Components
45 components matching “CK”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
INA290A3xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Ultra Precise, Gain 100 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
AudioJack2_Ground_SwitchT
Connector_Audio
Audio Jack, 2 Poles (Mono / TS), Grounded Sleeve, Switched T Pole (Normalling)
- Pins
- 4
- Pads
- —
- Mount
- —
Conn_01x22_Socket
Connector
Generic connector, single row, 01x22, script generated
- Pins
- 22
- Pads
- —
- Mount
- —
Conn_02x19_Counter_Clockwise_MountingPin
Connector_Generic_MountingPin
Generic connectable mounting pin connector, double row, 02x19, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 39
- Pads
- —
- Mount
- —
Conn_02x34_Counter_Clockwise_MountingPin
Connector_Generic_MountingPin
Generic connectable mounting pin connector, double row, 02x34, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 69
- Pads
- —
- Mount
- —
R_Pack08_Split
Device
8 resistor network, parallel topology, split
- Pins
- 16
- Pads
- —
- Mount
- —
R_Pack10_Split
Device
10 resistor network, parallel topology, split
- Pins
- 20
- Pads
- —
- Mount
- —
LM4040DCK-2.0
Reference_Voltage
2.048V Precision Micropower Shunt Voltage Reference, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
LMT85DCK
Sensor_Temperature
Analog temperature sensor, NTC, 0.3C accuracy, -8.2mV/C, -50C to +150C, 1.8 to 5.5V, SC-70-5
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
8P8C_Shielded
Connector
RJ connector, 8P8C (8 positions 8 connected), RJ31/RJ32/RJ33/RJ34/RJ35/RJ41/RJ45/RJ49/RJ61, Shielded
- Pins
- 9
- Pads
- —
- Mount
- —
GTXO-14V
Oscillator
Voltage-Controlled Crystal Clock Oscillator, DIP14-style metal package
- Pins
- 4
- Pads
- 4
- THT
- 21.2×13.2
IQXO-70
Oscillator
Crystal Clock Oscillator, SMD package 7.5x5.0mm²
- Pins
- 4
- Pads
- 4
- SMD
- 8.5×6.7
NB3N511
Oscillator
3.3V / 5.0V 14 MHz to 200 MHz PLL Clock Multiplier, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
LTC3805xMSE
Regulator_Controller
Adjustable Frequency current Mode Flyback DC/DC controller, MSOP-10
- Pins
- 11
- Pads
- 11
- SMD
- 6.3×3.5
ADP1108AN-3.3
Regulator_Switching
Micropower DC-DC converter, step-up or step-down operation, 2V-30Vin, 3.3V fixed output voltage, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
APE1707M-50-HF
Regulator_Switching
2A, 150KHz PWM Buck DC/DC Converter, fixed 5.0V output voltage, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
GL2576-12TA5R
Regulator_Switching
12V 3A, 52KHz Step Down Converter, TO263-5 (D2-PAK)
- Pins
- 5
- Pads
- 5
- SMD
- 16.6×11.3
LM2575-12BU
Regulator_Switching
Fixed 12V 52kHz Simple 1A Buck Regulator, TO-263
- Pins
- 5
- Pads
- 5
- SMD
- 16.6×11.3
LT3757AEDD
Regulator_Switching
Boost, flyback, SEPIC and inverting regulator, improved load transient performance, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
PAM2305AAB280
Regulator_Switching
1A, Step-Down DC/DC-Converter, 2.8V Fixed Output Voltage, 1.5MHz, TSOT-23
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TLV62568ADRL
Regulator_Switching
High Efficiency Synchronous Buck Converter with forced PWM, Adjustable Output 0.6V-5.5V, 1A, SOT-563-6
- Pins
- 6
- Pads
- 6
- SMD
- 2.4×1.9
TPS628436YKA
Regulator_Switching
600mA Step-Down Converter with DCS-Control, ultra-low Iq, 1.8-5.5 Vin, 0.4-0.8 Vout, WLCSP-6
- Pins
- 6
- Pads
- 6
- SMD
- 2.8×3.0
DS1307N+
Timer_RTC
64 x 8, Serial, I2C Real-time clock, 4.5V to 5.5V VCC, -40°C to +85°C, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
PCF8563TS
Timer_RTC
Realtime Clock/Calendar I2C Interface, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5