOP-8, 208 mil)
- Pins
- 8
- Pads
- —
- Mount
- —
MCP41050
Potentiometer_Digital
Single Digital Potentiometer, SPI interface, 256 taps, 50 kohm
- Pins
- 8
- Pads
- —
- Mount
- —
MCP42010
Potentiometer_Digital
Dual Digital Potentiometer, SPI interface, 256 taps, 10 kohm
- Pins
- 14
- Pads
- —
- Mount
- —
RFM96W-315S2
RF_Module
Low power long range transceiver module, SPI and parallel interface, 315 MHz, spreading factor 6 to12, bandwidth 7.8 to 500kHz, -111 to -148 dBm, SMD-16, DIP-16
- Pins
- 16
- Pads
- —
- Mount
- —
RFM98W-433S2
RF_Module
Low power long range transceiver module, SPI and parallel interface, 433 MHz, spreading factor 6 to12, bandwidth 7.8 to 500kHz, -111 to -148 dBm, SMD-16, DIP-16
- Pins
- 16
- Pads
- —
- Mount
- —
ADS1120-RVA
Analog_ADC
Low-power, quad-input, 16-bit analog to digital converter, integrated temperature sensor, SPI interface, QFN-16 package
- Pins
- 17
- Pads
- —
- Mount
- —
LTC1864
Analog_ADC
Single channel 16-bit SAR Analog to Digital Converter, 5V supply, differential input, 150ksps, SPI interface
- Pins
- 8
- Pads
- —
- Mount
- —
LTC1864L
Analog_ADC
Single channel 16-bit SAR Analog to Digital Converter, 3V supply, differential input, 150ksps, SPI interface
- Pins
- 8
- Pads
- —
- Mount
- —
MAX1248
Analog_ADC
4-Channel 10-Bit ADC with Serial Interface, +2.7V to +5.25V, Internal 2.5V Reference, Low-Power
- Pins
- 16
- Pads
- —
- Mount
- —
MAX1249
Analog_ADC
4-Channel 10-Bit ADC with Serial Interface, +2.7V to +5.25V, Low-Power
- Pins
- 16
- Pads
- —
- Mount
- —
